PHILIPS BT100 Wireless Portable Speakers User Manual

PHILIPS BT100 Wireless Portable Speakers

Important Safety Instructions

• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat.
• Only use attachments/accessories specified by the manufacturer.
• Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the device, the device has been exposed to rain or moisture, does not operate normally, or has been dropped.
• Devices shall not be exposed to dripping or splashing.
• Do not place any sources of danger on the device (e.g. liquid filled objects, lighted candles).
• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

Warning

• Never remove the casing of this apparatus.
• Never lubricate any part of this apparatus.
• Never place this apparatus on other electrical equipment.

Notice
Any changes or modifications made to this device that are not expressly approved by WOOX Innovations may void the user’s authority to operate the equipment.

• This product complies with the radio interference requirements of the European Community.
• Hereby, WOOX Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can find the Declaration of Conformity on www.philips.com/support.

Disposal of your old product

• Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
• When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC.
• Please inform yourself about the local separate collection system for electrical and electronic products.
• Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.
• Always bring your product to a professional to remove the built-in battery.

Environmental information

• All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.)
• Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Bluetooth

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by WOOX Innovations is under license.

Note

• The type plate is located on the bottom of the apparatus.

Your portable speaker

• Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

Introduction

• With this speaker, you can
• listen to audio from an external device via Bluetooth connection,
• listen to audio from an external device through the AUX socket, and
• make phone calls.

What’s in the box

• Check and identify the contents of your package:
• Main unit
• USB cable
• Short user manual
• Safety sheet

Overview of the speaker

Battery/Bluetooth indicator

• Lights up, flashes or turns off depending on the status of BT100.
• For details, see the following section Charging indicator and Bluetooth indicator.

Integrated microphone

• Press to answer an incoming call.
• Press to end the current call.
• Press and hold for 3s to reject an incoming call.
• Press and hold for 3s to change call between BT100 and mobile phone.
• In Bluetooth mode, press and hold for 8s to clear the pairing information.

DC IN

• Charge BT100 through the USB cable.

OFF AUX

• Slide to select Bluetooth/AUX IN mode.
• Slide to power off the speaker.

AUX

• Connect to an external player.

Get started

• Always follow the instructions in this chapter in sequence.

Charge the built-in battery
BT100 is powered by a built-in rechargeable battery

Note

• Before use, fully charge the built-in battery.

• Connect the USB cable between
• the DC IN socket on the speaker, and
• a USB socket of a computer.

Charging indicator|
---|---
 | Indicator| Battery
In Bluetooth mode| Flashing blue/Solid blue

(depending on the working status)

| Under charging
 | Flashing blue/Solid blue

(depending on the working status)

| Fully charged
In AUX IN mode| Flashing white| Under charging
 | Solid white| Fully charged
In OFF mode| Flashing white| Under charging
 | OFF| Fully charged

Note

In Bluetooth mode, when the battery is empty, BT100 turns off automatically. And the Bluetooth indicator flashes white while recharging. To return to Bluetooth mode, turn BT100 off and select Bluetooth mode again.

Select a source or turn off

• Slide the OFF AUX switch to select a source or turn off BT100.
• : Listen to an external Bluetooth device through Bluetooth connection.
• AUX IN: Listen to an external device through an audio input cable.
• OFF: Turn off BT100.

Use Bluetooth devices

With this speaker, you can listen to audio from a player and make a call through Bluetooth.

Note

• Make sure that no audio input cable is connected to the AUX socket.
• Philips does not guarantee the compatibility with all Bluetooth devices.
• Before pairing a device with this system, read its user manual for Bluetooth compatibility.
• The product can memorize a maximum of 8 paired devices.
• Make sure that Bluetooth function is enabled on your device, and your device is set as visible to all other Bluetooth devices.
• Any obstacle between this system and a Bluetooth device can reduce the operational range.
• Keep away from any other electronic device that may cause interference.

Connect a device

• Switch the slider to .
• On your Bluetooth device, search for BT100.
• In the device list, select PHILIPS BT100.
• If a message prompts for the permission for Bluetooth connection with
• PHILIPS BT100, confirm it.
• If a password is required, enter 0000 and then confirm.
• BT100 beeps twice when the Bluetooth connection is established.

Bluetooth indicator
The LED indicator on the top indicates the status of Bluetooth connection.

• Indicator Bluetooth connection
• Flashing blue Connecting or waiting for connection
• Solid blue Connected

Disconnect a device

• On your device, disable the Bluetooth connection with BT100.
• Or, on BT100, press and hold when it is not during a call.

Note

• Before connecting another Bluetooth device, disconnect the current device first.

Reconnect a device

• For a paired Bluetooth device on which the automatic reconnection is enabled, this product reconnects with it once it is detected.
• For a paired Bluetooth device that does not support the automatic reconnection, reconnect it with this product manually.

Play audio via Bluetooth

Note

• If there is an incoming call on the connected mobile phone, music play pauses.

Buttons Functions

• Press and hold for 8 seconds to clear the Bluetooth pairing information.

Make a call
Button functions in Bluetooth mode.

Buttons Status Functions

• Incoming call: Press to answer an incoming call. Press and hold for more than 3 seconds to reject an incoming call.
• During a call: Press to end the current call. Press and hold for more than 3 seconds to transfer call between BT100 and the mobile phone.

Listen to an external device

You can also listen to an external audio device, for example, MP3 player, through BT100.

1. Connect an audio input cable with a 3.5 mm connector on both ends to
   • the AUX socket on this product, and
   • the headphone socket on the external device.
2. Switch the slider to the AUX position.
3. Play audio on the external device (refer to its user manual).

Product information

Note
Product information is subject to change without prior notice.

Amplifier

• Rated Output Power: 2W RMS
• Signal to Noise Ratio: >70dB
• Aux-in Link: 300 mV RMS, 10 kohm

Bluetooth

• Bluetooth specification: V3.0 +EDR
• Supported Profiles: HFPv1.5, AD2Pv1.2
• Advanced features: Echo and noise cancellations
• Range: 10 m/33 feet line of sight

General information

• DC power input: USB: 5V, 500mA;
• Built-in Li-Polymer battery: 3.7V 500mAH
• Battery working time: >8 hours
• Dimensions – Main Unit (L x W x H): 63 x 63 x 82 mm
• Weight – Main Unit: 0.18 kg

Troubleshooting

Warning

• Never remove the casing of this device.

To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www.philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.

General

• No power
• Recharge your speaker.
• No sound
• Adjust volume on the connected device.
• When you listen to audio through Bluetooth, make sure that no audio input cable is connected to the AUX socket.
• Make sure that your Bluetooth device is within the effective operational range.
• No response from the speaker
• Restart the speaker.

About Bluetooth device

• The audio quality is poor after connection with a Bluetooth-enabled device.
• The Bluetooth reception is poor. Move the device closer to this product or remove any obstacle between them.
• Cannot connect with the device.
• The Bluetooth function of the device is not enabled. Refer to the user manual of the device for how to enable the function.
• This product is already connected with another Bluetooth-enabled device.
• Disconnect that device and then try again.
• The paired device connects and disconnects constantly.
• The Bluetooth reception is poor. Move the device closer to this product or remove any obstacle between them.
• For some devices, Bluetooth connection may be deactivated automatically as a power-saving feature. This does not indicate any malfunction of this product.

Specifications are subject to change without notice

• 2014 © WOOX Innovations Limited. All rights reserved.Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations
• Limited under license from Koninklijke Philips N.V.
• BT100_00_UM_V2.0
• Register your product and get support at
• www.philips.com/support

References

• Philips Customer Service Support - Home | Philips
• Product registration | Philips

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>