mart cart 280-3500 Great Britain Electric Shopping Cart Owner’s Manual
- June 12, 2024
- mart cart
Table of Contents
mart cart 280-3500 Great Britain Electric Shopping Cart
Product Information
- Model: 280-3500 (Great Britain)
- Manufacturer: Assembled Products Corporation
- Product Line: Mart CartTM
- Website: www.martcart.com
Important Information
Congratulations!
You have just purchased the best electric shopping cart on the market today.
This Mart Cart incorporates the very latest in technological advances. To
assure you of the best and safest performance as well as longest life, please
read the enclosed information. After reading this manual, should you have a
service problem or need help, please call our Customer Service Department with
the serial number of your cart, at: (001)
479-636-5776.
Damage:
Check the shipping carton for any visible damage. Report the damage to the
freight carrier immediately. File a claim with the carrier if actual damage to
your cart has occurred. Check the contents of the carton. The contents should
agree with the information listed on the packing list. Report any
discrepancies to the carrier and the factory immediately.
To Order Parts:
Call (001) 479-636-5776. Be sure to
give the serial number to the Service Department personnel. The Mart Cart
serial number is located on the seat support tube under the seat as shown in
parts list portion of this manual.
Terms:
All parts will be shipped with an approved credit card, check in advance,
or C.O.D. Commercial accounts are allowed 15-day terms from the date on the
invoice with approved credit.
Freight:
All freight will be paid by the customer. Special consideration will be
given to items under warranty coverage.
Attention:
It is the responsibility of the owner of this cart to maintain the cart in
a safe and reliable operating condition at all times.
Note:
Specifications found in this manual are subject to change without notice.
Important Safety Instructions:
Please read before operating. with a key (if applicable), at the service
counter.
Product Usage Instructions:
Daily Maintenance Check List:
For optimum cart availability and performance, the following items should
be checked daily:
- Battery charge level
- Tire pressure
- Brakes
- Seat functionality
- The overall condition of the cart
Battery Charging Instructions:
Please read before charging.
LED Color Status:
LED Color | Status | Description |
---|---|---|
Off | Green (solid) | The off/On rocker switch is set to the Off position |
Amber (solid) | The off/On rocker switch is set to the On position – and seat |
switch is
engaged – battery is fully charged
Red – Flashing| The off/On rocker switch is set to the On position – and seat
switch is
engaged – battery is below 12.4 volts
| Battery needs to be charged – below 10.5 volts
LED Color Status (while charging):
LED Color | Status | Description |
---|---|---|
Amber – Flashing | The charger is plugged in and the battery is being charged | |
Green – Flashing | The charger is plugged in and the battery is charged |
NOTE : Under normal conditions, the battery will last more than 2 years
or longer if the above recommendations are followed. Replace with original
Mart Cart battery only. Mart Cart is not responsible for any adverse effects
caused by replacement with any other type of battery.
IMPORTANT : Your cart has been equipped with an AGM (Suspended
Electrolyte) Battery during the manufacturing process as original equipment.
The manufacturer recommends that you replace the original battery only.
IMPORTANT INFORMATION
Please read before operating.
CONGRATULATIONS!
You have just purchased the best electric shopping cart on the market today.
This Mart Cart incorporates the very latest in technological advances. To
assure you of the best and safest performance as well as longest life, please
read the enclosed information. After reading this manual, should you have a
service problem or need help, please call our Customer Service Department with
the serial number of your cart, at (001)
479-636-5776.
- DAMAGE : Check the shipping carton for any visible damage. Report the damage to the freight carrier immediately. File a claim with the carrier if actual damage to your cart has occurred. Check the contents of the carton. The contents should agree with the information listed on the packing list. Report any discrepancies to the carrier and the factory immediately.
- TO ORDER PARTS: Call (001) 479-636-5776. Be sure to give the serial number to the Service Department personnel. The Mart Cart serial number is located on the seat support tube under the seat as shown in the parts list portion of this manual.
- TERMS: All parts will be shipped with an approved credit card, check in advance, or C.O.D. Commercial accounts are allowed 15-day terms from the date on the invoice with approved credit.
- FREIGHT: All freight will be paid by the customer. Special consideration will be given to items under warranty coverage.
- ATTENTION: It is the responsibility of the owner of this cart to maintain the cart in a safe and reliable operating condition at all times.
- NOTE: Specifications found in this manual are subject to change without notice
WARNINGS
- Never attempt to charge the battery in this cart without using an electrical outlet that is protected by a GFCI.
- Replace the charging cord if the plug is damaged if the cord is worn or
- Never use the charging cord without proper Do not use it if the plug does not have three terminals.
- Never allow the cart to be used out of doors or on any surface that is not
- Always disconnect the power before
- See “Daily Maintenance Checklist,” and follow
- The cart can Enter and exit cart with care.
OPERATING PROCEDURES
-
New carts will need charging! Charge batteries for 24 hours before first
THIS CART IS FOR USE INDOORS ON A FLAT, LEVEL SURFACE ONLY. -
DO NOT STAND ON _(See “Operating & Warning Instructions” on the _cart).
