PHILIPS BRL166 Beauty Lady Shaver User Manual

BRL166
BRL146
BRL136
BRL126

www.philips.com/parts-and-accessories

IMPORTANT SAFETY INSTRUCTIONS

When using an electric product, basic precautions should always be followed, including the following:
Read all instructions before using this product.

DANGER
To reduce the risk of electric shock:

• Do not reach for a corded product that has fallen into water. Unplug immediately from the power outlet.
• To charge the product, only use Philips IPX4 power source HQ87, available separately on www.philips.com/parts-and-accessories or by contacting Philips support at 1-800-243-7884 (US) or +1 (866) 800 9311 (Canada).
• Keep the USB cable and the USB power source (not provided) dry (Fig. 2).
• Do not place or store the product where it can fall or be pulled into a tub or sink. Do ot place or drop the product into water or other liquid.
• This product does not work while it is connected to the power outlet. Except when charging, always unplug this product from the power outlet.
• Remove USB power source from power outlet and product before cleaning.

WARNING
To reduce the risk of burns, fire, electric shock, or injury to persons:

•  This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety. Children should be supervised to ensure that they do not play with the product.
• Use this product only for its intended household use as described in this manual. Misuse can lead to hazards or serious injuries. Do not use attachments not recommended by Philips North America LLC. Accessories supplied may vary for different products.
• Never operate this product if it has a damaged USB power source, if it is not working properly, after it has been dropped or damaged, or after the product or the USB power source has been dropped into water. For assistance call 1-800-243-7884 (US) or +1 (866) 800 9311 (Canada).
•  Keep the USB cable and the USB power source away from heated surfaces.
•  Never drop or insert any object into any opening.
• Do not use the USB power source in or near a power outlet that contains an electric air freshener to prevent damage to the USB power source.
• Do not use this product outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
• Always check the shaving foil and trimmers before using the product. Do not use the product if the shaving foil or cutters are damaged, as injury may occur.
• Always attach the USB cable to the USB power source and the product first, then attach the USB power source to the power outlet. To disconnect, set all controls to ’off’ position. Then remove the USB power source from the power outlet.
•  Plug USB power source directly into power outlet. Do not use an extension cord.
• Unplug USB power source before plugging in or unplugging the product.
•  Only use original Philips accessories or consumables.
• Charge, use and store the product at a temperature between 50 °F / 10 °C and 95 °F / 35 °C.
• Keep product and batteries away from fire and do not expose them to direct sunlight or high temperatures.
•  If the product becomes abnormally hot or melly, changes color or if charging takes longer than usual, stop using and charging the product and contact Philips.
• Do not place products and their batteries in microwave ovens or on induction cookers.
• Do not open, modify, pierce, damage or dismantle the product or battery to prevent batteries from heating up or releasing toxic or hazardous substances. Do not short-circuit, overcharge or reverse charge batteries.
• If batteries are damaged or leaking, avoid contact with the skin or eyes. If this occurs, immediately rinse well with water and seek medical care.
• When you handle batteries, make sure that your hands, the product and the batteries are dry.
• To avoid accidental short-circuiting of batteries after removal, do not let battery terminals come into contact with metal objects (e.g. coins, hairpins, rings). Do not wrap batteries in aluminum foil. Tape battery terminals or put batteries in a plastic bag  before you discard them.

SAVE THESE INSTRUCTIONS

IMPORTANT INFORMATION

• This product is waterproof (Fig. 3). It is suitable for use in the bath or shower and for cleaning under the tap.
• Only use the product to shave or trim areas below the neck, except the inner labia (Fig. 4).
•  Do not use the product without comb on intimate areas other than the bikini line, as this could cause injury.
• Do not use the product on irritated or damaged skin, varicose veins, spots or moles (with hairs).
• To prevent damage or injury, keep the operating product away from scalp hair, eyebrows, eyelashes, clothes etc.
•  If you have been or begin taking hormone medication, or if you have recently been pregnant, a change in your hormone levels may influence the thickness, color or amount of hair growth. This is caused by hormonal changes, not by this method of hair removal.
• Because of hygiene, only one person should use the product.
• Turn the product off before removing or attaching attachments and before cleaning.
•  Clean the product after each use.
• Only use cold or lukewarm water to clean the product.
•  Never use compressed air, scouring pads, abrasive cleaning agents or aggressive liquids such as gasoline or acetone to clean the product.
• This product has no other user-serviceable parts.
  For assistance call 1-800-243-7884 (US only) or +1 (866) 800 9311 (Canada only).

