ACEFAST T9 Crystal Bluetooth Earbuds User Guide

ACEFAST T9 Crystal Bluetooth Earbuds

Product Information

• Product Name: AT9, T9/AT9
• FCC ID: A T AF C: 9 99 T9

The AT9, T9/AT9 is a transmitter device that complies with FCC radiation exposure limits and ISEDC RF radiation exposure limits for an uncontrolled environment. It also complies with the Innovation, Science and Economic Development Canada Compliance licence-exempt RSS standard(s).The device is designed to operate independently and should not be co-located or operated in conjunction with any other antenna or transmitter.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISEDC RSS Warning

This device complies with Innovation, Science and Economic Development Canada Compliance license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

ISEDC Radiation Exposure Statement

This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Product Usage Instructions

1. Ensure that the device is placed in an uncontrolled environment.
2. Avoid colocating or operating the device with any other antenna or transmitter.
3. Make sure the device complies with the Innovation, Science and Economic Development Canada Compliance license-exempt RSS standard(s).
4. Do not use the device if it causes interference or if it does not accept interference that may cause undesired operation of the device.
5. Follow the ISEDC RF radiation exposure limits and avoid co-locating or operating the device with any other antenna or transmitter.

Device activation
when using it for the first time, please remove the protective sticker of the headset and put the headset into the charging case to complete the activation. Thank you for purchasing this product. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number.

Parameter

• Bluetooth pairing name: Crystal (Air) Bluetooth Earbuds
• Bluetooth version:  Bluetooth 5.34EDR
• Audio decoding protocol:  SBC / AAC
• Transmission range: 10m
• Speaker type: Moving coil
• Speaker specifications: Moving coil 9mm
• Speaker sensitivity: 106+3dB
• Frequency range: 20Hz~20kHz
• Music time: About 6.5h (50% volume level)
• Call time: About 4h (50% volume level)
• Total working time: About 30h
• Headset battery: 40mAh
• Charging case battery: 480mAh. Can charge headset 3 times
• Headset charging time:  About 1h
• Charging case charging time: About 2h
• Charging case input: 5V0.45A
• Headset size: About 25.5×18.6×31.9mm
• Overall siz: About 51.9×53.8x21mm
• Material: PC+silicone
• Waterproof rating: IPX4

FCC ID:2AZXT-AF2105
IC:29599-T9

Product list

Instructions For Use

The left and right headsets are paired successfully by default when the product leaves the factory. Follow the steps below when connecting to the phone for the first time. 1. Take out the headsets to automatically turn on, wait for about 3 seconds, the headsets will be automatically paired. 2. Turn on the Bluetooth of the mobile phone, search for ACEFAST Crystal (Air) T9, and click to connect After the pairing is successful you will hear a prompt tone and the phone shows that it is connected When you use it again, after the headset is turned on and paired, it will automatically connect back to the connected mobile phone. If you cannot connect to the mobile phone, please manually connect to the headset from the Bluetooth menu of the mobile phone.

Prompt:
When the headset is connected to the device in order to avoid the failure of the connection between the left and non headsets, the headset needs to be taken out of the charging case at the same time. *You have 5 minutes to connect the headsets and your device, otherwise the headsets will automatically shut down, Put the headsets back into the charging case to re enter paining mode Power on without any device connected it will automatically shut down after 5 minutes The left and right headsets can be used separately. If the pairing fails for a long time, please put the headsets back into the charging case for reconnection ~If there is no sound after the left and right headsets are connected, please put the headsets back into the charging case for reconnection.

Operation Mode (Calls)

Power on

1. Take out the headset the headset will automatically turn on.
2. In the off state, touch the multifunction key once. After the headset is turned on, it enters the Bluetooth pairing state, and the LED light starts to flash.

Shutdown:
The headset is automatically turned off when it is placed in the charging case.

Answering a call:
When there is an incoming call, double-click the multifunction key.

End the call:
during the call, double-click the multifunction key.

Reject the call:
When there is an incoming call, long touch the multi-function key for 2 seconds.

Operation mode (playing music)

1. Play music: double click the multi-function key or operate the player on the mobile phone some mobile phones will automatically start the music player when connected to a Bluetooth stereo)
2. Pause the music: Double-click the multifunction key or operate the player on the phone when playing music.
3. Next song: When playing music, triple-click the multi-function key of the right headset.
4. Previous song: When playing music, triple-click the multifunction key of the left headset.
5. Volume +: Click the multi-function key on the right headset, there will be a prompt sound when the volume is at maximum.
6. Volume-: Click the multi-function key on the left headset. there will be a cromot sound when the volume is minimun
7. Wake up the voice assistant: Long touch the left/right headset multifunction key for 2 seconds.