-
After the battery is charged, disconnect the power supply cord BEFORE operating
-
DO NOT exceed the load limitations as shown on the
-
Return the power cord to the circular cavity when not charging
-
DO NOT allow children to operate or play on Keep the cart secured with a key (if applicable), at the service counter.
DAILY MAINTENANCE CHECKLIST
For optimum cart availability and performance, the following items should be checked daily:
- ELECTRIC CORD” Replace cord if the cord is worn or frayed, the 3-pronged plug is broken or reel (optional) will not retract. Be sure the power outlet protects an operating “Ground Fault Circuit Interrupter” (GFCI).
- SEAT AND MOUNTING: Tighten if cracks or rust occur, You have just purchased the best electric shopping cart on the market today. This Mart Cart incorporates the very latest in technological advances. To assure you of the best and safest performance as well as the longest life, please read the enclosed information. After reading this manual, should you have a service problem or need help, please call our Customer Service Department with the serial number of your cart, at (001) 479-636-5776. or if the seat rocks loosely, replace it at once.
- SEAT SWITCH: Test and replace if not working properly. The cart must stop when the weight is removed from the seat.
- THROTTLE: Test for smooth “start, acceleration, deceleration, and stop.” Repair if necessary. Charge or replace the battery if needed.
- ANTI-TIP CASTERS: Replace if broken. Maintain height adjustment of 1/8” (0.3 cm) to 1/2” (1.27 cm) above floor level.
- GENERAL: Repair or replace any component that may cause a potential safety hazard.
- APPEARANCE: Wipe off and clean as needed for customer satisfaction and the store’s public image
BATTERY CHARGING INSTRUCTIONS
Please read before charging
Your cart is equipped with the Intelli-Charge™ system. While operating the cart, the LED will be solid green until the battery falls below 12.4 volts and then turns into solid amber. When the battery charge falls below 10.5 volts, the LED will begin flashing red. The person riding the cart should have ample time to return the cart for charging. When the rider exits the cart, the horn will start beeping in unison with the red flashing LED. This will alert those responsible for maintaining the cart to plug in the charger. When plugged into a 120v AC wall socket, the LED will flash amber and the horn will silence. When charging is complete the LED will start flashing green. The charger may be left plugged in even longer as it will NOT harm the battery
- Install a Ground Fault Circuit Interrupter (GFCI) in the electrical circuit wherever the cart is to be This is to protect against any possible shock hazard.
- AC voltage required is 100-240 VAC, 50/60 The current draw is 3.5 amps maximum.
- Charge the battery every night, all night, and at every When the battery is fully charged, the charger will maintain a “float voltage” which will not damage the battery.
- Do not allow the battery to fully discharge by skipping the nightly charging cycle. A fully discharged battery will take 7 hours to fully charge, so it is best not to let the battery become completely
- Do not store the cart with a discharge This can cause premature battery failure. Fully charge the battery at least every 30 days if in a low-usage location.
- No maintenance of battery is The AGM battery is maintenance free and water cannot be added.
NOTE: Under normal conditions, the battery will last more than 2 years or longer if the above recommendations are followed. Replace with original Mart Cart battery only. Mart Cart is not responsible for any adverse effects caused by replacement with any other type of battery.
IMPORTANT: Your cart has been equipped with an AGM (Suspended Electrolyte) Battery during the manufacturing process as original equipment. The manufacturer recommends that you replace the original battery only with the same type and rating to prevent damage to your cart’s internal components, or charging system, or personal injury to you and your customer.
Be Responsible! Recycle old batteries or dispose of them according to local or national codes. See the next column, under DISPOSAL. To Replace Battery: (Read precast ons on batteries, under Charging Instructions and Safety Precautions, to avoid any sparks)
- Turn off the key switch (if equipped, or flip the On/Off switch to the “Off” position). Disconnect the charger cord from the wall outlet, if plugged in.
- Reach under the right rear of the back cover and pull the latch, then tilt the chair
- Remove the rear cover.
CAUTION : Do not cross battery posts with metal objects!
- Remove othe ld battery and place nthe ew
- Before reinstalling the cover, check the wheel condition, and general condition of the
- Reinstall the rear cover and tilt the chair
- Test cart for proper Charge battery if necessary.
ADDITIONAL INFORMATION
SEAT LOCK
For XTi 12 with a sliding seat. The seat lock and the chair should be
inspected daily for proper function. The release/locking arm should move
freely and spring back into the locking position. If the return spring is
broken, DO NOT USE the cart until the spring is replaced.
SEAT SWITCH
The seat switch is located under the seat. Pressure (weight) on the seat
closes the control circuit and allows the cart to operate.
VARIABLE SPEED CONTROL
The cart’s speed is regulated by a potentiometer. This provides extremely
smooth acceleration from 0 to 3.54 KPH and is located in the control box on
the steering column.