Introduction

Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

Features (Fig. 1)

1. Trimming comb of shaving head

2.  Cutting unit of shaving head

3.  Shaving head

4.  Handle

5. On/off button

6.  Release button

7. Charge indicator

8.  Socket for small plug

9.  USB cable
   Note: To charge the product, only use Philips IPX4 power source HQ87, available separately on www.philips.com/parts-and- accessories or by contacting Philips support at 1-800-243-7884 (US) or +1 (866) 800 9311 (Canada).

10.  Cleaning brush

11.  Skin stretcher cap

12.  Soft glide cap

13. Trimming comb of trimming head

14. Trimming head

15.  Exfoliation glove

16.  Pouch

Note: The heads and accessories supplied vary for different model numbers. Consult the overview illustration for the heads and accessories supplied with your particular model.

Charging

Only charge the product in a dry environment (Fig. 5).
Charge the product fully before you use it for the first time.

1. Insert the small plug into the socket in the bottom of the product (Fig. 6).

2.  Insert the USB plug into the USB power source (not included).
   To charge the product, only use Philips IPX4 power source HQ87, available separately on www.philips.com/parts-and-accessories or by contacting Philips support at 1-800-243-7884 (US) or +1 (866) 800 9311 (Canada).

3. Insert the USB power source into the power outlet.
   The charge indicator on the handle lights up white (Fig. 9) to indicate that the product is charging.

4. After 10 hours or charging, the product has an operating time of 40 minutes.

5. After charging, remove the USB power source from the power outlet and pull the small plug out of the product.
   The charge indicator on the handle goes out.

Note: This product is waterproof (Fig. 3). It is suitable for use in the bath or shower and for cleaning under the tap. For safety reasons, the product can therefore only be used without cord.

Check your product before use

• Always check the shaving head and trimming head before use to make sure they are clean, in good condition and not damaged or worn (Fig. 10). A damaged shaving head or trimming head can cause skin irritation and reduced product performance.
• If a cutting unit is damaged, throw it away and start using a new one (Fig. 11). Order a new cutting unit from our website or contact Philips support at 1-800-243-7884 (US) or +1 (866) 800 9311 (Canada).

Tips for an optimal shaving experience

Before use

• Exfoliate your skin one day before shaving to remove dead skin cells around your hair follicles and to make it easier to remove hair.
•  Clean your skin before you start shaving.
•  If your skin is wet after cleaning, do not rub it dry but pat it dry.
•  Shave before going to bed so that your skin has time to recover overnight.
•  Do not keep the shaving head on one spot but keep moving it over the skin slowly.
• Avoid going over the same spot too many times.

After use

• Gently apply an alcohol-free soothing cream or lotion to your skin.
• Allow your skin some time to recover in between shaving sessions.
• When you have not used your shaver for a while, it is normal that some skin irritation occurs. Your skin may need to readjust to the shaving process.

Wet and dry use
This product is suitable for both wet and dry use.
For easy gliding and optimal skin comfort, either use the product on completely wet skin or on completely dry skin. Do not use it on moist skin.
Dry use
Use your product on dry skin for an optimal and most efficient shaving session. When the hairs are dry, they do not stick to the skin as much as during wet use. Make sure that your skin is clean and completely dry before you use the product.
Wet use
For a comfortable feeling and smooth movements, you can use the product on wet skin. Keep in mind that because wet hairs tend to stick to the skin, shaving performance may be better on dry skin. During wet use, rinse the shaving head regularly to remove hairs and to ensure that it continues to glide smoothly over your skin. Make sure your skin is completely wet with water (not just moist). Gently pat your skin dry after use.

Using the product
This product is waterproof (Fig. 3). It is suitable for use in the bath or shower and for cleaning under the tap. For safety reasons, the product can therefore only be used without cord.

