ALTEC LANSING IMW1500 HydraShock Speaker Instructions

June 12, 2024
Altec Lansing

ALTEC - logo

REGISTER YOUR PRODUCT
To receive news, exclusive deals, OTA or fir’mware updates, warranty information and more please register your product at alteclansingsupport.com

In the Box

ALTEC LANSING IMW1500 HydraShock Speaker -

Charging

Place a Qi compatible device on the wireless charging pad to charge it

  • Make sure that your device is posilioned correctly on your charging pac.
  • Make sure that there are no alher objects on the charging pac.
  • Make sure to remove any phone covers before using the wireless charging.
  • When using Gi charging i the volume is >50% it will be automatically recuced to 50% to conserve battery

Speaker Controls Voice Assistant/ Reset

PRESS
+ Volume Up
Volume Down
Play/Pause
Answer & End Call
To activate Voice Assistant (Sid or Google Assistant) when connected to phone.
PRESS & HOLD (2 sec)
C!) ON /OFF
+ Next Track
Previous Track
Reject Incoming Call
Reset- Press & Hold
Disconnect Bluetooth: Press and hold for five seconds and the speaker will beep Reset All connections: Press and hold for ten seconds and the speaker will power off. All pairing information is reset.

Horizontal & Vertical Listening

The speaker will automatically switch modes based on it’s position (horizontal or vertical).

FOLLOW US ON

# myalteclansin
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful Interference, and (2) this device must accept any interference received. including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  •  Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Sakar International Inc.
195 Carter Drive
Edison, New Jersey 08817. USA
855-292-4087
www.alteclansing.com

IMPORTANT
PLEASE DO NOT RETURN TO STORE
If You’re Having Trouble, We’re Here to Help!

Call us 24/7 at 1-855-292-4087
E-mail us at support@alteciansing.com or visit us at alteclansing.com

A Closer Look

Powering On/Bluetooth Pairing

True Wireless Pairing

Turn on the first speaker and connect It with a Bluetooth compatible device.
Turn on the second speaker and press the  button on that speaker.
Press and hold the button for 2-3 seconds on the first speaker. The first ‘speaker will now connect to the second 50 they both play in sync. The Link Buttons.
will lluminate green.
To end TWS press & hold the power button on either specker.
There are two modes:
Mode 1: Dual Stereo, both play stereo for parties etc.
Mode 2: Wide Stereo, one plays left and the other right
Briefly press the bution to switch between the modes.

Light Change Mode

To toggle between the different light modes:

  1. Multicolor slow transition
  2. Single color pulse to music
  3.  Multi color pulse to music
  4. Single color slow fade
  5.  Single color
  6. Multicolor cycle changed
  7.  Multicolor fast changed with background color
  8. Multicolor slow fade
  9. Four color slow fade
  10.  Four color rotation with pulse to music
  11.  Four color rotation
  12. 0ff

Press & Hold the   button for -2 sec to change the Strobe light modes.

  • off  bPulse to music Blink off *

ALTEC - logo

| follow us @alteclansingofiicial
---|---
| follow us  @alteclansing
| follow us  @alteclansingoficial

12 Month Limited Warranty
All Altec Lansing products come with 12 month limited warranty from the date of its original purchase 24 Hour Customer Support
We love our customers, and we care about your experience with Altec Lansing. If you need assistance, please call us at 1.855.292.4087 or e-mail support@alteclansing.com www.alteclansing.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Altec Lansing User Manuals

Related Manuals