TRUSYO M-410RG 2.4G Wireless Mouse User Guide
- June 12, 2024
- TRUSYO
Table of Contents
TRUSYO M-410RG 2.4G Wireless Mouse
Product Information
The product is a 2.4G Wireless mouse with the brand name BRANDTRUSYO TEST:M-410RG. It is designed to provide a convenient and efficient way to navigate and interact with your computer. Themouse features an optical sensor with adjustable sensitivity of800/1200/1600dpi, allowing you to customize the cursor speed according to your preference. It also has five buttons and a scroll wheel, providing additional functionality for various tasks.
Product Usage Instructions
Before using the wireless mouse, it is recommended to read the user manual thoroughly and keep it for future reference.
- Ensure that your computer is compatible with the mouse. The mouse is compatible with Windows 2000, ME, XP, WIN7, WIN8, and WIN10 operating systems.
- Insert the batteries into the mouse following the polarity markings.
- Plug the USB receiver into an available USB port on your computer.
- Turn on the mouse by sliding the power switch located at the bottom of the device.
- Wait for the computer to recognize the wireless mouse. This may take a few moments.
- Move the mouse to test its functionality. The cursor on the screen should correspond to the movement of the mouse.
- To adjust the cursor speed, press the DPI button located on the mouse. Each press will cycle through the available sensitivity options (800dpi, 1200dpi, 1600dpi).
- To perform a left-click, press the left button on the mouse.
- To perform a right-click, press the right button on the mouse.
- To scroll through documents or web pages, use the scroll wheel located between the left and right buttons.
- For additional functionality, use the other buttons on the mouse as per your requirements.
Caution: Any changes or modifications to the mouse not expressly approved by the responsible party may void the user’s authority to operate the equipment. The mouse comes with a one-year warranty.
- Product designation: 2.4G Wireless mouse
- BRAND： TRUSYO
- TEST: M-410RG
For your personal enjoyment, we recommend that you read this manual thoroughly before using this product and keep this manual handy for reference if needed.
Specifications
- 800/1200/1600dpi optical sensor
- 5 buttons + 1 scroll wheel
Installation and use
- Open the battery case which is in the bottom of mouse.
- Put the 1*AA batteries into the slot according to the polarity mark
- Get out of the nano receiver from the slot on the bottom
- Plug the nano receiver into the available USB port of computer
- Wireless setup is ok in seconds. You can work freely
- When you feels very slowly to move the mouse, it should be the battery’s power running low. Please consider to take new batteries instead
- For the nano receiver, as suggestion it’s better to be inserted it in the computer and don’t get away. Of course, you can store the receiver into the mouse slot too.
Caution:
- The mouse is 2000,ME, XP ，
- WIN7，WIN8,WIN10
Warranty
- One year warranty.
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By proper waste handling of this product you ensure that it has no negative consequences for the environment and human health, which could otherwise be caused if this product is thrown into the garbage bin. The recycling of materials will help to conserve naturalresources.For more details information about recycling of this product, please contact your local city office, your householdwaste disposal service or the shop where you purchased the product.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.