DURACELL Mobile Inverter 150 User Guide
- June 8, 2024
- Duracell
Table of Contents
DURACELL Mobile Inverter 150 User Guide
Features
Important Safety Information
SAVE THESE INSTRUCTIONS – this manual contains safety and operating
instructions for the inverter. Misusing or incorrectly connecting the inverter
may damage the equipment or create hazardous conditions for users. Read the
following safety instructions and pay special attention to all Caution and
Warning statements in the guide.
Warnings identify conditions that may result in personal injury or loss
of life.
Cautions identify conditions or practices that may damage the unit or
other equipment.
WARNING
This guide contains important safety and operating instructions in how to use
the inverter to power loads using the AC outlet and USB port. Read this guide
fully for safe operation of this inverter.
1. Do not expose the inverter to moisture, rain, or snow.
2. Do not operate the inverter if it has received a sharp blow, been dropped,
or otherwise damaged in any way; contact the manufacturer for repair or
replacement.
3. Do not disassemble the inverter. Incorrect reassembly may result inshock
or fire hazard.
4. To reduce risk of electric shock, unplug the inverter from the DC
accessory outlet before attempting any maintenance or cleaning.
WARNING: BURN, FIRE HAZARD
The inverter housing may become warm and may reach temperatures approaching or
beyond 140 °F (60 °C) under extended high power operation. During operation,
keep it away from materials that may be affected by these temperatures. Do not
use the inverter in ambient temperatures over 104 °F (40 °C). Allow for proper
ventilation
and do not cover the ventilation openings with anything that may overheat the
inverter during operation.
Failure to follow these safety guidelines may cause personal injury and/or damage to the inverter. II may also void your product warranty.
WARNING: MEDICAL EQUIPMENT
This product is NOT tested, designed nor intended to be used with life support
systems or any other medical devices.
WARNING: PROPER APPLICATION
Do not use the appliance for any application except that for which ii is
intended.
Operating Instructions
WARNING: RISK OF UNSAFE OPERATION
When using tools or equipment. basic safety precautions should always be
followed to reduce the risk of personal injury. Improper operation,
maintenance or modification of equipment could result in serious injury and
property damage. We strongly recommend that this product NOT be modified
and/or used for any application other than for which ii was designed. Read and
understand all warnings and operating instructions before using any equipment.
- Plug the inverter into your vehicle’s accessory
- Plug an AC-powered device into the three-prong AC receptacle and turn it Make sure that the power rating of the device is less than the “peak power”of the inverter.
CAUTION: VEHICLE BATTERY DISCHARGE
Some vehicles’ DC accessory socket remain powered even when the ignition
switch
or engine is turned off. To avoid discharging the vehicle’s battery, always
remove the inverter from the DC accessory socket when not in use.
3. Plug a USS-powered device into the USB port. The USB port can be used separately and simultaneously while AC loads are connected and running via the AC receptacle.
Troubleshooting
This section will help you identify the source of most problems that can occur
with the inverter. If you have a problem with the inverter,please review this
section before contacting your dealer.
PROBLEM: Inverter does not operate.
| Posslble cause | Remedy |
|---|---|
| 1)An overload/over temperature shutdown has occurred. | Use an AC-powered |
device that has a power rating of less than the rated “peak power”. Allow the inverter to cool down, or try to reduce the ambient temperature and try again. Do not cover the
inverter’s ventilation openings.
- High starting surge has caused an overload shutdown.| Use an AC-powered device that has a surge power rating less than the surge power rating of the inverter.
- Vehicle’s ignition switch is turned off thus the DC
accessory socket is also off.
| Tum the vehicle’s ignition switch to ON. Consult your vehicle’s manual for
instructions.
4) Poor contact with the DC accessory socket.| Adjust the inverter’s DC plug
to ensure a snug fit. If needed, cleanthe DC accessory socket.
5) Vehicle battery is discharge.d| Recharge the vehicle battery.
6) Vehicle fuse blown due to heavy load on the accessory socket.| Replace the
blown fuse. Consult your vehicle’s manual for fuse location, fuse type, and
instructions.
PROBLEM: USB-powered device does not operate.
| Possible cause | Remedy |
|---|---|
| USB connector is not inserted properly into the USB port. | Ensure that the USB |
cable’s connectors are properly filled into the USB ports of either device.
Specifications
NOTE: Specifications are subject to change without notice.
DC Input Specifications
|
---|---
Input voltage range| 11-15v
Fuse| 15A (fast-blow)
AC and USB Output Specifications
AC output power (peak)| 150W
AC output power (continuous)| 100W
AC output voltage (nominal)| 115 Vac
AC output frequency| 60 Hz
AC output wave form| Modified sine wave
USB output voltage| 5Vdc
USB output current| 2.1 A
Physical Specifications
Dimensions (L x W x H)| 5.9 X 2.8 X 1.4 in.
(14.9 x 7.2 x 3.6 cm)
Weight| 0.4 lbs. (0.2 kg)
Protections
DC input over/under voltage, DC input fuse,
Over temperature, AC output overload/short circuit
General Warnings and Cautions
Interference with Electronic Equipment
Generally, most AC products operate with the inverter just as they would with
household AC powe.r Below is information concerning two possible exceptions.
Buzzing sound In audio systems and radios
Some low quality stereo systems and AM-FM radios have inadequate internal
power supply filtering and “buzz’ slightly when powered by the inverter.
Generally, the only solution is an audio product with a higher quality filter.
Television Interference
The inverter is shielded to minimize its interference with TV signals.
However, with weak TV signals interference may be visible in the form of lines
scrolling across the screen. The following should minimize or eliminate the
problem:
• Increase the distance between the inverter and the TV, antenna and cables.
• Adjust the orientation of the inverter, television, antenna and cables.
• Maximize TV signal strength by using a better antenna and use shielded
antenna cable where possible.
Recycling
Battery-Biz is committed to environmental responsibility and recommends that
electronic devices be disposed of properly. Please contact your local city
offices for information on recycling and disposal programs for e-waste.
For instructions on how to recycle this product visit www.rbrc.org.
DURACELL Mobile Inverter 150 User Guide – Download
[optimized]
DURACELL Mobile Inverter 150 User Guide – Download
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>