VSD82S Wall Hung Toilet Instruction Manual
- June 12, 2024
- VSD
Table of Contents
VSD82S Wall Hung Toilet
Product Information
This product is a toilet bowl installation kit that includes several parts: A, B, C, D, E, and F. It is used to securely install a ceramic toilet bowl onto a threaded rod.
Installation Instructions
- Start by gathering all the required parts: A, B, C, D, E, and F.
- Screw mandrel B onto the threaded rod and ensure that the notch of the screw is vertically upwards. The dimensions may vary depending on the manufacturing tolerance of the ceramics.
- Lightly screw screw D into part C.
- Screw part C onto the ceramic, inserting it under the nut seal E. Use spanner F to tighten it securely.
- Slide the ceramic onto the mandrels B.
- Tighten the screw with key A. You can use guide tubes for easier assembly. Once tightened, the installation is complete. Perform a stability check before use.
Cleaning & Maintenance
- Avoid touching acid, ammonia, chlorine, and do not use abrasive cleaners on the toilet bowl surfaces.
- When cleaning the toilet bowl, use a cloth and a mild detergent solution. Clean gently to avoid damaging the surface.
INSTALLATION INSTRUCTIONS
-
Parts list: A, B, C, D, E, F
-
Screw mandrel B onto the threaded rod and set the notch of the screw vertically upwards. The dimensions may vary, according to the manufacturing tolerance of the ceramics.
-
Lightly screw screw D into part C.
-
Screw the C part onto the ceramic, insert it under the nut seal E and tighten with the spanner F.
-
Slide the ceramic onto the mandrels B
-
Tighten the screw with key A, use guide tubes for easier assembly. Installation complete. Sit back for a stability check.
Cleaning & Maintenance
- Do not touch acid, ammonia, chlorine, do not use abrasive cleaners.
- Toilet bowl surfaces should only be cleaned gently, with a cloth and a mild detergent solution.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>