Restore factory settings:
Long touch the left and right headset multi-function keys for 5s at the same time, the white light flashes, the reset operation is successful Que to the characteristics of Bluetooth headsets, electromagnetic wave interference in the area may cause connection interruptions or freezes. Based on the characteristics of wireless technology, when the device performs the display function and transmits the Bluetooth sound signal at the same time, there may be a “delay” in the audio signal and the video signal that is, the sound is not synchronized with the Picture.

Operation method (charging)

Digital screen display:
LR and four power bars indicate the power of the I after 15 seconds. When the headset is charging the battery bar will flash, when the headset is fully charged,the battery bar will displayed normally.

• 0-25%
• 26%~50%
• 51%~75%
• 76%-100%

After the headset is placed in the charging case, the digital display area will instantly display the current power level of the charging case. When charging the charging case, the digital screen of the charging case will light up the last digit of the battery will flash, and when the battery is fully charged, it will display OK.

Precautions for charging:
Use a charger with an output voltage of DC 5V, a USB port of a PC or a charger with a USB port output (must choose a charger that has been certified by a manufacturer).

Tips:
This product contains a built-in rechargeable lithium battery. please read battery safety warnings. It is forbidden to hit, squeeze or throw into fire. If severe swelling occurs, please do not continue to use it. Do not place it in a high temperature environment. It is forbidden to use the battery after Do not try to remove the battery from the headset to avoid damage to the headset. The headset will automatically consume power when it is shelved. Iris recommended to charge the headset every 3-6 months.

Precautions

• Do not place the headset in a place that is humid, full of dust, oily smoke or steam, or exposed to direct sunlight, Do not leave the headset in the car for a long time. Otherwise, it may cause a malfunction.
• Using this headset to listen at high volume may affect your hearing. For traffic safety, please do not use this headset while driving or cycling.
• Do not use headset in places where the inability to hear environmental sounds will cause danger, such as railway crossings, railway station platforms, pedestrian crossings, and construction sites.
• Do not place heavy objects or apply pressure on the headset, otherwise it may cause deformation of the headset during long-term storage.
• The static electricity accumulated in the body may cause slight irritation in the ears. Wearing clothes made of natural materials can minimize the impact.
• Do not subject the headset to excessive pars
• Please use a soft dry cloth to clean the headset.
• Do not expose the headset to water.
• The headset is not waterproof. Remember to observe the following precautions.
• Be careful not to let the headset fall into the sink or other containers filled with water.
• Do not use the headset in humid places or bad weather, such as rain or snow.
• Do not get the headset wet. If you touch the headset with wet hands, or put the headset in damp clothing, the headset will get wet and this may cause the headset to malfunction.
• Because the product is magnetic, keep it away from electronic products such as bank cards, mobile phones, computer monitors, TVs, etc.
• If you feel unwell after using the Bluetooth device, stop using it immediately. If the problem persists, please contact your local dealer.
• If you have any questions or problems about this headset that are not covered in this manual, please contact your local dealer. A When you feel uncomfortable wearing the headset or the sound is blocked, you can choose other types of ear caps prepared for you, which will bring you a better wearing experience and high-quality sound quality.

FCC NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter.

ISEDC RSS warning
This device complies with Innovation, Science and Economic Development Canada Compliance licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,including interference that may cause undesired operation of the device.

ISEDC Radiation Exposure Statement:
This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Warranty & Customer Support

For questions, support, or warranty claims, contact us at the mail below that corresponds with your region. Please include your Amazon order number and product mode number.

• Amazon US orders: support1@acefast.com 
• Amazon EU orders: support2@acefast.com
• Amazon UK orders: support3@acefast.com
• Amazon CA orders: support4@acefast.com
• Other region orders: support6@acefast.com

Please note, ACEFAST can provide after sales service for products purchased from any official ACEFAST store. If you have purchased from local seller, you can also contact them directly for service or warranty issues

Shenzhen Houshuxia Technology Co., LTD
wwww.acefast.com
support.@acefast.com
Rm203, 2nd Floor, Building C, Youth Pioneer Park, Jianshe East Road, Tsinghua Community, Longhua Street, Longhua District, Shenzhen, P. R. China Shenzhen 518000. China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>