Cobra DualPro 360 Degree Protection Advanced or Laser Detector with Directional Detection Owner’s Manual

Cobra DualPro 360 Degree Protection Advanced or Laser Detector with

Directional Detection

Product Information

• Menu: Press and hold the BRT and SEN buttons to access the Menu. To exit the Menu, simply wait a few seconds without pressing a button. The unit will display “Completed” to confirm your selections.

• User Mode: Allows you to access and customize all Settings and Preferences.

• Pilot: Set color to match your vehicle’s dash display – Copper/Blue/Green/Red.

• Display Color: Set color to match your vehicle’s dash display – Copper/Blue/Green/Red.

• Speed Display: Displays current speed or battery voltage.

• Speed Mute: Offers double beep alert tones below specified speed.

• Speed Alert: Reminds you when you exceed a specified speed.

• Meter Mode: Choose between Standard,
  Frequency, or Threat display modes.

• Tones: Choose between Standard Cobra alert tones or Mild doorbell chime alert tones.

• AutoMute: Automatically reduces audio during alert.

• AutoLock: Automatically stores and locks out false alarms.

• Units: Choose between English or Metric units for distance and speed.

• Language: Choose between English or Espanol for voice and text.

• Voice: Enable or disable voice announcements.

• GPS Filter: Enable or disable GPS-powered features.

• AutoPower: Set the auto power-off duration after vehicle ignition is turned off.

• Band Enables: Customize the bands you want to monitor – X Band, K Band, Ka Band, Ka-POP, Laser, TSR.

• Marker Enable: Customize the types of locations you want to mark for future reference – Redlight, Red & Speed, Speed Cam, Speed Trap, Air Patrol.

• Default Settings: Restore default settings for North America.

• Marked Lockouts: Clear all user-marked locations.

• Defender Format: Clear all DEFENDER data.

Product Usage Instructions

1. To access the Menu, press and hold the BRT and SEN buttons simultaneously.
2. To navigate through the Menu categories, press the BRT button.
3. To make a selection within a category, press the SEN button.
4. To exit the Menu, simply wait a few seconds without pressing any button.
5. To confirm your selections, look for the display message “Completed”.
6. To switch to Advanced mode and view all Preferences, switch back from User Mode to Advanced mode.
7. To customize settings and preferences, access the User Mode.
8. To set the display color to match your vehicle’s dash display, navigate to the Pilot category and choose between Copper, Blue, Green, or Red.
9. To display current speed or battery voltage, adjust the Speed Display setting.
10. To receive double beep alert tones below a specified speed, adjust the Speed Mute setting.
11. To receive reminders when you exceed a specified speed, adjust the Speed Alert setting.
12. To choose between different display modes, navigate to the Meter Mode category and choose between Standard, Frequency, or Threat.
13. To select different alert tones, navigate to the Tones category and choose between Standard Cobra alert tones or Mild doorbell chime alert tones.
14. To automatically reduce audio during alerts, enable the AutoMute setting.
15. To automatically store and lock out false alarms, enable the AutoLock setting.
16. To choose between English or Metric units for distance and speed, adjust the Units setting.
17. To choose between English or Espanol for voice and text, adjust the Language setting.
18. To enable or disable voice announcements, adjust the Voice setting.
19. To enable or disable GPS-powered features, adjust the GPS Filter setting.
20. To set the auto power-off duration after vehicle ignition is turned off, adjust the AutoPower setting.
21. To customize the bands you want to monitor, navigate through the Band Enables category and enable/disable X Band, K Band, Ka Band, Ka-POP, Laser, and TSR.
22. To customize the types of locations you want to mark for future reference, navigate through the Marker Enable category and enable/disable Redlight, Red & Speed, Speed Cam, Speed Trap, and Air Patrol.
23. To restore default settings for North America, access the Default Settings category.
24. To clear all user-marked locations, access the Marked Lockouts category.
25. To clear all DEFENDER data, access the Defender Format category.

Congratulations

Take the freedom of the road back with the Cobra Dual Pro 360, equipped with 360° high definition protection, threat direction arrows, and intelligent GPS technology to eliminate false alerts.
Go to Cobra.com for full featured Owner’s Manual.

Dual Pro 360 Features

• Dual Pro 360’s HD Performance accurately identifies real threats sooner than other detectors, and with threat direction arrows, provides you with location information about these threats.
• Updatable IVT Filter™ automatically reduces false alerts from moving In-Vehicle Technology sources such as collision avoidance systems and adaptive cruise control.
• GPS location-based intelligence automatically locks out false alerts and allows you to mark locations for future reference.
• Access to the DEFENDER Database, which warns you of verified speed traps, speed cameras, and red light cameras.
• Built in Bluetooth® technology gives you access to iRadar.
• The real-time ticket-protection network which warns you of upcoming alerts received and reported by other users in the area, and gives you access to local speed limit data for over-speed alerts.