CIRCUIT BREAKER
The circuit breaker is designed to protect your electrical system from
transient overloads or electrical shorts. Either could cause serious damage
without a circuit breaker to open the circuit. The circuit breaker is a manual
reset type. It requires manual resetting once it has been tripped. It is
located on the battery cover.
CHARGING
HOW IT WORKS:
When the power supply cord is plugged into the store’s electrical outlet the
battery charger is energized. The charger sends approximately 14.5 volts to
the battery for charging. A third wire (yellow) from the charger output
inhibits the PWM until the power to the charger is disconnected. The motor
circuit is interrupted until charging is complete. NOTE: The cart will not
move under power when the battery is being charged. If the cart moves while
plugged in, check the power to your outlet before calling for service.
CONTROL BOX
The master control box is located on top of the steering column. It contains
the RUN/STOP/HORN switch, and key switch (optional keyless system available).
The cover can be removed by removing the four bottom screws. Our models are
equipped with the Intelli-Charge™ system, a bicolor LED can be found in the
RUN/STOP/HORN switch.
COMPONENTS:
NOTE : Parts are ordered in Contol Box Kits below
CONTROL BOX KITS:
DECALS FOUND ON MART CART® ELECTRIC SHOPPING CART
Please call (001) 479-636-5776 if your
decals are missing or are needing replacement.
Item | Part No. | Description |
---|---|---|
1 | 280-1818 | Main Frame (280-1820 w/bumper) |
2 | 000-1224 | 1.63 cm (5/8”) Bushing (2 on ea. wheel) |
3 | 280-1268 | 20.3 cm (8”)Wheel, Poly-U |
4 | 000-1075 | 1.63 cm (5/8”) “E” Type Retaining Ring |
6 | 280-1261 | Seat Mount Tube |
7 | 280-1799 | Fuse, 5 AMP Mini |
8 | 260-1228 | Circuit Breaker, 15 AMP |
9 | 200-1558 | Mart Cart Seat with Arms (not shown) |
9A | 200-1281 | Mart Cart Seat without Arms |
10 | 280-1264 | Basket Tube |
11 | 200-1802 | Basket, LIL Max |
12 | 200-1236 | Basket Mounting Clip (4) |
13 | 200-1052 | 5 cm (2”) Caster |
14 | 280-1600 | Hub Motor/Wheel/Tire |
15 | see pg. 3 | Steering Column |
16 | 280-1214 | Battery, 35 Ahr |
17 | 280-1484 | Seat Switch |
18 | 280-1936 | 12 VDC Charger -10 AMP |
Item | Part No. | Description |
--- | --- | --- |
19 | 280-1712 | Main Wire Harness |
20 | 280-1943 | Steering Wire Harness w/Connectors |
21 | 280-1281 | Floor Cover |
22 | 280-1280 | Rear Cover (select color option) |
23 | 280-1279 | Front Cover (select color option) |
24 | 280-1711 | Spring Latch for Seat |
25 | 280-0140 | PWM Controller |
26 | 280-1488 | Armrest Set w/Brackets (not shown) |
26A | 200-1780 | Armrest Pads (not shown) |
27 | 280-1269 | Fork Assembly |
28 | 280-1441 | Bridge Cover |
29 | 280-1346 | Tire/Outer Shell |
30 | 280-1797 | Charging Cord, coiled |
31 | 280-1626 | Wire Guide (see note) |
32 | 280-1840 | Rear Bumper |
33 | see pg. 3 | Control Box |
34 | 280-1614 | Basket bumpers (gray) |
35 | 280-1637 | Cord Cover (see note) |
36 | 280-1335 | Grommet, 1.63 cm (5/8”) |
37 | 280-1646 | Wire Harness (see note) PWM to Motor |
38 | 280-1659 | Cord Cover Lid (see note) |
NOTE : #31 (wire guide) and #37 (wire harness) can be ordered as assembly part 280-1656 #35 (cord cover) & #38 (cord cover lid) can be ordered as assembly part 280-0004
Optional Parts
Item Part Description
- 290-1385 Small Basket
- 280-1374 Jumbo Basket (w/castors & lower shelf)
- 200-8153 Folding Produce Tray
- 280-1586 Check-Writer
- 280-1653 Safety Flag
- 200-1393 Cord Reel – 6’
- 280-1956 Hour Meter
- 200-1728 Crutch Holder Assembly
Part Description
- 200-1558 Seat with Arms
**Electrical Schematic
**
MATERIAL SAFETY DATA SHEET
115 E. Linden • Rogers, Arkansas 72756 USA
479-636-5776 • Fax:
479-636-3245 International (001)
479-636-5776 www.martcart.com
800-548-3373
MC1-MODEL 3500-OM-180829-GB
Specifications are subject to change without notice.
Printed in the USA
Documents / Resources
| mart
cart 280-3500 Great Britain Electric Shopping
Cart
[pdf] Owner's Manual
280-3500 Great Britain Electric Shopping Cart, 280-3500, Great Britain
Electric Shopping Cart, Electric Shopping Cart, Shopping Cart
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>