ALTEC LANSING MZX5201 AL Nanobuds Sport 2.0 Wireless Earbuds User Guide
- June 12, 2024
- Altec Lansing
Table of Contents
ALTEC LANSING MZX5201 AL Nanobuds Sport 2.0 Wireless Earbuds
PLEASE DO NOT RETURN TO STORE
If You’re Having Trouble, We’re Here to Help!
Call us 24/7 at 1-855-292-4087
E-mail us at [email protected] or visit us at alteclansing.co
WELCOME
Thank you for purchasing an Altec lansing product, Download our App to unlock
all the features our products have to offer!
REGISTER YOUR PRODUCT
To receive news, exclusive deals, OTA or firmware updates, warranty
information and more please register your product at
alteclansingsupport.com
follow us
@alteclasingofflcial
follow us
@alteclansing
follow us @alteclansingofficial
12 Month Limited Warranty
All Altec Lansing products come with 12 month limited warranty from the date
of its original purchase
24 Hour Customer Support
We love our customers, and we care about your experience with Altec Lansing.
If you need assistance, please call us at 1 855 292.4087 or e-mail
[email protected]
www.alteclansing.com Altec Lansing Edison,NJ
08817
In the Box
-
Nanobuds Sport 2.0 and Charging Case
-
Large
-
Standard
-
Large
-
Medium
-
Small
Different Size Ear Tips and Helix Wings
-
Medium Memory Foam Tips
-
USB-C Cable
A Closer Look
Charging
Place the earbuds into the case to charge:
Charging (indicator breathing red every 3S)
Fully charged (indicator breathing blue every 3S)
The LEDs turn off after about 60S to conserve power
The LED indicator will flash when charging:
Connect the USB-C cable into the ‘ charging port to charge the case. The case’s indicator will flash momentarily to indicate a low battery.
Powering On
For the first use, please remove the earbuds from case and remove the sticker
from both earbud charging contacts. Next, place earbuds back in case then
remove from case. This will activate earbuds.
To turn on, place earbuds into the case then remove from case. To turn
off, place the earbuds into the case.
If the LEDs do not turn on when the earbuds are removed from the case, charge the case then try again. In the event that the earbuds do not pair together, perform the Manual Reset function.
Bluetooth Pairing
The AL Nanobuds Sport 2.0 have automatic pairing technology. Once removed from
the case,they will automatically turn on and pair to each other within a few
seconds.
After the earbuds have paired to each other, to connect the earbuds to your
smartphone, go to settings then select the Bluetooth page. Look under
‘available devices’ and connect to “AL Nanobuds Sport 2.0”.
Touch Button Functions
| __ | __ |
|---|
Left Earbud:
Pause / Play : Press Once
Decrease Volume : Press Twice
Voice Assistant: Press & Hold 2 S~
Previous Selection : Press Triple
Answer Canu : Press Once
Decline can : Press & Hold 2 Sec.
Hang Up can : Press & Hold 2 Sec.
On can Mic. Mute On/Off: Press Once| Right Earbud:
Pause/Play: Press Once
Increase Volume: Press Twice
Low Latency On/Off : Press & Hold 2 Sec.
Next Selection: Press Triple
Answer Call••: Press Once
Decline Call: Press & Hold 2 Sec.
Hang Up Call: Press & Hold 2 Sec.
On Call Mic. Mute On/Off: Press Once
•Low Latency Mode reduces intrinsic Bluetooth delay for better lip-sync .
.. Answering a second call will put first on hold. When on hold triple press L
or R to switch calls.
Bluetooth Multipoint (two devices at once.)
To connect a second device turn off Bluetooth on first connected device. Now connect your second device. Turn Bluetooth back on on first device, Nanobuds Sport 2.0 will reconnect to first device and both will be connecte
Manual Reset
Soft Reset
To perform a Soft reset simply drop the earbuds back in the case and hold the
touch button, the LED will go off, let go after 2S and the earbud will be
reset without losing any pairing information. In unlikely event that you need
to fully reset the earbuds and clear their pairing information you can do a
Hard reset as follows:
Hard Reset
- Forget the earphones in your phone (important).
- Take ONE earbud out of the case. If the LED is flashing purple wait for it to go red/blue/red/blue. Now Press and Hold the earbud touch button for 12S. The LED will change to Red for SS and the earbud will reset.
- Put it back in the case and do the same operation for the other one.
- Finally take them both out together, the earbuds will flash purple while they look for each other . Then when they pair together the Primary will go Red/Blue/Red/Blue (the Secondary LED will turn off).
- The earphones are now ready to pair to your phone.
- Reconnect the earbuds to your phone. You should see them in your phones pairing list as AL Nanobuds Sport 2.0.
Notes
To use voice assistant, you must have a phone that is equipped with a voice assistant.
You must be within Bluetooth range to use voice assistant via your Wireless Earbuds.
Your Wireless Earbud’s voice assistant feature will not work if a voice
assistant is not first enabled with in phone. For more information, see your
phone’s user manual.
For additional user materials and warranty information, please visit alteclanslng.com
FCC ID: 2ALN9-TN10RH3
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
FOLLOW US ON
#myalteclansing
Documents / Resources
|
ALTEC LANSING MZX5201 AL Nanobuds Sport 2.0 Wireless
Earbuds
[pdf] User Guide
MZX5201, MZX5201 AL Nanobuds Sport 2.0 Wireless Earbuds, AL Nanobuds Sport
2.0, Wireless Earbuds, AL Nanobuds Sport 2.0 Wireless Earbuds, Earbuds
---|---