SIKO SLP12R Urinal Villa without Lid Instruction Manual

ISO 9001:2015
SLP 12R
Instructions for use
Urinal Vila with a radar flushing unit, 24 V DC
http://www.sanela.cz/slp-12r

Function

Mounting instructions

Supplied equipment
SLP 12R – Obj. č. (Code Nr.) – 01124

Installation

| A| B| C| D| E| F| G| H| I| J| K| L
---|---|---|---|---|---|---|---|---|---|---|---|---
[mm]| 415| 190| 180| 375| | | | | | | |

1. Waste pipeline Ø 50 mm
2.  Holes for urinal attachment
3. Water inlet G3/4″
4. 24 V DC power cable
5. Inlet fitting a rubber seal
6. Mounting box with fitting and valve

„~A“ for the height of the front edge of the urinal 650 mm above the floor

|
---|---
|

It is necessary, for the proper function, to keep the unit under constant voltage (don´t connect the power supply unit behind the switch into the light circuit)! Recommended accessories
SLA 11 plastic urinal screen orange colour – mango scent
SLA 11A plastic urinal screen red colour – kiwi and grapefruit scent
SLA 11B plastic urinal screen transparent colour – honeysuckle scent
SLA 11C plastic urinal screen blue colour – cotton bloom scent
SLD 04 remote control for setting of radar flushing units and piezo controls
SLZ 01Y external power supply 24V DC for operating of max 5 pc. of flushing units
SLZ 01Z external power supply 24V DC for operating of max 9 pc. of flushing units
SLZ 04Y external power supply 24V DC on DIN rail, for operating of max. 5 pcs. of flushing units
SLZ 04Z external power supply 24V DC on DIN rail, for operating of max. 9 pcs. of flushing units
SLZ 04X external power supply 24V DC on DIN rail, for operating of max. 15 pcs. of flushing units
SLR 22 mounting frame for plasterboard constructions, for mounting to the floor and to the back wall, is destined for ceramic urinals and Sanela stainless steel urinals (SLPN 07, SLPN 09) and infra-red flushing unit, which is placed above the urinal (SLP 02, SLP 06)
More information
It is recommend to check up the sifter of electromagnetic valve once a year, because of there is a possibility that valve could be fouled up. Checking of tightening of screw connections and connectors contact surfaces is also recommend once a year.
It is necessary to proceed according to the law about packaging material after unpacking of the product.
Producer assures that this product has declaration of conformity in accordance with the regulation 73/23/EHS and 92/31/EHS.

01/2022

Documents / Resources

| SIKO SLP12R Urinal Villa without Lid [pdf] Instruction Manual
SLP12R Urinal Villa without Lid, SLP12R, Urinal Villa without Lid, Villa without Lid, Lid
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>