My Weigh MTITAN Titan Heavy Duty Digital Bathroom Scale Instruction Manual
- June 12, 2024
- My Weigh
Table of Contents
Capacity 150kg x 0.1kg
330Ib x 0.2Ib
MTITAN Titan Heavy Duty Digital Bathroom Scale
Thank you for purchasing the My Weigh® Titan™ bathroom scale. Please read all
operating instructions carefully before use. This electronic scale is a
precision instrument.
With normal care and proper treatment, it will provide years of reliable
service. For more information please visit
www.myweigh.com
OPERATION INSTRUCTIONS
Batteries
Insert 3 AAA batteries into the battery compartment on the bottom (underside)
of the scale. Be sure the polarity (+ /-) is correct when installing batteries
Weighing
Step onto the centre of the scale. The display will show “0.0 Ib” (or 0.0 kg)
and then your weight will be displayed when the reading is steady.
Power off
The power will shut down automatically after no operation is detected for
about 30 seconds.
Units
To change the units move the switch underneith the scale. It is possible to
change between kg/Ib/st
IMPORTANT NOTES
**If the Scale ever malfunctions please try installing a new battery, sometimes a low battery or defective battery may cause inaccurate readings or other errors. ”
- If the display indicates” Lo “when the scale starts, it means the battery needs to be replaced. .
- When over-loaded,”EEEE” will be displayed.
- Use the unit on hard, flat, dry and secure surface only.
- Place the unit in an area free from high temperature or high humidity. To clean, use dampened cloth and mild detergent.
- Avoid excessive impact or vibration to the unit.
- If you do not intend to use this unit for a long period of time, remove the battery before storage.
- Do not attempt to disassemble the unit, otherwise the warranty will become void.
- The scale is intended for home and personal use only (not legal for commerce).
- This scale must only be used on a hard surface such as tile, wood, or linoleum.
- This and most bath scales will not perform properly on thick-carpeted surfaces.
- If the display indicates” Lo “when the scale starts, it means the battery needs to be replaced.
| Capacity | 150kg x 0.1 kg 3301b x 0.2Ib | Units | kg, lb, st |
|---|---|---|---|
| Deviation | +/- 1% | ||
| Temperature range | Optimum 15-20°C |
Power source
,| 3 x AAA alkaline batteries
, i
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>