DAKOTA MICRO DMAC-TVA EnduraCam or RazerCam Camera User Manual
- June 10, 2024
- DAKOTA MICRO
Table of Contents
DMAC-TVA EnduraCam or RazerCam Camera
User Manual
DMAC-TVA EnduraCam or RazerCam Camera
AgCam®/EnduraCam®/RazerCam™ camera mates to RCA female adapter cable
Important – Read prior to operating equipment: Compatible cameras and
monitors have been tested and are verified to work with the specifications
provided below. There may or may not be other applications for this cable and
its connectors that have not been verified by Dakota Micro. In those
instances, it is the user’s responsibility to verify the equipment’s Video
Capability, Video Format, and compatible wiring connectivity. Please follow
all safety signs and precautions.
Cable Specifications
Description| This adapter cable allows for the input of one (1)
AgCam®/EnduraCam®/RazerCam™ camera into an RCA female.
---|---
Part Number| DMAC-TVA
Cable Length| 34.5 Inches
Compatible Monitors| TV Screens
Compatible Cameras| AgCam®, EnduraCam®, RazerCam™
Monitor Inputs| 1
Camera Inputs| 1
Video Capability| CVBS or AHD
Video Format| NTSC or PAL
Warranty Period| 1 Year
Cable Connectors
A. Switchcraft 5-pin Connector Female (to Camera)
B. RCA Male Connector (to Monitor/TV)
C. Power Input Port (Power Adapter Included but not Shown)
Installation Instructions
- Plug Part A into the Camera Cable.
- Plug Part B into the TV. **
- Plug Part C into the Power Source.
**See your equipment’s user manual for exact location of camera connection ports.
Consumer Limited Warranty
Subject to the disclaimer, limitations and other directions stated hereafter,
Dakota Micro, Inc. warrants that the Product will be free from defects in
material and workmanship for periods as stated hereafter from the date of
original purchase. THIS WARRANTY IS EXPRESSLY MADE IN LIEU OF ANY AND ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS. THE EXCLUSIVE REMEDY OF THE BUYER IS LIMITED TO
REPAIR OR REPLACEMENT OF THE PRODUCT. EXCEPT AS STATED IN THIS WARRANTY,
DAKOTA MICRO, INC. SHALL NOT BE LIABLE FOR ANY LOSS, INCONVENIENCE, OR DAMAGE,
INCLUDING DIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, RESULTING
FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER RESULTING FROM BREACH OF
WARRANTY, NEGLIGENCE, STRICT LIABILITY OF ANY OTHER LEGAL THEORY. Any oral
statements or representations made by anyone which are contrary to or at
variance with the terms stated in this LIMITED WARRANTY are void.
Dakota Micro, Inc. will, at its option, either repair the defect or replace
the defective Product or part thereof with a new or remanufactured equivalent
at no charge to the purchaser for parts or labor for the period of three (3)
years for AgCam® /EnduraCam® and InnoPro® cameras; two (2) years for AgCam®/
EnduraCam® monitors, and Wireless components; Twelve (12) Months for all
Overview® and RazerCamTM Cameras & Monitors, cables and all other accessories.
The Dakota Micro, Inc. limited warranty periods outlined above apply
throughout the United States and Canada only. A one (1) year maximum limited
warranty for all Products applies to all other geographic locations unless
otherwise stated in writing by Dakota Micro, Inc.
This limited warranty does not apply to any issues connected with appearance
that have no relation to the performance of the Product nor to any Product the
exterior of which has been damaged or defaced, which has been subjected to
improper voltage or other misuse, abnormal service or handling, or which has
been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser
should follow the process set forth in the Product Warranty/Repair Process,
and provide proof of purchase to Dakota Micro, Inc.
Neither the sales personnel of Dakota Micro, Inc. nor any dealer or any other
person is authorized to make any warranties other than those described herein,
or to extend the duration of any warranties beyond the time periods described
herein.
The warranties described herein shall be the sole and exclusive warranties and
remedies provided by Dakota Micro, Inc. Correction of defects, in the manner
and for the period of time described herein, shall constitute complete
fulfillment of all liabilities and responsibilities of Dakota Micro, Inc. to
the purchaser with respect to the Product, and shall constitute full
satisfaction of all claims. In no event shall Dakota Micro, Inc. be liable or
in any way responsible for any damages or defects in the Product which were
caused by repairs or attempted repairs performed by anyone other than Dakota
Micro, Inc.
Some states do not allow the limitation or exclusion of incidental or
consequential damages, so said limitation may not apply to you.
Any action at law, suit in equity, or other judicial proceeding for the
enforcement of any right provided for herein or otherwise, or with respect to
any claim that a purchaser may have against Dakota Micro, Inc. shall be
instituted only in the Courts of the State of North Dakota, either in the
state district court located in Wahpeton, North Dakota or in Federal District
Court located in Fargo, North Dakota. Without regard to conflicts of law
principles, the laws of the state of North Dakota shall govern the
interpretation and enforcement of the terms of this Limited Warranty and all
aspects of the relationship between Dakota Micro, Inc., and the purchaser.
This warranty gives you specific legal rights and you may also have other
rights, which may vary from state to state.
8659 148½ Ave. SE.
Cayuga, ND 58013
www.dakotamicro.com
Management System Registered to ISO 9001
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>