AMIRRO LED Bath Mirror Environment Round Sensor Instruction Manual
- June 12, 2024
- AMIRRO
Table of Contents
AMIRRO LED Bath Mirror Environment Round Sensor
Dimension
A x B x C
Tools
Installation Instruction
When the mirror is plugged in, the sensor backlight turns on. Before using the sensor for the first time (and after each power failure), it is necessary to wait for about 1 minute before the device is formatted (do not touch the switches or test its functionality)! To turn on the mirror light, briefly touch the backlit symbol. Press the light briefly repeatedly to turn off the lights.
The luminaire on this product contains a light source with energy efficiency
class E. Neither the built-in ballast nor the light source of the luminaire
can be replaced. At the end of the luminaire‘s life or if the luminaire is
damaged.
Have the luminaire replaced by a suitably qualified specialist; we will not be
liable for any damage in other cases.
It is best to treat the mirror with clean water using a soft cotton cloth and always dry it quickly and thoroughly, especially its edges, so that water does not get into the mirror from the sides and damage it. Do not use window cleaners, many cleaners containing chlorine-based compounds can cause a defect known as a „black edge“ if the cleaner is left in contact with the edge of the mirror for too long.
Customer Support
Tel.: 00420 326 997 386 , info@amirro.cz
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>