EarthTronics 11698 DTD LED Barn Light Installation Guide
- June 13, 2024
- EarthTronics
Table of Contents
DTD LED BARN LIGHT
Installation Guide
Wall Mounting
- Select desired CCT & Power and DC photosensor before installation. Screw back the Cap after CCT & Power selection,
- Remove Square-type Bracket.
- Place the self-tapping screws into holes on mounting bracket, line up with holes on the wall and attach firmly with screws.
- Remove knockout from Square-type Bracket, and feed the metai pipe into the bracket.
- Feed wires through the Square-type Bracket and attach firmly to the luminaire.
- Installation completed.
Wiring Diagram
CCT & Power & Photocell Select Guidance
Warining:
- Select desired CCT & Power & Photocell before operation!
- Cap must be screwed back after CCT & Power & Photocell selection!
WARNING
PLEASE READ ALL INSTRUCTIONS BEFORE ATTEMPTING INSTALLATION
— To prevent personal injury or product damage only licensed electricians
should install.
— To avoid electric shock or component damage disconnect power before
attempting installation or servicing.
— Disconnect product and allow cooling prior to servicing.
— Any alteration or modification of this product is forbidden as it may cause
personal injury,death, propertydamage and/or product malfunction.
— To prevent product malfunction and/or electrical shock this product must be
properly grounded.
— This luminaire is designed to operate in ambient temperatures ranging from
-40°C to 45°C (~40°F to 113°F).
— CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR.
Pole Mounting
- Select desired CCT & Power and DC photosensor before installation. Screw back the Cap after CCT & Power selection.
- Remove Bar-type Bracket.
- Feed wires through the lamp-post, then wire to line voltage.
- Mount lamp body to pole, and attach the bar-type bracket firmly with screws.
- Drill holes on the wail, and put in plastic setscrews.
- Place the self-tapping screws into holes on the mounting bracket, line up with holes in wall and secure firmly with screws.
- Installation completed.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>