PHILIPS BY698P G5 Coreline Highbay LED Highbay User Manual
- June 12, 2024
- Philips
Table of Contents
PHILIPS BY698P G5 Coreline Highbay LED Highbay
Product Information
- Product Name: Coraline Highbay G5 LED Highbay
- Model Number: BY698P G5
- IP Rating: IP65
PHILIPS BY698P G5 Coreline Highbay LED Highbay
- Compliance: AS/NZS 60598
- Distributed by: Reduction Revolution Pty Ltd
- Website: www.reductionrevolution.com.au/LED
- Manufacturer: Signify (China) Investment Co., Ltd.
- Manufacturer Address: Building 9 #, Lane 888, Tianlin Road, Minhang District, Shanghai City, P.R. China Postcode: 200233
- Trademark: Philips and the Philips shield emblem are registered trademarks of Koninklijke Philips N.V.
Product Usage Instructions
- The luminaire should be installed by a qualified electrician in accordance with the latest IEE electrical regulations or national requirements.
- Ensure power is turned off before inspecting, installing, or removing the luminaire.
- External earthing is required before using the luminaire and should be maintained throughout its lifespan.
- The luminaire must be used within the applicable product specifications, installation instructions, and environmental conditions for storage and operation.
- Refer to application guidelines provided by Signify for product warranty validity.
- Avoid exposing the luminaire to corrosive atmospheres or hazardous materials such as sulfur, chlorine, phthalate, etc. during use and storage.
Mounting instruction
Type Desc
|
Voltage (V)
|
Frequency (Hz)
|
Power (W)
|
D(mm)
|
H (mm)
|
Weight (Kg)
|
CCT
|
Optics
---|---|---|---|---|---|---|---|---
BY698P G5 LED200 PSU CAU CL| 220-240~| 50/60| 126W| 330| 99| 2.6| 840/850| WB
BY698P G5 LED250 PSU CAU CL| 220-240~| 50/60| 157W| 393| 99| 4| 840/850| WB
BY698P G5 LED300 PSU CAU CL| 220-240~| 50/60| 192W| 393| 99| 4| 840/850| WB
Dimensions
- Suspension Mounting
- Pipe Mounting
- Bracket Mounting
- Inrush current
| BY698P LED105 PSU | 0.32 | 40 | 600 | 0.7 | 6 | 8 |
|---|---|---|---|---|---|---|
| BY698P LED150 PSU | 0.45 | 40 | 600 | 0.7 | 6 | 8 |
| BY698P LED200 PSU | 0.6 | 40 | 600 | 0.7 | 6 | 8 |
| BY698P LED250 PSU | 0.75 | 54 | 750 | 0.7 | 6 | 8 |
| BY698P LED300 PSU | 0.92 | 54 | 750 | 0.7 | 6 | 8 |
| BY698P LED105 PSD | 0.34 | 53 | 300 | 0.7 | 8 | 13 |
| BY698P LED150 PSD | 0.49 | 53 | 300 | 0.7 | 8 | 13 |
| BY698P LED200 PSD | 0.64 | 53 | 300 | 0.7 | 8 | 13 |
| BY698P LED250 PSD | 0.8 | 60 | 600 | 0.7 | 6 | 8 |
| BY698P LED300 PSD | 0.98 | 60 | 600 | 0.7 | 6 | 8 |
Warning
-
The luminaire shall be installed by a qualified electrician and wired in accordance with the latest IEE electrical regulations or national requirements.
-
Turn the power off before inspection, installation, or removal.
-
Before using, external earthing is required. Earthing is also required in its whole life.
-
The Luminaire must be used within the applicable product specifications, installation instructions, and environmental conditions for storage & operations according to application guidelines provided by Signify for the product Warranty to be valid.
-
The corrosive atmosphere or hazardous materials such as sulfur, chlorine, phthalate, etc. must be avoided during use and storage.
-
The manufacturer will not take responsibility caused by improper use or self-modifications of the product.
Power Connection -
If the external flexible cable or cord of this luminaire is damaged. It shall be exclusively replaced by the manufacturer or his service agent or a similarly qualified person in order to avoid a hazard.
Application -
For Indoor use only. This product is not suitable for cold storage areas where obvious temperature gradients are present, such as ventilation openings, doors, etc.
-
The height between the luminous surface and the ground is suggested to be more than 5m; the height between the bottom of the luminaire and the mounting surface must
be more than 0.3m. -
Similar installations or applications like flood and tunnel luminaires are NOT allowed.
-
Not suitable for use in harsh vibration and often causing vibration or swinging environment. Also, not suitable for areas prone to hurricanes and
extreme winds. -
If the customer requires the luminous surface levelness<1°, the pipe mounting method is recommended, and suggested to use a gradient to precisely measure and adjust.
Maintenance -
Periodic cleaning of the luminaire optical lens cover will ensure maximum optical efficiency. Luminaire shall be cleaned with a dry soft cloth only.
-
The light source contained in this luminaire shall only be replaced by the manufacturer his service agent or a similar qualified person.
-
The control gear contained in this luminaire shall only be replaced by the manufacturer his service agent or a similar qualified person.
-
This product contains a light source of energy efficiency class: C.
This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>