Installation

Your new detector comes with our latest EZ Mag Mount™. Simply slide the detector onto the mounting bracket fully and that’s it. To remove the detector from the mount, simply pull the detector off the mount.
Mounting Tips:

• Center of windshield between driver and passenger.
• Ensure clear view of road ahead and sky above.
• Avoid windshield wipers and heavily tinted areas.

To mount the detector in your vehicle:

1. Remove backing from EZ Mag Mount.
2. Firmly press EZ Mag Mount onto windshield and flip locking clamp to secure.
3. Slide the detector onto the mounting bracket until it’s fully engaged. The magnet inside holds the detector in place.
4. To adjust view, loosen thumb wheel and adjust angle of mounting bracket. Tighten thumb wheel to secure.
5. To remove detector, simply pull the detector device off the mount bracket.
6. To remove mount from windshield, release locking clamp and pull tab on top of EZ Mag Mount.

EZ Mag Mount Care Instructions:

To clean your EZ Mag Mount, simply rinse under warm water, gently wipe off any debris and allow to air dry.

Connect detector to your smartphone via Bluetooth

1. Power on Dual Pro 360.
2. Install and run the Cobra iRadar app on your smartphone.
   • Note: the first time you run the app, you will be prompted to register a new account.
3. In the iRadar app. press the Settings button then select “Devices”.
4. Select “Dual Pro 360 ” from the list.
5. Dual Pro 360 will display “Connected” when it has paired. Press the settins button then Home to return to the Map screen.

Controls & Features

1. Using Dual Pro 360
2. Plug small end of SmartCord into modular jack on Dual Pro 360 and large end of SmartCord into your car’s lighter/accessory socket.
3. Dual Pro 360 should power on automatically.

If not, press the device’s power button.
NOTE: You can easily access and customize all of your Settings and Preferences by pressing and holding the MRK and SEN buttons. See Settings and Preferences for details.

Using SmartCord USB

Mute Button:

• Press to mute the audio for a specific alert.
• Press three times to lock out a false alert.
• Press twice while receiving a locked-out alert to unlock.
• When connected to iRadar press and hold the mute button on unit or cord to manually report to other users a verified X or K-band alert, or a police officer observing traffic.
• Alert   Light: Blinks red when receiving a laser alert.
• Power   Light: Lights green when device is powered on.
• USB Charging Port: Charge smartphones, tablets and other USB-chagred devices.

Menu

Press and hold the BRT and SEN buttons to access the Menu. To exit the Menu, simply wait a few seconds without pressing a button. The unit will display Completed to confirm your selections.

Settings

SEN – Sensitivity Modes

• Press SEN to adjust the X and K band radar detection sensitivity/range. Auto = speed adjusted. The slower you travel, the shorter the X and K band detection range.
• At 50 mph and above, X and K detection range is at maximum. Ka band detection range is always at maximum, regradless of the SEN setting.

Auto No X

• Auto No X works the same as Auto mode; however, X band is completely turned off.

Auto Lo K

• Auto Lo K works the same as Auto mode; however K band sensitivity is lowered.

Highway

• In this setting, Dual Pro 360 will detect all radar signals on all bands at maximum range.

Meter Mode

• Dual Pro 360 offers three settings for displaying alerts:

Standard

• The Standard option provides information on a single radar signal. When Dual Pro 360 detects radar, it displays the band of the radar (X, K and Ka), a bar graph of the front and rear signal strength
  (front is the left-most bar graph), along with front or rear arrow. When laser is detected, the display will simply read “Laser”. If there are multiple signals present, Dual Pro 360 will determine which one is the most important threat to display.

• Frequency mode is the same as Standard but adds frequency information on the displayed radar signal.

Basic

• Basic messages replace band and signal strengths. “Caution” is used when as alert is received while you are traveling below your current Speed Mute setting (or posted speed limit for current location, when connected to iRadar).
  Slow Down” is displayed when an alert is recived while you are traveling above thge current Speed Mute setting (or posted speed limit for the current location, when connected to iRadar).

Speed Mute

• The Speed Mute feature allows you to modify your alert tones when traveling below a specified speed (factory default is 20 mph; see Settings and Preferences for details). For all alerts received while traveling below the specified speed, Dual Pro 360 will sound a simple double-beep alert.

GPS Filter/Locking Out False Alerts

• Dual Pro 360 is equipped with a TrueLock GPS Filter to lock out and store in its memory false alerts. To lock out a false alert (X band, K band or laser only), press the MUTE button on the detector or the SmartCord three times durring an alert. Pressing the first time will silence the audio. Pressing a second time will generate a prompt on the display that will read “Lockout?” Press a third time to confirm you want to lock this signal out by location and frequency. A “Stored” message will be displayed. Once a signal has been stored, Dual Pro 360 will reject the signal the next time you approach this area and will display the locked out alert. To unlock a signal that has already been stored, simply press and hold the detector or SmartCord MUTE button while receiving the locked out alert.
• The display will read “Unlock?” press and hold the detector or SmartCord MUTE button again to unlock it from memory. The display will then read Unlocked” to confirm your action. For details on how to turn the GPSfilter off, refer to the Settings and Preferences section.
• NOTE: When the GPS filter is set to OFF, you do not have access to Dual Pro 360’s other GPS-enabled features (e.g., Database alerts, marking locations, etc).

