Aetertek AT-919C 2-Dog 1100 Yard Ultra Range Remote USER MANUAL
- June 4, 2024
- Aetertek
Table of Contents
Aetertek AT-919C 2-Dog 1100 Yard Ultra Range Remote
INTRODUCTION
It is a remote training collar for dogs that has a range of up to 1100 yards (about 1000 meters); 10 levels of shock that can be adjusted to meet dog training requirements; 9 beep tone levels; flashlight and belt clip functionality; To grab your dog’s attention or to get him to quit barking or engaging in other unpleasant habits, use one powerful vibration that is gentle and effective; When a dog is left alone, the collar’s automatic anti-barking mechanism automatically reduces the dog’s barking; Rechargeable waterproof receiver; collar strap that may be adjusted from approximately 7.1″ to 24″ in length;
SPECIFICATION
- MATERIAL: Polyurethane
- BRAND: Aetertek
- ITEM DIMENSIONS LXWXH: 9.2 x 7.8 x 1.9 inches
- TARGET SPECIES: Dog
- RANGE: 1100 yards
- PRODUCT DIMENSIONS: 9.2 x 7.8 x 1.9 inches; 1.25 Pounds
- BATTERIES: 3 Lithium Polymer batteries
WHAT’S IN THE BOX
- Brand new and packed in a convenient carry-and-go storage bag;
- One AT-919C rechargeable remote controller/transmitter;
- Two heavy-duty waterproof collar receivers with built-in
- Two High quality adjustable PU dog collar straps;
- rechargeable battery;
- Wall charger;
- Shock Test bulb;
HOW TO RESET A PET TRAINER SHOCK COLLAR
To turn the collar on, press and hold the button on the collar until you hear a beep and see a green light flash. To reset the collar, press and hold the power button for 10 seconds. The collar goes off, and the light changes to red. Holding the button down continues.
HOW TO KNOW IF SHOCK COLLAR IS WORKING
While the collar is ticking or beeping, touch both of its points. There can be an issue with the receiver collar if you don’t feel a shock.
- This outcome informs you that the receiver is functional.
- The batteries work properly.
- Working is the wall-mounted transmitter.
- If the dog goes too far, it should be stunned.
HOW TO CHANGE LEVEL ON SHOCK COLLAR
To change the shock’s intensity, press and hold the LEVEL button while turning the remote control switch. Static Command: Shortly press the static button to send a single shock to the receiver.
HOW TO UNLOCK DOG SHOCK COLLAR
To unlock it, slide it downward. Pressing the vibration button for a brief period of time causes the receiver to vibrate once. Beep Command: Beep the receiver once by briefly pressing the beep button.
FAQs
Can a dog wear a shock collar continuously?
Regarding the safety considerations related to wear time, be aware that a dog CANNOT wear the e-collar always. As a result of the close fit necessary for optimum use, wearing the collar consistently will likely result in skin irritation and possible pressure sores.
Why won’t my dog’s shock collar work?
Ensure that the transmitter and collar batteries are both charged. A low battery charge may result in inconsistent operation. Ensure that the transmitter and collar are both turned on, and that the equipment is properly synced so that the collar is getting a signal.
What occurs if a shock collar is worn for too long?
In essence, this is a pressure sore that resembles a bed sore greatly. Too much pressure from the collar’s prongs compromises the blood supply to the underlying tissues. The tissue dies if this continues for a long enough time. The skin can then be progressively penetrated by the prongs.
How long does it take to shock collar-train a dog?
Nevertheless, I’m comfortable informing the majority of dog owners that after six to twelve months of training (providing you are being consistent), you should have good reliability and not feel forced to have your dog wear the e-collar in your typical day-to-day situations.
Shock collars may they malfunction?
Repeated shocks can make a dog anxious and confused, which can result in changes in heart and respiratory rates as well as gastrointestinal problems. Electronic collars may malfunction as well, either giving no shocks at all or giving shocks continuously.
How much time does a shock collar require to charge?
The transmitter and collar’s batteries should take 12 to 14 hours to fully charge. When not in use, take the charger out of the wall outlet.
Why isn’t my shock collar shocking?
The dog won’t feel anything at all if none of the contact points touches the dog’s skin. This occurs as a result of the dog’s collar being overly loose.
Will my dog’s shock collar harm him?
Your dog may suffer from shock collars. The electrostatic shock can result in dangerous increases in heart rate and painful burns to your dog’s skin. It can also create psychological anguish for your pet, including phobias and high levels of tension.
How high should my shock collar be set?
Set the Remote Transmitter’s Intensity Dial to Level 1 and push the Continuous Stimulation Button for 1 to 2 seconds with the Collar Receiver turned on and securely fastened on your dog. If Level 1 doesn’t elicit any response from your dog, move on to Level 2 and repeat the procedure.
Can a dog wearing an e-collar be left unattended?
When your dog is wearing a cone, it is not advised to leave him alone for extended periods of time. Try to bring your dog along with you if you can, or leave him with someone else you can trust, such a trusted family member, a dog sitter, or a neighbor, so that you can keep an eye on him.
How durable are shock collars?
The batteries in the collar and handheld last up to 60 hours, and it can control up to three collars.
Do dogs who wear shock collars become aggressive?
Aggression can result from the usage of choke collars, prong collars, and shock collars as positive punishment. This happens because the fear and discomfort a dog experiences when being shocked or choked is frequently connected to whatever the dog was paying attention to at the time rather than their own actions.
How long should a dog be restrained by a collar?
As your dog heals, the cone should be left on for about a week. All you need is typically seven to ten days, according to Ochoa. Particularly if you won’t be around to supervise the dog while she heals, the cone must be left on the entire time.
Are the rubber caps still on the shock collar?
We advise removing the silicone covers in order to apply shock correction because they can filter or block the shock.
Do shock collars cause dogs to urinate?
Some dogs may develop a phobia of people, things, or circumstances as a result of shock training. One of the pet owners we know installed a wireless fence, but after training with it, their dog wouldn’t go outside. Even worse, their dog started urinating inside the house.