SIKO SATBSFU271KPU Fusion without Drain Lever Round Basin Mixer Instruction Manual
- June 12, 2024
- SIKO
Table of Contents
SIKO SATBSFU271KPU Fusion without Drain Lever Round Basin Mixer
Product Information
Product Name: SATBSFU271
Product Name: SATBSFU285 –
Product Name: SATBSFU222 –
Product Name: SATBSFU268
Product Usage Instructions
Cleaning Recommendation:
-
To avoid damage and reclamations, it is necessary to consider certain criteria when cleaning the fittings and showers.
It is important to note the following: -
Do not use abrasive cleaning powders, sponge pads, or microfiber cloths with an abrasive effect.
-
Use a specified cleaner dosage, contact time, and object-related and adapted needs.
-
Residues of liquid soaps, shampoos, and shower foams can cause damage, so rinse with clean water after using.
-
If surfaces are already damaged, the use of cleansers may worsen the damage. In such cases, components with damaged surfaces must be exchanged to prevent injury.
-
Improper treatment that results in damage will not be covered by the guarantee.
Guarantee Conditions:
Under the terms of the garantee, it is necessary to install filtration
equipment distribution (corner valve filter).
Contact Information:
For any inquiries or assistance, please contact:
Email: info@siko.cz
Website: www.siko.cz
Phone: 150 150
Note : The remaining text in the user manual does not provide relevant
product information or usage instructions.
DIMENSIONS
SATBSFU271
SATBSFU285
SATBSFU222
SATBSFU268 SATBSFU222, SATBSFU268, SATBSFU271, SATBSFU285 SATBSFU271
1 | NDSIKOBSEL2 |
---|---|
2 | NDSIKOBSEL3 |
5 | NDSIKOBSEL6 |
6 | NDSATFU6 |
7 | NDSATFU7 |
SATBSFU285
1 | NDSIKOBSEL2 |
---|---|
2 | NDSIKOBSEL3 |
5 | NDSIKOBSEL6 |
6 | NDSATFU6 |
7 | NDSATFU7 |
SATBSFU222
1 | NDSIKOBSELNB2 |
---|---|
2 | NDSATFUNB2 |
4 | NDSIKOBSELNB12 |
5 | NDSATFUNB5 |
6 | NDSIKOBSELNB10 |
7 | NDSATFUNB7 |
8 | NDSATFUNB8 |
SATBSFU268
1 | NDSIKOBSELNB2 |
---|---|
2 | NDSATFUNB2 |
4 | NDSIKOBSELNB12 |
5 | NDSATFUNB5 |
6 | NDSIKOBSELNB10 |
7 | NDSATFUNB7 |
8 | NDSATFUNB8 |
Cleaning Recommendation
To avoid damage and reclamations, it is necesary to consider certain criteria when cleaning.At the cleaning of the fittings and showers, in principle, it must be pointed out:
- Only use cleaning material which is explicitly provided for this type of application.
- Never use cleaning materials, which contain hydrochloric acid, formic acid, chlorine pale lye or acetic acid, as they cause considerable damage.
- Phosphorus acidic cleaners are only conditionally applicable.
- Mixing cleaning agents is not permitted, generally.
- Never use cleaning materials or appliances with an abrasive effect, such as unsuitable clearing powders, sponge pads or micro fibre cloths.
- The instructions of the cleaning agent manufacturers have to be followed absolutely.
- Cleaning has to be carried out with a specified cleaner dosage, contact time, object-related and adapted to the needs.
- The building up of calcifications has to be removed by cleaning regulary.
- When using spray cleaners, spray first onto a soft cloth or sponge never directly onto the sanitary tapware, as drops could enter openings and gaps and cause damage.
- After cleaning rinse thoroughly with clean water to remove any cleaner residue.
- The use of steam cleaners is not permitted. The high temperatures can damage the products.
Important
Residues of liquid soaps, shampoos and shower foams can also cause damage,
so rinse with clean water after using.
The damage of already damaged surfaces will deteriorate under the effect of
the cleansers. Components with damaged surfaces must be exchanged, otherwise
there could be an injury danger.
Damage caused by improper treatment will not be covered by guarantee.
Under terms of the guarantee is necessary to install filtration equipment
distribution (corner valve filter).
Contact
SWISS AQUA TECHNOLOGIES CZ S.R.O.
SKORKOVSKÁ 1310, KYJE, 198 00 PRAHA 9
IČO: 08028834
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>