Speed Alert

• With Dual Pro 360, you can set the Speed Alert to notify you when you are traveling over a specified speed (factory default is 70 mph; see Settings and Preference for details). When you travel above the speed threshold you have set, the background display for your current speed will turn red to alert you that you have exceeded the specified speed.

AutoLearn

• The AutoLearn feature analyzes (over time) the source of radar signals by location and frequency. This allows Dual Pro 360 to determine if a signal is a real threat or a false one. If it determines that the signal is an automatic door opener, motion sensor, etc., it automatically locks out this source at this particular location. A “Stored” message will appear on the display when a signal has been automatically locked out. If you prefer, you can turn the AutoLearn feature off. See the Settings and Preferences section for details.
• NOTE: AutoLearn typically needs to encounter the exact frequency in the same location approximately three times to lock it out. Since some door openers are turned on and off routinely, some variations may occur. When AutoLearn is on, Dual Pro 360 will also unlearn signals to protect you from locking out real threats. If a particular signal is no longer present at a location that was previously locked out, Dual Pro 360 will unlock that signal.

Software Updates

• Dual Pro 360’s red light and speed camera database is easily updated using our exclusive detector software tools found on our web site. Firmware, or the operating software for the detector, can also be updated using these tools. In order to have access to these updates, you must register your Dual Pro 360 at www.Cobra.com. Once registered, you will receive email notifications that updates are now available for your database or firmware. To handle your software and DEFENDER updates you need to connect your
• Dual Pro 360 to a computer first. You can connect Dual Pro 360 to a computer via USB/USB Mini B cable.

Restore Factory Settings

• To restore Dual Pro 360 to it’s original factory settings, press and hold MRK and BRT while turning the power on. A Restored message will display, acknowledging the reset.

Notes for Programming

• To view serial number and software revision press MRK and MUTE while powering on detector.

Contact Us

• 800.964.3138
• Cobra.com
• Cobra Electronics Corporation
• 6500 W. Cortland St., Chicago, IL 60707
• Cobra One Year Limited Warranty
• What this warranty covers: Cobra USA, Inc. (“Cobra”) warrants your Product against all defects in materials and workmanship.
• For how long: One (1) year from the date of original purchase from an authorized Cobra dealer.
• What we will do: If a breach of warranty occurs, Cobra, at its discretion, will either repair or replace your Product free of charge.
• What we will not do: Cobra will not pay shipping charges that you incur for sending your Product to us.
• What you must do to maintain this warranty: Show original proof of purchase or receipt from an authorized Cobra dealer.
• Warranty exclusions: This warranty does not apply to your product under any of the following conditions:

1. The serial number has been removed or modified.
2. Your product has been subjected to misuse or damage (including water damage, physical abuse, and/or improper installation).
3. Your product has been modified in any way.
4. Your receipt or proof-of-purchase is from a non-authorized dealer or internet auction site, including E-bay, U-bid, or other non-authorized resellers.
5. You are not the original purchaser of the Product from an authorized dealer or did not receive it as a gift from the original purchaser of the Product from an authorized dealer.

To obtain service

1. Contact Cobra (1-800-964-3138) to obtain a Return Authorization Number.
2. Properly pack your Product and include: your name, complete return address, written description of the problem with your Product, daytime telephone number, and a copy of the original proof of purchase or receipt.
3. Label the outside of the package clearly with your Return Authorization Number. Ship the Product pre-paid (insured, for your protection) to: Cobra Electronics Corp., 6500 W. Cortland St., Chicago, IL 60707.

LIMITATION OF WARRANTY: The obligations set forth above are Cobra’ sole obligations and your exclusive remedy. Cobra makes no other express warranty. Any implied warranty of merchantability or fitness for a particular purpose that may be applicable to the Product is limited in duration to the duration of this warranty. Some States do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Cobra SHALL NOT BE LIABLE FOR CONSEQUENTIAL, SPECIAL OR INCIDENTAL DAMAGES INCLUDING, WITHOUT LIMITATION, DAMAGES ARISING OUT OF THE USE, MISUSE OR MOUNTING OF THE PRODUCT. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Cobra is not responsible for products lost in shipment between the owner and our service center. Other legal rights: This warranty gives you specific legal rights, and you may also have other rights which vary from State to State. ©2019 Cobra®, iRadar®, and SmartShield® are trademarks of Cobra USA, Inc.. Manufactured in the Philippines. Features, specifications and prices subject to change without notice.

FCC

FCC NOTE: Modifications not expressly approved by the manufacturer could void the user’s FCC granted authority to operate the equipment.
FCC ID: QL4M6. CONTAINS FCC ID:QKLBT2
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. this device must accept any interference received including interference that may cause undesired operation.

References

• Communication Radios & Automotive Electronics | Cobra.com
• Communication Radios & Automotive Electronics | Cobra.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>