powerdale HOME A Nexxtender Solution Installation Guide
- June 12, 2024
- powerdale
Table of Contents
powerdale HOME A Nexxtender Solution Installation Guide
Safety instructions
Attention:
- The following safety instructions are intended to prevent hazardous situations and/or equipment damage. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
- Please read this document carefully before installing, using or interacting.
Keep this document for future reference. If you have any further questions, please contact your supplier.
Notice:
- Do not remove any labels from the device.
Caution:
- Before installation, check for exterior damage. If any part of the device is damaged, do not install it and contact your supplier.
- Never use the product with humid or wet hands or tools.
- Do not lean on, stack anything on top of, or hang anything from the holder or from the cables leading to the holder.
- Avoid too much traction on the cables.
- Do not step on, fold or knot the cables. Never use the cables as a rope.
- Never use the product or the cables near a heating source.
- Never use the product or the cables in the vicinity of flammable substances
Warning:
- Always turn off power before any manipulation, maintenance or repair of any kind, including any external measurement part. Turning off the differential or circuit breaker does not ensure a complete power cut-off.
- In case of danger or accident, ask a qualified person to turn off the power.
- The environment must only be used for charging your electric vehicle.
- This product must only be installed, repaired and maintained by qualified personnel. A qualified person is someone who is familiar with the installation, configuration, operation or maintenance of the equipment and the hazards involved. If commissioning and start-up of the charging device is necessary, the person must have knowledge of electric vehicles, including the ISO 61851-1 standard.
- The product is not intended for use by young children or any person not capable of assessing the risks. Do not allow children to play on or with this device.
- Do not apply force when reattaching the charging connector to the holder
Warnings Instructions
Required tools
What’s in the box
Cables overview
INSTALLATION
Step 1 – Pole base and cables
Step 2 – Pole installation
Step 3 – Device pole mounting
Step 4 – Ground continuity
Step 5 – Follow Home wall mounting installation – go to step 4
Mechanical specifications
Materiel: Stainless steel
Approximate Shipping Weight: 9.5 kg
Dimensions (HxWxD): 1460 x 26 x 20 cm
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>