LD Systems LDDQORCB DQOR Loud Speakers Instruction Manual

LD Systems LDDQORCB DQOR Loud Speakers

Product Information

Cluster Mount Bracket for DQOR Loudspeakers

Description

The robust mounting bracket for DQOR speakers is designed for ceiling or floor mounting. It is made of powder-coated steel and offers a clean and elegant solution for indoor and outdoor installations. The bracket features internal cable routing and two safety lugs to secure the mounted speakers. It is available in black (LDDQORCB) and white (LDDQORCBW) color options. The mounting holes in the support plates are compatible with the wall brackets CURV500 WMB(W), LDSATWMB10(W/B), and SUWMB10(W/B).

Safety Information

• Please read these instructions carefully before you start installation and assembly.
• Keep all information and instructions in a safe place.
• Follow the instructions.
• Only use the accessories in the manner intended.

Product Information

The product is designed for use with DQOR speakers and is suitable for ceiling or floor mounting. It is made of powder-coated steel and features internal cable routing for a clean installation. The bracket has two safety lugs to secure the mounted speakers. It is available in black (LDDQORCB) and white (LDDQORCBW) color options.

Usage Instructions

1. Remove the product from the packaging and remove all packaging material.
2. Check that the delivery is complete and intact. If the delivery is incomplete or damaged, inform your sales partner immediately after purchase.
3. Ensure you have suitable mounting material, such as screws, nuts, and washers, for all connections. No installation material is included in the scope of delivery of the bracket.
4. If performing overhead installation, it requires extensive experience including calculation of working load limits, installation materials used, and regular safety checks of all installation materials and equipment. If you do not have these qualifications, seek the help of professional companies to perform the installation.

Disposal

Packaging:

1. Packaging can be fed into the recycling system via the usual disposal channels.
2. Separate the packaging according to the disposal laws and recycling regulations in your country.

Product:

Dispose of the product in accordance with the disposal regulations in force in your country.

Manufacturer’s Declarations

Manufacturer: Adam Hall GmbH
Address: Adam-Hall-Str. 1, D-61267 Neu Anspach
Email: [email protected]
Phone: +49 (0)6081 / 9419-0
Warranty Conditions and Limitation of Liability:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS- DECLARATIONS_LD_SYSTEMS.pdf

For service, please contact your sales partner.

Misprints and errors, as well as technical or other changes are reserved!

This file has been cleaned of potential threats.
If you confirm that the file is coming from a trusted source, you can send the following SHA-256 hash value to your admin for the original file.
b16f2640e652c844ff7daba6ae16bf5ec55363f78fc1596964fa7905f03439b3
To view the reconstructed contents, please SCROLL DOWN to next page.

DESCRIPTION

The robust mounting bracket for DQOR speakers for ceiling or floor mounting is made of powder-coated steel. Due to the internal cable routing, it offers a clean and elegant solution, both indoors and outdoors. In addition, the bracket has two safety lugs to secure the mounted speakers. The bracket is available in black (LDDQORCB) and white (LDDQORCBW). The mounting holes in the support plates are compatible with the wall brackets CURV500 WMB(W), LDSATWMB10(W/B) and SUWMB10(W/B).

SAFETY INFORMATION

1. Please read these instructions carefully before you start installation and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Only use the accessories in the manner intended.
   DANGER: KEEP AWAY FROM CHILDREN! THE PRODUCT CONTAINS SMALL PARTS THAT CAN BE SWALLOWED AND PACKAGING MATERIAL THAT CAN BE SWALLOWED! PLASTIC BAGS MUST BE KEPT OUT OF REACH OF CHILDREN!

PRODUCT INFORMATION

This item is a product-specific accessory intended for use exclusively with LD Systems DQOR loudspeakers and SATWMB10, SUWMB10 and CURV500WMB wall mounts. These installation instructions do not replace the operating instructions for the associated product. Always read the corresponding instruction manual first. These accessories do not affect the intended use of the associated product. Observe the safety instructions from the operating manual of the associated product! The technical data specified in the operating technical data may change in connection with this accessory.

FEATURES

• Mounting bracket for up to four DQOR Loudspeakers
• Optimal for a full 360° sound coverage
• Designed for ceiling and floor mounting
• Pole allows internal cable routing
• Compatible with DQOR wall mount as well as CURV500 WMB, SAT WM10B and SUWMB10(W/B)
• Typical application examples: Shopping centres, supermarkets, warehouses, amusement parks and various others.

PACKAGING CONTENT

Remove the product from the packaging and remove all packaging material. Please check that the delivery is complete and intact and inform your sales partner immediately after purchase if the delivery is incomplete or damaged.
Included in the packaging content of LDDQORCB(W) are:

• 1 x cluster mount bracket DQOR CB, black (white)
• Assembly instructions

MANUFACTURER’S DECLARATIONS

MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
Adam Hall GmbH, Adam-Hall-Str. 1, D-61267 Neu Anspach
E-Mail [email protected] / +49 (0)6081 / 9419-0.
Our current warranty conditions and limitation of liability can be found at:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS- DECLARATIONS_LD_SYSTEMS.pdf In case of service, please contact your sales partner.

DISPOSAL

Packaging:

1. Packaging can be fed into the recycling system via the usual disposal channels.
2. Please separate the packaging according to the disposal laws and recycling regulations in your country.

Product:
Dispose of the product in accordance with the disposal regulations in force in your country.
Misprints and errors, as well as technical or other changes are reserved!

ASSEMBLY

No installation material, such as screws, nuts and washers, is included in the scope of delivery of the bracket. Use only suitable mounting material for all connections.

DANGER: Overhead installation requires extensive experience, including calculation of working load limits, installation materials used, and regular safety checks of all installation materials and equipment. If you do not have these qualifications, do not attempt to perform an installation yourself, but use the help of professional companies. There is a risk that equipment that is not properly installed and secured will come loose and fall. This can cause serious injury or death to persons.

MOUNTING STEPS

1. Screw the bracket to a ceiling (or floor) with sufficient load-bearing capacity at a suitable location.

2. Screw the DQOR mounting plate (or SATWMB10, SUWMB10 or CURV500WMB) to the desired support plate of the bracket. The screw holes have an M4 thread.
   Tighten the screws using lock nuts and suitable washers.

3. A Mounting holes for DQOR wall bracket for ceiling mounting,
   B Additional mounting holes for DQOR wall bracket for floor mounting
   C Mounting holes for CURV500 WMB(W), LDSATWMB10(W/B), SUWMB10(W/B)
   When mounting wall brackets and loudspeakers, pay attention to the total load capacity of the DQORCB and the load capacity per support plate!

DIMENSIONS

SPECIFICATIONS

LD Systems® is a registered brand of the Adam Hall Group
Adam Hall GmbH | Adam-Hall-Str. 1 | 61267 Neu-Anspach | Germany | Phone: +49 6081 9419-0 | adamhall.com

References

• Eventtechnik Lösungen | Adam Hall Group

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>