FISHER PAYKEL AHP3RD36S Professional Round Flush Handle Kit for Integrated Cooldrawer User Guide
- June 12, 2024
- Fisher & Paykel
Table of Contents
FISHER PAYKEL AHP3RD36S Professional Round Flush Handle Kit for
Integrated Cooldrawer
Product Information
The Professional Round Flush Handle Kit for Integrated Cooldrawer is designed for use with the Fisher & Paykel RB36S25 model. It is a one-piece handle kit that provides a sleek and seamless look for your Cooldrawer.
Dimensions:
- Height: 1 – 1 7/16 inches
- Width: 28 5/8 inches
- Depth: 2 1/4 inches
- SKU: 25920
Note: The dimensions and specifications mentioned above are specific to this product and model. Please contact Fisher & Paykel’s Customer Care Centre to confirm if there have been any changes to the dimensions and specifications.
Fisher & Paykel Appliances Ltd © 2020
Product Usage Instructions
To install the Professional Round Flush Handle Kit for Integrated Cooldrawer, follow these steps:
- Ensure that the Cooldrawer is turned off and disconnected from the power supply.
- Remove any existing handle or trim from the Cooldrawer door.
- Align the holes on the handle kit with the pre-drilled holes on the Cooldrawer door.
- Insert the provided screws into the holes and tighten them securely using a screwdriver.
- If desired, pair the handle kit with a Fisher & Paykel stainless steel door panel or a cabinetry panel made by your cabinet maker.
- Once the handle kit is securely installed, reconnect the Cooldrawer to the power supply and turn it on.
If you encounter any difficulties during installation or have any questions about using the Professional Round Flush Handle Kit for Integrated Cooldrawer, please contact Fisher & Paykel’s Customer Support at T 1.888.936.7872 or visit their website at www.fisherpaykel.com.
Date: 22.06.2023
A PEACE OF MIND SALE – 24 Hours 7 Days a Week Customer Support
Professional Round Flush Handle Kit for Integrated Cooldrawer, 36″
Professional Round Flush Handle Kit for Integrated Cooldrawer, 1 Piece Compatible with RB36S25 Pair with a Fisher and Paykel stainless steel door panel or cabinetry panel made by your cabinet maker
DIMENSIONS
- Height: 1 – 1 7/16
- Width: 28 5/8
- Depth: 2 1/4
SKU: 25920
The product dimensions and specifications in this page apply to the specific product and model. Under our policy of continuous improvement, these dimensions and specifications may change at any time. You should therefore check with Fisher & Paykel’s Customer Care Centre to ensure this page correctly describes the model currently available. ? Fisher & Paykel Appliances Ltd 2020
A PEACE OF MIND SALE
- 24 Hours 7 Days a Week Customer Support
- T 1.888.936.7872 A PEACE OF MIND SALE
- 24 Hours 7 Days a Week Customer Support
- T 1.888.936.7872
- W www.fisherpaykel.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>