Viaggio PK190 Quadrato Linen Rosette with Brass Knob Instructions
- June 12, 2024
- VIAGGIO
Table of Contents
Viaggio PK190 Quadrato Linen Rosette with Brass Knob
Product Information
- MEASURE FROM THE FLOOR TO THE CENTER OF EXISTING LOCKS, AND USE THIS DISTANCE AS THE CENTER OF THE DUMMY MOUNT. IF THERE ARE NO EXISTING LOCKS, POSITION THE DUMMY MOUNT 36″TO 38″ FROM THE FLOOR.
- FOLD TEMPLATE ALONG DOTTED LINE, AND POSITION FOLD ON THE EDGE OF THE DOOR. TAPE TEMPLATE TO FACE OF DOOR.
- BEFORE DRILLING VERIFY THE BACKSET OF YOUR EXISTING DOORS IN YOUR HOUSE. DRILL PILOT HOLES USING A 5/64″ DIAMETER BIT.
- INSERT FOUR WOOD SCREWS, SLIDE ROSETTE OVER DUMMY MOUNT.
- INSTALL RUBBER WASHER ON KNOB/LEVER.
- SLIDE KNOB/LEVER ONTO DUMMY MOUNT WITH HEX SCREW ON BOTTOM.
- FIRMLY PRESS AND HOLD KNOB/LEVER AGAINST DOOR, AND TIGHTEN HEX SCREW WITH INCLUDED WRENCH.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>