AVTRON SIGMA LT Hand-Held Control User Guide
- June 12, 2024
- AVTRON
Table of Contents
AVTRON SIGMA LT Hand-Held Control
KEY
LOAD SELECTION
| Decrease Load
---|---
| Increase Load
| Manual Load Entry
| OK
| Apply Load
| Reject Load
NAVIGATION
| Next Screen
---|---
| Down Screen
| Back Screen
| Network Overview
| Network Search
| Settings
| Status – Load Of
| Status – Load On
| Status – Warning
| Status – Error
| Single Load Bank Control
OTHER SYMBOLS
| Load Bank ID (Network view only)
---|---
| USB Found
Load Control
Data Logging
Load Banks in a Network
Status
Settings
Error
A message will appear if an error occurs. Press the screen to acknowledge. The load bank with the error will be removed from the network until it is cleared. For more information about errors view the load bank manual.
WARNING!
Read the load bank manual before use and take special note of all safety
warnings. Keep people well away. Close all doors. Ensure cables and earthing
are adequate. Ensure a 4m gap is between load banks to prevent hot air
recirculation. Risks include fire and burns from the hot air outlet and
electric shock.
Customers Support
Avtron Power Solutions
NJ Froment & Co Ltd, Cliffe Road, Easton-on-the-Hill
Stamford, PE9 3NP, UK
www.avtronpower.com
LBsalesint@ascopower.com • +44 (0) 1780
480033
©2022 Avtron Power Solutions. Publication 5052 • Rev. B
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>