robustel R2011 Industrial Cellular Router Instruction Manual

: June 12, 2024
: robustel

Table of Contents

INTRODUCTION
KEY FEATURES
APPLICATION EXAMPLE
SPECIFICATIONS
ORDERING INFORMATION
ORDERING INFORMATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

robustel R2011 Industrial Cellular Router

INTRODUCTION

The Robustel R2011 Industrial Cellular Router is a rugged, versatile 4G router with 5 Ethernet ports, dual SIM single standby capability and a range of advanced functions for mission critical IoT or M2M applications.
The R2011 runs on Robustel’s own Linux based Operating System, RobustOS.
Developed entirely in-house, this gives way to a very high standard of technical support and high reliability. Robustel offers a Software Development Kit (SDK) to allow additional customization by using C, C++. It also provides rich Apps to meet fragmented IoT market demands such as:
RobustVPN – Highly flexible hosted VPN service so customers can easily enjoy a “fixed IP router”
Data-Guard – Invaluable failsafe in case of a system failure and runaway data usage Smart Reboot – SMS tool to push roaming SIMs from a non-working to working state
Smart Roaming – Provides you with device-assisted intelligent network selection for roaming SIMs to improve performance and reduce risk.
RCMS is Robustel’s free router monitoring service that is fully compatible with the R2011. It allows customer to see a location overview of their routers quickly and simply on a map. Features such as data usage, signal strength, current network and much more can then be viewed on a per router basis. Over-the-air updates are supported for Firmware, router configuration and Apps serving as essential ‘insurance’ if anything was not quite right during deployment.

You can try Robustel’s free router management platform by signing up here: https://rcms-cloud.robustel.net

KEY FEATURES

▶ Dual-SIM redundancy for continuous cellular network connections
▶ Link Manager supports Cellular WAN, Ethernet WAN, WLAN WAN link backup and ICMP detection
▶ WAN – Static/DHCP Client
▶ RobustOS + SDK + Apps
▶ IPSec/OpenVPN/GRE/Wireguard VPN capabilities
▶ Management and maintenance via Web/RCMS Cloud
▶ Auto reboot via SMS/time schedule
▶ Robust industrial design (9 ~ 36 V DC, desktop or wall mounting or DIN rail mounting

APPLICATION EXAMPLE

SPECIFICATIONS

Cellular Interface|
---|---
Number of antennas| 2 (MAIN + AUX) or 1 (MAIN)
Connector| SMA-K
SIM| 2 x Mini SIM (2FF)
Ethernet Interface|
Number of ports| 5 x 10/100 Mbps, 5 x LAN or 4 x LAN + 1 x WAN
WAN port| Supports 802.3at PD feature (optional)
Magnet isolation protection| 1.5 KV
Wi-Fi Interface|
Number of antennas| 2 (Wi-Fi1 + Wi-Fi2)
Connector| RP-SMA-K
Standards| 802.11 b/g/n, supporting AP and Client modes
Frequency bands| 2.4 GHz
Security| WEP, WPA, WPA2
Encryption| 64/128 AES, TKIP
Data speed| 2 x 2 MIMO, 300 Mbps
Others|
Reset button| 1 x RST
LED indicators| 1 x RUN, 1 x MDM, 1 x Wi-Fi, 3 x RSSI
Built-in| Watchdog, Timer
Software (Basic features of RobustOS)
Network protocols| PPP, PPPoE, TCP, UDP, DHCP, ICMP, NAT, HTTP,
| HTTPs, DNS, ARP, BGP, RIP, OSPF, NTP, SMTP,
| Telnet, VLAN, SSH2, DDNS, etc
VPN tunnel| IPsec, OpenVPN, GRE, WireGuard
Firewall| DMZ, anti-DoS, Filtering (IP/Domain name/
| MAC address), Port Mapping, Access Control
Remote management| Web, CLI, SMS
Supported programming language
Flash available for SDK
RAM available for SDK| C, C++
16 MB
64 MB
App Center (Available Apps for RobustOS)

*Request on demand. For more Apps please visit www.robustel.com.

| L2TP, PPTP, DMVPN , VRRP, QoS, Captive Portal,
WLAN Multi AP, SNMP, Language, RCMS
Power Supply and Consumption
Connector
Input voltage
Power consumption| 2-pin 3.5 mm female
9 ~ 36 V DC
Idle: 70 mA@12 V
Data link: 660 mA (peak)@12 V
Physical Characteristics

Ingress protection
Housing & Weight
Dimensions
Installations
Operating temperature
Storage temperature
Relative humidity

| IP30
Metal, 350g
127 x 82 x 30 mm
Desktop, wall mounting and 35 mm DIN rail mounting
35 ~ +75°C
-40 ~ +85°C
5% ~ 95%
Regulatory and Type Approvals

Environmental
EMI
EMS

| ROHS 2.0
EN 55032 Conducted Emission class B
EN 55032 Radiated Emission class
IEC 61000-4-2 (ESD) Level 4
IEC 61000-4-3 (RS) Level 2
IEC 61000-4-4 (EFT) Level 2
IEC 61000-4-5 (Surge) Level 2
IEC 61000-4-6 (CS) Level 2
IEC 61000-4-11 (DIP)

ORDERING INFORMATION

(Standard Model)

Model| PN| LTE Category| Frequency Bands| Country/Region| Certification (In progress)
---|---|---|---|---|---
R2011-A-4L-A23CN| B070710| Cat 4| 4G : LTE FDD: B1/B3/B5/B8 LTE TDD: B34/B38/B39/B40/B41
3G : WCDMA: B1/B5/B8 2G : GSM: B3/B8| China, India| CCC*
R2011-A-4L-A12EU| B070712| Cat 4| 4G : LTE FDD: B1/B3/B7/B8/B20/B28A LTE TDD: B38/B40/B41
3G : WCDMA: B1/B8 2G : GSM: B3/B8| EMEA| CE, UKCA
R2011-A-4L-A03AU| B070702| Cat 4| 4G : LTE FDD: B1/B2/B3/B4/B5/B7/B8/B28 LTE TDD: B40
3G : WCDMA: B1/B2/B5/B8 2G : GSM: B2/B3/B5/B8| South America, Oceania| RCM

* For more information about frequency bands in different countries, please contact your Robustel sales representative.

ORDERING INFORMATION

(With PoE-PD Model)

Model| PN| LTE

Category

| Frequency Bands| Country/Region| Certification (In progress)
---|---|---|---|---|---
R2011-B-4L-A23CN| B070711| Cat 4| 4G : LTE FDD: B1/B3/B5/B8 LTE TDD: B34/B38/B39/B40/B41
3G : WCDMA: B1/B5/B8 2G : GSM: B3/B8| China, India| CCC*
R2011-B-4L-A12EU| B070713| Cat 4| 4G : LTE FDD: B1/B3/B7/B8/B20/B28A LTE TDD: B38/B40/B41
3G : WCDMA: B1/B8 2G : GSM: B3/B8| EMEA| CE, UKCA
R2011-B-4L-A03AU| B070706| Cat 4| 4G : LTE FDD: B1/B2/B3/B4/B5/B7/B8/B28 LTE TDD: B40
3G : WCDMA: B1/B2/B5/B8 2G : GSM: B2/B3/B5/B8| South America, Oceania| RCM

For more information about frequency bands in different countries, please contact your Robustel sales representative.
Note: Due to short supply of PoE-PD models, please confirm the lead time with your sales manager.

Email: info@robustel.com
Website: www.robustel.com
© 2022 Guangzhou Robustel Co., Ltd.
All rights reserved. Subject to change without notice