TOPDON T-Ninja Pro 8 Inch Tablet OBD Automotive Key Programmer User Guide

TOPDON T-Ninja Pro 8 Inch Tablet OBD Automotive Key Programmer

Product Information:

Product Name: T-Ninja Pro
Description: The T-Ninja Pro is a tablet device designed for automotive diagnostics and operations. It features an eight-inch touch screen, various ports for connectivity, a built-in microphone and audio speaker, and a collapsible stand for easy viewing. The device also comes with a VCI (Vehicle Communication Interface) slot for connecting to vehicles and optional accessories such as T-Darts.

Product Usage Instructions

1. Getting Started:
   • Turn on the T-Ninja Pro tablet.
   • Register and log in to your TOPDON account. If you don’t have an account, please register using your email.
2. Basic Setup:
   • Ensure the VCI is successfully connected to the T-Ninja Pro tablet via Bluetooth or USB cable.
   • The power indicator will show different colors to indicate the device’s status: Solid Red (power on), Solid Blue (Bluetooth connected), Flashing Green (communicating with the vehicle).
3. Using T-Darts (Optional Accessory):
   • Connect the T-Darts (not included) to the T-Ninja Pro tablet.
   • The T-Darts can be connected wirelessly (Bluetooth) or using a USB cable.
   • Refer to Figure 2 for the appropriate connection method.
     Note: For detailed instructions and further information, please download the detailed user manual from www.topdon.com/products/t-ninja- pro or scan the provided QR code.

Important:

• Follow the safety guidelines provided in the detailed user manual.
• Ensure compatibility with your vehicle before performing any diagnostic or operational functions.
• For any technical assistance or troubleshooting, refer to the detailed user manual or contact TOPDON customer support.

Multilingual User Manual

Thanks for purchasing the TOPDON T-Ninja Pro. This quick user guide will walk you through the basic setup and operations of the T-Ninja Pro. For further information, please download the detailed user manual via www.topdon.com/products/t-ninja-pro or through the QR code below.

• For detailed user manual, please scan the QR code.

T-Ninja Pro Tablet

CONTENT

1. Eight-Inch Touch Screen
2. Reset Button
3. Power Button
4. 3.5 mm Audio Port
5. RJ45 Port
6. USB Type-A Port
7. 12V DC Power Supply Input Port
8. HDMI Port
9. USB Type-C Port
10. Screenshot Button
11. Mic
12. TF Card Expansion Slot
13. VCI Slot
14. Camera Lens
15. Audio Speaker
16. Collapsible Stand

T-Ninja Pro VCI

1. Flashing Green: communicating with the vehicle
2. Solid Red: power on
3. Solid Blue: Bluetooth connected
4. USB Type-C Port
5. OBD-II 16 Pin Connector

T-Darts (Optional Accessory)

1. Vehicle Key Slot
2. Key Transponder Slot
3. Power Indicator (Solid blue: power on)
4. Bluetooth Connection Indicator (Solid green: Bluetooth connected)
5. Power Button
6. USB Type-C Port
7. Frequency Induction Antenna
8. Battery Compartment

Getting Started

1. Register & log in
   Turn on the T-Ninja Pro tablet and log in to your TOPDON account. (If you do not have an account, please register with your email.)

2. To perform the functions of IMMO, EOBD & OBD-II and Maintenance:

3. Plug the VCI into the vehicle’s Data Link Connector (DLC)
   The vehicle’s DLC is usually located under the dashboard.

4. Turn the ignition to the “ON” position

5. Bind the VCI
   Go to User Info > VCI Management. Tap the icon at the top right corner of the screen, and the device will ask you to connect the Bluetooth first.
   Connect the Bluetooth as prompted. Then the serial number and activation code will be automatically obtained.
   Then, tap Activate.

6. Connect the VCI to the T-Ninja Pro tablet
   The VCI can be connected to the T-Ninja Pro tablet either via wireless (Bluetooth) or wired connection (USB cable) (see Figure 1).
   : VCI is successfully connected via Bluetooth
   : VCI is successfully connected via USB cable

7. To perform the T-Darts functions:
   Connect the T-Darts (not included) to the T-Ninja Pro tablet
   The T-Darts can be connected to the T-Ninja Pro tablet either via wireless (Bluetooth) or wired connection (USB cable) (see Figure 2).

: T-Darts is successfully connected via Bluetooth

: T-Darts is successfully connected via USB cable

TEL
86-755-21612590
1-833-629-4832 (North America)

EMAIL [email protected]
WEBSITE WWW.TOPDON.COM
FACEBOOK @TOPDONOFFICIAL
TWITTER @TOPDONOFFICIAL

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
   Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

References

• TOPDON Key Programmer T-Ninja Pro – TOPDON TECHNOLOGY Co., Ltd.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>