medela Hands-free Double Electric Breast Pump User Guide

**Pump In Style® WITH – CON

Double Electric Breast Pump
Extractor de leche eléctrico dobleQuick Start ENInstructions**

Hands-free Double Electric Breast Pump

Before you pump for the first time, read your breast pump instructions for use.
Download Medela Family™ App
Easily track important stats for pregnancy, baby, and breastfeeding.

https://medela.qrd.by/ud5nhe

Cleaning

How to take apart
After each use
Disassemble the individual parts (breast shield, outer shell, yellow membrane) as follows:

1. Open the collection cup using the tab at the bottom.
2. Remove the yellow membrane from the breast shield.
3. During regular washing and sanitizing, you do not need to remove the O-ring from the breast shield.

How to wash
(before first use and after each use)
Washing is important for hygiene and serves to clean the surfaces of the parts by physically removing contamination. Wash the parts either by hand or in a dishwasher. For additional cleaning guidelines see the Center for Disease Control website – https://www.cdc.gov/hygiene/childcare/breast-pump.html (US)
Do not place the parts directly in the kitchen sink for rinsing and washing. Use a dedicated wash basin for infant feeding items.
Washing in a dedicated basin

1. Rinse the disassembled parts, except for the tubing, with cold clear drinking-quality water (approx. 68 °F/20 °C).
2. Clean the parts with plenty of warm, soapy water (approx. 86 °F/ 30 °C). Use a commercially available dish soap and a clean soft brush.
3. Rinse the parts with cold clear drinking-quality water for 10 to 15 seconds (approx. 68 °F/20 °C).
4. Allow to parts to air-dry completely after washing on a clean, unused dish towel or single-use paper towel.
5. Store dry parts when not in use. Do NOT store wet or damp parts.

or
Wash in dishwasher
(maximum once per day)

1. Place the disassembled parts, except for the tubing, on the top rack or in the cutlery section. Use a commercially available dishwashing detergent.
2. Rinse the yellow membrane under running water after dishwashing.
3. Allow to parts to air-dry completely after washing on a clean, unused dish towel or single-use paper towel.
4. Store dry parts when not in use. Do NOT store wet or damp parts.

Useful information

• If using the dishwasher, parts may become discolored. This will not impact the function of the parts.

Cleaning the breast pump (as needed)

1. Turn the breast pump off.
2. Unplug the breast pump from the power source.
3. Wipe the breast pump with a clean, damp cloth and dry with a clean towel.

How to sanitize

(before first use and once per day)
Sanitizing is important for hygiene and serves to kill living organisms, such as bacteria or viruses. Boil the parts either on the stovetop or use Quick Clean™ Micro-Steam™ microwave bags.
Sanitize by boiling

1. Cover the disassembled parts, except for the tubing, with water and boil for 10 minutes. Ensure that the parts are not in direct contact with the bottom of the pot.
2. Allow water to cool and gently remove parts from water with tongs.
3. Allow to parts to air-dry completely after washing on a clean, unused dish towel or single-use paper towel.
4. Store dry parts when not in use. Do NOT store wet or damp parts.

or

Sanitize in the microwave

1. Use Quick Clean™ Micro-Steam™* bags in the microwave in accordance with the instructions on the bags. (sold separately)
2. Allow to parts to air-dry completely after washing on a clean, unused dish towel or single-use paper towel.
3. Store dry parts when not in use. Do NOT store wet or damp parts.

Do NOT clean tubing in a micro-steam bag.

• Refer to local website/shops for availability in your country.
  NOTICE
  Pump In Style® Hands-free breast pump has a closed system so milk cannot get into the tubing when the pump is used as instructed.
  Do not clean or rinse the tubing under any circumstance.

  • Inspect the tubing before use. If you find condensation, breast milk or mold in the tubing, discontinue use and replace tubing.
  • Do not run your breast pump with wet tubing; doing so will cause damage to your breast pump.

Do not clean or rinse the tubing under any circumstance.

Quick Start

1. Wash Hands-free Collection Cups’ parts – before first use and after each use
2. Sanitize Hands-free Collection Cups’ parts – before first use and once per day
3. Assemble dry Hands-free Collection Cups’ breast pump kit parts
4. Insert tubing – single (4c) or double (4d) pumping
5. Power your breast pump

Things you should know:

• If you find condensation, breast milk or mold in the tubing, discontinue use and replace tubing.

How to Use Your Medela Pump In Style Hands-free Video
Visit our website for helpful videos.

medela.qrd.by/zt65qe

Breast Shield Sizing Guide
Choosing the right breast shield size can impact your breast milk supply. Find out why and get help choosing the right size.

medela.qrd.by/sizing- guide

Download Medela Family™ App
Easily track important stats for pregnancy, baby, and breastfeeding.

https://bit.ly/MedelaFamilyDownload

Content appearance may vary from pictures.
Medela wordmark and logo and Pump in Style are
registered in the U.S. Patent and Trademark Office.
Science of Care, Quick Clean, Micro-Steam, MaxFlow
and Medela Family are trademarks of Medela.
15400091 A 0323 © 2023 Medela 101045888

References

• 15400090_Pump_In_Style_Hands-free_Collection_Cups_IFU_101045886_ES_050423.indd
• YouTube
• medela.qrd.by/sizing-guide
• medela.qrd.by/ud5nhe
• YouTube
• How to Keep Your Breast Pump Clean | CDC

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>