powerdale MOBILE BLACK T1 Nexxtender Solution User Guide
- June 11, 2024
- powerdale
Table of Contents
MOBILE BLACK T1 Nexxtender Solution
User Guide
HOW TO START
HOW TO USE
TECHNICAL DATA
Charging specification
Vehicle Interface: Type 2 connector
Voltage and Current Rating: 230 V AC at 6 A or 10 A
Grid frequency: 50 Hz
Maximum Charging Power Output Single-phase: 2,3 kW
Power Supply Plug: Schuko® CEE 7/7
IEC Compliant Mode 2 per IEC 62752:2018
Operating conditions
Environment: Control box: IP64, Connector: IP54
Operating Humidity: Up to 95% non-condensing
Operating Temperature: -25 °C to + 50 °C
Standby Power: 3 W
Mechanical specification
External Casing: Polyamide
Cable Length Power supply plug end: 1,7 m – Car end: 4,00 m
Approximate Shipping Weight: 3 kg
Dimensions (HxWxD): 380 x 117 x 68 mm
Certifications
Safety: Residual Current Monitoring per IEC 62752:2018
(AC 30 mA DC 6 mA)
Communication: Sigfox readyTM
Product: declaration of conformity – CE
Extra features
Connectivity: Sigfox, BLE (Bluetooth Low Energy 5.0)
Memory: Data charges (charges datalogging)
Location: GPS (while charging)
Internal battery: For internal clock and SifFox messaging
Button: Touch button to select power output
Status: LED indicator
Management platform: Nexxtmove
Remote upgrade or a software upgrade can be done remotely via
Nexxtmove App.
For more information, please refer to the last contact page.
Attention:
- Please read this document carefully before using or interacting with the Mobile Black T1/T2.
- This document must be kept for future reference. If you have any further questions, we are there for you.
- Please make sure you have read the information and instructions of your electric vehicle.
Notice:
- A dedicated and adapted power line protected by a 30 mA residual-current device is recommended if the Mobile Black T1/T2 is used daily at the same location, in accordance with the local regulations.
- Do not remove any label from the device.
Caution:
- Always handle the cables via the plugs.
- Avoid too much traction on the cables.
- Do not step on, fold or knot the cables. Never use the cables as a rope.
- Do not drop the Mobile Black T1/T2 or place a heavy object on it.
- Do not place the charging cable near high temperature objects, dirt or water.
- Do not place it in an insulated container during a charging session due to risks of overheating.
Warning:
- Do not disassemble, repair or modify the device yourself. Refer to the manufacturer or supplier for assistance (see our contact info).
- Never user worn, damaged or dirty connectors and adaptors
- If the case is damaged, disconnect the power cable immediately and contact your supplier.
- Do not use the Mobile Black T1/T2 near a water source or during heavy rainfall.
- Do not use the device during a thunderstorm.
- Do not put fingers into the charging connector at any time.
- The Mobile Black T1/T2 must only be used for charging your electric vehicle.
- Do not use this device with any other extension cable or adaptor than the one supplied.
- The appliance is not intended for use by young children or any person not capable of assessing the risks. Do not allow children to play on or with this device.
- Do not use the fast charging speed on unknown sockets. Fast charging should only be used where you are sure about the electric protection level.
- The Mobile Black T1/T2 contains a Bluetooth Low Energy module which may not be brought into direct body contact with heart pacemakers out of safety reasons.
Waste electrical and electronic equipment directive.
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authority or retailer for recycling advice.
This document was printed on recycled paper
with recycled inks. https://powerdale.com/documentation
powerdale.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>