REDRAGON M914 Nix Wireless RGB Gaming Mouse User Guide

REDRAGON M914 Nix Wireless RGB Gaming Mouse

Dear user

Thank you for choosing our product. To protect your rights and for better customer service, we ask that you note our warranty rules.

1. Within guaranty period, repair is guaranteedfor failure due to electrical circuit problems. Other damages, such as disassembly, hard impacts, submersion into water, plugging into improper current or voltage, and damage caused by natural disasters such as fire, flood, or earthquake are not included.
2. Consumable parts (such as foot pad) and spare parts replacement are not included in our warranty.

OS Support
Windows XP/Vlsta/Win 7/Win B/Win 10/Wln 11

Basic Operation

How to Connect the Mouse with a Computer Wired Connection

1. Take out the USB to USB C cable in the package and connect the mouse with your computer.
2. Slide the power switch on the bottom of the mouse at any mode(2.4G/OFF/BT), The mouse Is under recharging whatever the mouse Is at 2.4G/OFF/BT .
3. The computer will recognize and configure the mouse automatically at wired mode.
4. The mouse will be ready for use when the configuration is finished.

2.46 wireless pairing

1. Slide the power switch on bottom of the mouse to 2.4G.
2. Take out the USB receiver in the package and plug it into any available USB port on your computer,please note that the USB receiver can be storage on the bottom of mouse.
3. Press any button on mouse, the computer will recognize and configure the mouse automatically.
4. The 2.4G indicator is under scroll wheel, it is light on in Green while pairing, the light turns off after paired.

Bluatooth pairing

1. Slide the power switch on bottom of t he mouse to BT.
2. Press and hold the pairing button at mouse bottom for 3 seconds, switch on PC or tablet bluetooth ,search the mouse as BT5. 1 mouse, press it for pairing.
3. The bluetooth indicator is under the scroll wheel, it is twinkle in blue while pairing, the indicator turn off after paired.

Auto sleep and power save function

The gaming mouse will be sleep mode if it is out of work in 8 minutes, please move the mouse or press any key to wake it up.

How to Recharge the Battery

1. The scroll wheel light will flash in red when battery is low.you need to recharge the mouse now.
2. Take out the USB to USB C cable and connect the mouse and any USB power output port, While the battery is under recharging, the scroll wheel lights up and flash firstly in yellow, then in yellow by 30%-90% charged and finally lights steady as DPI indicator when the battery is fully charged.
3. It may take about four hours for the mouse to be fully recharged.
4. Note: Slide the power switch on the bottom of the mouse to OFF for long term storage.
   CAUTION : DO NOT CHARGE THE MOUSE BY WALL PLUG, INPUT VOLTAGE MAX 7V.

Button Instructions

1. Left mouse button.
2. Right mouse button.
3. Scroll wheel (clicked as middle mouse button).
4. Fire button(it is not available under BT mode}.
5. Side key, defaulted function: Left Forward key on the keyboard.
6. Side key, defaulted function: Left Backward key on the keyboard.
7. DPI+ button
8. DPI- button
9. Light mode switch key
10. Power button: 2AG/OFF/BT button.
11. BT pair button.
12. Teflon foot pads; Large wear-resistant materials let the mouse move more smoothly.

DPI adjustment and indication

• DPI Indicator : Behind the Scroll Wheel (color be changed by software)
• Red —— Gear I (500 DPI)
• Blue —- Gear 2 (1000 DPI) Defaulted
• Green — Gear 3 (20CIO DPI)
• Purple—Gear 4 (3000 DPI)
• Yellow —-Gear 5 (5000 DPI)

Software Instructions

User can adjust the following settings through the software after downloading and installing it.

1. Adjust the DPI of the mouse at the user’s discretion.
2. Multiple function for mouse keys: report rate, fire key, Macro, DPI, multi-media,
3. Mouse LOD height level:1 mm/2mm.
4. Report rate (Not available on BT mode) options: 125HZ/250HZ/500HZ/1000HZ.
5. Backlight patterns: ON/Breath/Flowing/Neon/Marquee/Mixed color breath/OFF.
6. Backllght brightness and speed.

FAQ

1. If the mouse Is not responding, please check whether the mouse Is plugged correctly in the corresponding computers U5B port, or try another USB ports.
2. If the mouse is moving slowly.jumping or with delay, please try another surface. Dark, dirty, un-flat, bright surfaces may affect the performance of mouse. Mouse pad strongly recommended.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receMng antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment Into an outlet on a cl re ult different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/lV technician for help

This device complies with part 15 of the FCC rules, Operation is subject to the following two conditions [1 )this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

BATTERY SAFET Y GUIDELINES

• DO NOT replace the battery with a different model,
• DO NOT use this product If the battery shows signs of damage Including, but not limited to tearing, deformation, leakage, or the smell of electrolytic material.
• DO NOT touch the battery fl material is leaking and seek immediate medical attention if any material comes into contact with your skin or eyes.
• DO NOT expose the battery to liquid, heat sources, electricity (outside of the product itself), or other non-standard operating condition.
• DO NOT remove the battery except for proper disposal and recycling as required by local laws and regulations..
• DO NOT impact, bend, alter, dissemble, or otherwise damage the battery as the contents are volatile, hazardous, and can be harmful.

CAUTION

• Failing to follow all safety guidelines may result product damage, explosion, fire, and/or electric shock
• This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s), Operation is subject to the following two conditions: (1 ) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Please scan here to download user manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>