Turning the product on and off

1. To turn on the product, press the on/off button once.
2. To turn off the product, press the on/off button once more.

Attaching and detaching heads

1.  To attach a head, press it onto the handle (‘click’) (Fig. 12).
2.  To detach a head, press the release button on the
   back of the handle (Fig. 13).

Attaching and detaching accessories
To attach an accessory onto the shaving head:

1. Align the indent in the accessory (cap or comb) with the notch on the back of the shaving head.
2.  Then simply snap the accessory onto the shaving head (‘click’) (Fig. 14).

To detach an accessory (cap or comb) from the shaving head:

1. Place a fingernail between the accessory and the shaving head to the left or right of the notch on the back.
2. Pull the back of the accessory upwards with a fingernail (Fig. 15).

Do not pull at the sides, teeth or other protruding parts of accessories to remove them.

To attach the trimming comb onto the trimming head:

1. Place the teeth of the comb over the trimming teeth.
2. Align the notches on the sides of the comb with the indents in the trimming head
3.  Press onto the back of the comb until the notches snap into the indents on both sides of the trimmer head.

To detach the trimming comb from the trimming head:

1. On one side of the comb, place a fingernail between the comb and the trimming head.
2. Pull with your nail until the comb comes off the trimming head (Fig. 16).
   Do not pull at the back or teeth of the comb to remove it.

Shaving and trimming

Note: When you use the product to trim hairs, use it dry for the best result.

1. Place the product on your skin in such a way that the cutting unit, attachment or accessory is in full contact with the skin (Fig. 17).
2.  When you use the product on sensitive areas, stretch the skin with your free hand. When you use the product on your underarms, raise your arm and put your hand on the back of your head to stretch the skin (Fig. 18).
3. Move the product slowly against the direction of hair growth (Fig. 17).

Note: If you move the product over your skin too fast, you may not obtain a smooth result.
Shaving head
You can use the shaving head to shave your legs, arms, underarms and bikini area. Do not use the shaving head on your face.
To shave your intimate area, only use the shaving head with the shaving head comb attached (Fig. 19) and only use it on the inside and outside of the outer labia (Fig. 4).
Trimming comb of shaving head
You can attach the trimming comb onto the shaving head (Fig. 14) to trim hairs to a length of 0.12 inch/3 mm.
Skin stretcher cap
You can use the skin stretcher cap to stretch the skin when you shave large areas like the legs.
You can attach the skin stretcher cap onto the shaving head (Fig. 20) to make the hairs stand upright during shaving. This makes it easier to remove them.
Soft glide cap
You can use the soft glide cap for small curved areas like the underarms and knee pit.
You can attach the soft glide cap onto the shaving head to cover the back trimmer of the shaving head for extra safety in curvy areas.
The smooth material makes it glide effortlessly over your skin.
Make sure that you attach the soft glide cap in such a way that the back trimmer of the shaving head is covered (Fig. 21).
Trimming head
You can use the trimming head to trim hard-to-reach areas in the bikini area and to for styling and shaping in the bikini area.
To trim your intimate area, only use the trimming head with the comb attached (Fig. 22) and only use it on the inside and outside of the outer labia (Fig. 4).
Place the trimming head flat onto the skin to trim (Fig. 23). Place the trimming head perpendicularly onto the skin (Fig. 24) to create different hair styles in the bikini area (Fig. 25).
Trimming comb of trimming head
You can attach the trimming comb onto the trimming head to trim hairs in the bikini area to a length of 0.12 inch/3mm.

Cleaning

1. Make sure that the product is disconnected from the USB cable.
2. Turn off the product.
3. Use the cleaning brush to brush away any hairs that have collected under the trimmers of the shaving head.
4. Pull the cutting unit out of the shaving head (Fig. 26).
5. Clean all parts of the shaving head with the cleaning brush, except the foil.
6. Rinse the cutting unit, shaving head and accessories under the tap. Shake them firmly to remove water drops.
7. Let all parts dry completely.
8.  Place the cutting unit back into the shaving head (‘click’).
9. To protect cutting units, foils and trimmer teeth, attach combs to the heads when you store the product.
   Note: Lubricate trimmer teeth and foils with a drop  of sewing machine oil every six months for optimal performance.

