STERNGLAS Hamburg Automatic Bauhaus Watch User Manual
- June 5, 2024
- sternglas
Table of Contents
Manual
Hamburg Automatik
How to set up your timepiece
- Before you can start, you should wind up your timepiece first. To do this, wind the crown about twenty times in the direction of 12 o’clock.
- Now the most important thing: the correct time. To do this, pull the crown out to position 3 and bring the hands into the correct position. Then push the crown back into position 1.
- You can set the date by setting the crown to position 2. After setting the right day, push the crown back to position 1. Note: Your date changes at midday? This is because the movement does not “know” whether it is midday or midnight. Simply set your timepiece 12 hours forward.
You would rather have a different strap on your timepiece? No problem, changing it couldn‘t be easier.
- On the back of your strap, you will find a small metal pin. If you push it to the left, the strap can be easily released.
- Now you can attach a new strap to your timepiece. To do so, do the same thing again: push back the metal pin and then release it to let the new strap snap into place. Make sure you attach the short side to the upper side of the watch. Final check: is everything securely in place? Done.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>