EarthTronics C450i23081710290 Selectable Strip Light Instruction Manual

June 12, 2024
EarthTronics

EarthTronics C450i23081710290 Selectable Strip Light

Product Information

The product is a lighting fixture manufactured by EarthTronics, Inc. It is designed for both dry and damp locations. The fixture features an LED driver and is compatible with dimming systems that use 0-10V IEC control. The product is energy-efficient and innovative.

Specifications

  • Model: 120-ZTTv
  • Input Voltage: 120-347Y
  • Wiring Diagram: Black (Line), White (Neutral), Green (Ground)

Contact Information

Installation Instruction

WARNING

  • To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards read all warnings and instructions included with and on the fixture box and all fixture labels.
  • Before installing, servicing, or performing routine maintenance upon this equipment, follow these general precautions.
  • Commercial installation, service and maintenance of luminaires should be performed by a qualified licensed electrician.
  • For the installation: If you are unsure about the installation or maintenance of the luminaires, consult a qualified licensed electrician and check your local electrical code.
  • To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
  • Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
  • Tum off electrical power at fuse or circuit breaker box before wiring fixture to the power supply.
  • Turn off the power when you perform any maintenance.
  • Verify that supply voltage is correct by comparing It with the luminaire label information.
  • All wiring connections should be capped with UL approved wire connectors.

AUCTION

  • Avoid direct eye exposure to the light source while it is on.
  • Account for small parts and destroy packing material, as these may be hazardous to children.
  • Risk of bum. Disconnect power and allow fixture to cool before changing bulb or handing fixture.

NOTICE: Green ground screw provided in proper location.Do not relocate.

  • * Minimum 90’C supply conductors.
    • Specifications and dimensions subject to change without notice.
    • Suitable for Dry or Damp locations

General Wiring Diagram

A: Chain Suspended Mounting

EarthTronics-C450i23081710290-Selectable-Strip-Light-
FIG-2

B: Surface Mounting

EarthTronics-C450i23081710290-Selectable-Strip-Light-
FIG-3

Installation Step

A: Chain Mounting with V hook

  • Step1 : Clip the brackets to the slots o1 fixture
  • Step2: Attach customer supplied V-Hooks to brackets.
  • Step3: Attach customer supplied chain to the V-hooks and mounting surface.

B : Surface Mounting

  • Step 1 : Secure the provided brackets onto the surface using the provided accessories and screws.
  • Step 2 : Screw the provided outlet box cover to the back of the housing.
  • Step 3 : Complete wiring to power supply In the Junctlon box.
  • Step 4 : Clip the brackets to the slots of fixture

Field-Adjustable Wattage & CCT

The end users may adjust the color temperature and lumen output respectively by the two DIP switch buttons integrated into the driver. Each DIP switch is accommodated with 3 options (left, middle and right ),corresponding to 3 color temperatures and 3 powers respectively, which can perform the desired color temperature and lumen output combination.

  1. DIP switches are located on the side of the fixture.(see Fig.e)
  2. Select a wattage and color temperature by sliding switch left or right respectively to the desired value.(see Fig.)

Where efficiency meets innovation.
www.earthtronics.com

CONTACT

  • ADDRESS: EarthTronics, Inc. 755 E Ellis Rd, Norton Shores, MI 49441
  • Toll Free: 866.632.7840
  • Email: contact@earthtronics.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals