truelife W6 BT FitScale Personal Diagnostic Bluetooth Scale Instructions

Table of Contents

FitScale W6 BT
INSTRUCTIONS

Before operating it for the first time, insert the 4 included AAA batteries into the compartment on the bottom of the scale. Make sure they are oriented according to the diagram in the compartment.
Place the scale on a flat and solid surface or mat in a dry environment.
Weigh yourself barefoot with clean feet.
If you use the scale on a soft surface or carpet, the device will not be able to optimally analyse the measured indexes.
For consistent and accurate measurement results, use the scale at the same time of day under approximately the same conditions. If possible, avoid weighing yourself in the following situations:
a. During or immediately after a strenuous workout
b. After showering, bathing or sauna
c. After heavy alcohol consumption
d. During or immediately after eating
e. During a fever

MEASURED INDEXES:

BMI (Body Mass Index) is used for the classification of underweight, overweight or various degrees of obesity. The index is calculated from height and weight.
BMR (Basal Metabolic Rate) is an index that determines the amount of energy the body requires at complete rest to maintain its basic functions.
BFR (Body Fat Rate) is an index that determines the amount of fat tissue in the body.
Body Weight, Body Fat, Muscle Density, Muscle Mass, Protein, Body Water, Bone Mass, Metabolic Age, Visceral Fat, Standard Weight, Weight Control, Lean Body Mass, Obesity Level, Score, Protein Level, Body Type.

FIRST USE, WEIGHING USING THE APP:

The TrueLife FitScale W6 BT scale can be used with smartphones running iOS or Android.
Together with the app, the scale can analyse 19 body indexes.
The scale can also be used without the mobile app, see the section „FIRST USE, WEIGHING YOURSELF WITHOUT THE APP“.

Download the app and register
a. Scan the QR code or enter the URL to install the app.
b. Register, fill in your personal details and body parameters. Next select the units for weight and height.
truelife.eu/58506/app
Pairing the scale with the app
a. Open the app and enable Bluetooth on your smartphone.
b. Agree to the processing of personal data and allow the app to access Bluetooth.
c. You can then link the app to Apple HealthKit, Fitbit or Google Fit.
d. The scale will automatically turn on when you step on the glass platform and pair with the enabled app.
Weighing yourself
a. Turn on the app and step on the scale. The scale will immediately show your weight on the display and the user P0, which is only for online measurements with the app.
b. Wait approximately another 10 seconds for the scale to fully complete your diagnostics. When complete, „testing complete“ will be displayed at the top of the app and an audible beep will sound.
c. The app will then display your full body index diagnostics and comparison with your previous results.

With the FitScale W6 BT scale, 6 indexes can be shown on the scale display without using the app.
Weighing yourself without using the app will not transfer the measured valuesto the app after logging in again.

Turn on the scale by stepping on it.
Press SET and use ▼ or ▲ to select users P1–P9.
Press SET and use ▼ or ▲ to select your body type and athlete mode if applicable.
Press SET and use ▼ or ▲ to select your height
Press SET and use ▼ or ▲ to select your age and confirm again by pressing SET.
Your user profile for use without the app is now set up.
Stand on the scale again and wait until the diagnostic indicator on the scale display stops flashing. You will then be shown the measured indexes.

The scale can remember up to 8 different users for the app and up to 9 users for weighing without the app.
If the scale contains multiple stored users with similar weights, after weighing and displaying the indexes without the app, you must use the ▼ or ▲ buttons to select a profile number and then confirm with the SET button.

After switching on the scale, you can change the measurement units using ▼ or ▲.
The selected measurement units will be automatically saved for next time under all profiles.
The measurement units can also be set using the app.

ERROR MESSAGES:

BOX CONTENTS:
1× TrueLife FitScale W6 BT
4× AAA Batteries
1× Manual
1× Safety Instructions

Dimensions: 31 cm × 31 cm × 2.5 cm
Weighing Range: 0.2~180 kg
Weighing Deviation: 0.1 kg

SAFETY WHEN WORKING WITH THE DEVICE:

Carefully read the enclosed safety instructions.
For proper handling of the product, download and read the latest version of the manual from: www.truelife.eu.

Printing errors and information changes reserved.

Manufacturer:
elem6 s.r.o.,
Braškovská 15, 16100 Prague 6,
Czech Republic