Storage

1.  To prevent damage, put the trimming combs on the shaving head and on the trimming head when you store them (Fig. 14).
2. Store the product, its heads and accessories in the pouch (if supplied) or in another safe, dry place.

Replacement
For optimal cutting and gliding performance, we advise you to replace the cutting unit of the shaving head every 12 months or when it no longer provides the shaving or trimming results you expect.
Depending on your usage behavior, the exact lifetime of the cutting unit may vary. Similar to a manual blade, the foil of the cutting unit becomes blunt over time. This may result in reduced shaving performance and an increased hair pulling sensation during shaving and trimming. You may wish to replace the cutting unit sooner or later than indicated, depending on how satisfied you are with the performance of the foil.
If the foil is damaged, stop using the shaving head and replace the cutting unit immediately.
Always replace the cutting unit with one of the original type.
Note: The availability of accessories may differ by country.

Assistance

For assistance, visit our website: www.philips.com/support or call toll free 1-800-2437884 (in US only) or 1-866-800-9311 (in Canada only).

Disposal

•  This product contains a rechargeable NiMH battery which must be disposed of properly.
• Contact your local town or city officials for battery disposal information. In the US, you can also call 1-800-822-8837 or visit www.call2recycle.org for battery drop-off locations (Fig. 27). In Canada, you can also call 1-888-224-9764 or visit www.call2recycle.ca for battery drop-off locations.
•  For assistance, visit our website www.philips.com/support or call 1-800-243-7884 toll free.
• Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. For recycling information, please contact your local waste management facilities or visit www.recycle.philips.com.

Full Two-Year Warranty
Philips North America LLC (USA) and Philips Electronics Ltd (Canada) warrant this new product against defects in materials or workmanship for a period of two years from the date of purchase, and agree to repair or replace any defective product without charge.
Cutting units and combs are not covered by the terms of this warranty because they are subject to wear and tear.
IMPORTANT: This warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care, the affixing of any attachment not provided with the product or loss of parts or subjecting the product to any but the specified voltage.
NO RESPONSIBILITY IS ASSUMED FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.
In order to obtain warranty service, simply go to www.philips.com/support for assistance. It is suggested that for your protection you return shipments of product by insured mail, insurance prepaid. Damage occurring during shipment is not covered by this warranty. NOTE: No other warranty, written or oral, is authorized by Philips North America LLC and Philips Electronics Ltd (Canada). This warranty gives you specific legal rights, and you may also have other rights which vary from state to state, province to province or country to country. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion and limitations may not apply to you.
Read enclosed instructions carefully.
45-Day Money-Back Guarantee
If you are not fully satisfied with your product send the product back and we’ll refund you the full purchase price.
The product must be shipped prepaid by insured mail, insurance prepaid, have the original sales receipt, indicating purchase price and date of purchase, and the money-back guarantee return authorization form enclosed.
We cannot be responsible for lost mail.
The product must be postmarked no later than 45 days after the date of purchase. Philips reserves the right to verify the purchase price of the product and limit refunds not to exceed suggested retail price.
To obtain the money-back guarantee service, please go to www.PhilipsMoneyBack.com and follow the simple 3-step process.
Delivery of refund check will occur 6–8 weeks after receipt of returned product.

In US manufactured for Philips Personal Health, A division of Philips North America LLC, P.O. Box 10313, Stamford, CT 06904 In Canada imported by: Philips Electronics Ltd, 1875 Buckhorn Gate, 5th Floor, Mississauga, Ontario, L4W 5P1
This symbol on the product’s nameplate means it is listed by Underwriters’ Laboratories, Inc.
PHILIPS and Philips shield are registered trademarks of Koninklijke Philips N.V / PHILIPS et le blason Philips sont des marques deposees de Koninklijke Philips N.V. / PHILIPS y Philips Shield son marcas registradas de Koninklijke Philips N.V. ©2022 Philips North America LLC. All rights reserved / Tout droits reserves / Todos los derechos reservados. 3000.078.4770.1 (03/23/2022)

References

• Philips Consumer Product Return and Refunds - Cookies Required
• Call2Recycle | Leading the Charge For Battery Recycling
• Philips Customer Service Support - Home | Philips
• Product registration | Philips
• Philips Consumer Product Return and Refunds - Cookies Required

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>