AMIRRO AMBIENTE Oval Sensor Bathroom Mirror Installation Guide
- June 12, 2024
- AMIRRO
Table of Contents
AMBIENTE Oval Sensor Bathroom Mirror
Installation Guide
AMBIENTE OVAL SENZOR
AMBIENTE Oval Sensor Bathroom Mirror
A x B x C
When the mirror is plugged in, the sensor backlight turns on. Before using the
sensor for the first time (and after each power failure), it is necessary to
wait for about 1 minute before the device is formatted (do not touch the
switches or test its functionality)!
To turn on the mirror light, briefly touch the backlit symbol. Press the light
briefly repeatedly to turn off the lights.
LED The luminaire on this product contains a light source with energy
efficiency class E. Neither the built-in ballast nor the light source of the
luminaire can be replaced. At the end of the luminaire‘s life or if the
luminaire is damaged. Have the luminaire replaced by a suitably qualified
specialist; we will not be liable for any damage in other cases.
It is best to treat the mirror with clean water using a soft cotton cloth and
always dry it quickly and thoroughly, especially its edges, so that water does
not get into the mirror from the sides and damage it. Do not use window
cleaners, many cleaners containing chlorine-based compounds can cause a defect
known as a „black edge“ if the cleaner is left in contact with the edge of the
mirror for too long.
Tel.: 00420 326 997 386 ,
info@amirro.cz
AMIRRO, s.r.o.,
Documents / Resources
|
AMIRRO AMBIENTE Oval Sensor Bathroom
Mirror
[pdf] Installation Guide
10602938, AMBIENTE, AMBIENTE Oval Sensor Bathroom Mirror, Oval Sensor Bathroom
Mirror, Bathroom Mirror, Mirror
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>