Vicotee 11010308 Installing of External Antenna Kit Instruction Manual
- June 12, 2024
- Vicotee
Table of Contents
Vicotee 11010308 Installing of External Antenna Kit
Product Information
The External Antenna Kit (PN 11010308) is designed for use with the Aurora Platform. It is an angled IP54 antenna that comes with five parts:
- Antenna cable
- O-Ring / Rubber Seal
- Washer
- Nut
- Antenna
Figure 1:
Product Usage Instructions
- Start by removing the rear lid of the device. To do this, remove the rubber feet that cover the four screws. (Figure 2)
- Using a T8 torx driver, unscrew all four screws. (Figure2)
- Carefully lift the rear lid and batteries from the device. (Figure 2)
- Remove the old antenna carefully. (Figure 2)
- Install the new antenna kit using the middle hole of the Aurora box as shown in Figure 1.
- Reinsert the batteries, paying attention to the polarity.
- Close the rear lid and screw back all four screws. Finally, cover the screws with rubber feet.
Figure 2:
Caution: When lifting the rear lid, do not twist while lifting. Keep lifting straight up to avoid the lid hitting components inside the box.
Installing of External Antenna Kit (PN 11010308)
External antenna kit for Aurora (PN 11010308) is an an angled IP54 antenna. The kit comes with 5 parts:
- Antenna cable (1)
- O-Ring / Rubber Seal (2)
- Washer (3)
- Nut (4)
- Antenna (5)
Installing The Kit
- Start with removing the rear lid by removing rubber feet (1) that cover the four screws (2). (Figure 2)
- Unscrew all four screws (2) using T8 torx driver. (Figure 2)
- Carefully lift the rear lid and batteries (4) from the device. (Figure 2)
- Carefully remove the old antenna. (Figure 2)
- Installing the new antenna kit using middle hole of the Aurora box as shown in Figure 1.
- Reinsert the batteries, pay attention to the polarity of the batteries.
- Close the rear lid and screw back all four screws. Finally cover the screws with rubber feet.
Caution
When lifting the rear lid, do not twist while lifting. Keep lifting
straight up to avoid the lid hitting components inside the box.
Design by Adaptivethemes.com
References
Read User Manual Online (PDF format)
Loading......