Milwaukee MILDSHBC Double Shoulder Harness Instruction Manual
- June 12, 2024
- Milwaukee
Table of Contents
Milwaukee MILDSHBC Double Shoulder Harness Instruction Manual
Attaching the Harness
⚠ WARNING
Do not wear multiple harnesses simultaneously. When wearing a shoulder strap,
ensure that no other wearable interferes with the release and removal of the
strap.
When operating the tool, use the harness to reduce user fatigue and help in
maintaining control during use.
To wear the harness:
- Put both arms through the straps.
- Secure the buckle around your waist.
- Adjust the straps to tighten and fit comfortably.
- Adjust the waist strap as needed.
To install the harness:
- Remove the battery pack from the brush cutter.
- Insert the clip into the harness mount.
- Ensure the clip is secure around the harness mount.
- Adjust the harness mount location forward or back along the shaft until the tool is balanced appropriately.
To unclip the harness:
- Hold the tool by the shaft with your left hand.
- Grip the clip with your right hand and unclip by pushing the gate outwards and lifting the harness mount out of the clip.
WARRANTY – AUSTRALIA and NEW ZEALAND
Please refer to Australian and New Zealand warranty supplied with tool. This
warranty applies only to product sold by authorised dealers in Australia and
New Zealand.
SERVICE – AUSTRALIA and NEW ZEALAND
MILWAUKEE® prides itself in producing a premium quality product that is
Nothing But Heavy DutyTM. Your satisfaction with our products is very
important to us! If you encounter any problems with the operation of this
tool, please contact your authorised
MILWAUKEE® dealer.
For a list of MILWAUKEE® dealers, guarantee or service agents please contact
MILWAUKEE® Customer Service or visit our website. (Australia Toll Free
Telephone Number 1300 645 928) (New Zealand Toll Free Telephone Number 0800
645 928) or visit
milwaukeetool.com.au/milwaukeetool.co.nz.
Milwaukee Electric Tool Corporation 13135 West Lisbon Road, Brookfield,
Wisconsin U.S.A. 53005
Milwaukee Tool (Australia) 26 – 40 Nina Link, Dandenong South,
Victoria, 3175, Australia
Milwaukee Tool (New Zealand) 274 Church Street, Penrose, Auckland, 1061, New
Zealand
DESIGNED BY MILWAUKEE ELECTRIC TOOL CORP. PROFESSIONALLY MADE IN CHINA PRINTED IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>