Kaiser WK 2000 Empire Electric Kettle User Manual

Kaiser WK 2000 Empire Electric Kettle

Product Information

• Product Name: WK 2000 Electric Kettle
• Product Type: Electric Kettle
• Manufacturer: Kaiser

Product Features:

• High-quality electric kettle
• Complies with world comprehensive standards
• Modern appearance designed by European designers
• Main demands of security, hygiene, and environment protection met
• Comes with certificates DIN ISO 9001, ISO 1400
• Complies with Gosstandart of Russia and CIS standards

Product Usage Instructions

Before using the WK 2000 Electric Kettle, please read the following instructions thoroughly:

Installation Instructions

•  Connect the kettle to the power network.
• Ensure that the appliance is connected directly to mains terminals.
• Fit a switch with a minimum aperture of 3 mm between the contacts.
• The switch should have sufficient capacity for the power specified on the appliance’s data plate and comply with applicable regulations.
• The switch must not break the yellow-green earth wire.
• Make sure the socket or switch is easily reachable with the oven fully installed.

Brief Description

Refer to the location drawing provided in the manual for a visual representation of the WK 2000 Electric Kettle.

Operating Conditions

Before first use:
Follow the installation instructions mentioned above.

Usage:

• Fill the kettle with water according to your requirements.
• Place the kettle on the power base.
• Turn on the kettle using the power switch.
• Wait for the water to boil.
• Once the water has boiled, turn off the kettle and remove it from the power base.
• Pour the hot water carefully, taking precautions to avoid burns or spills.

Operational Safety

Follow these safety guidelines while operating the WK 2000 Electric Kettle:

• Do not touch the kettle’s hot surfaces during or after use.
• Ensure the kettle is placed on a stable and heat-resistant surface.
• Do not immerse the kettle or power base in water.
• Keep the kettle away from children and pets.

Care and Maintenance

Cleaning:

1. Before cleaning, unplug the kettle from the power supply.
2. Wipe the exterior of the kettle with a damp cloth.
3. Clean the interior of the kettle with a mild detergent and rinse thoroughly.

Descaling:

1. Regularly descale the kettle to remove mineral deposits.
2. Follow the descaling instructions provided in the manual.

What to Do If?

If you encounter any issues or problems with the WK 2000
Electric Kettle, refer to the troubleshooting section in the manual
for assistance.

Respect for the Environment

The WK 2000 Electric Kettle is designed with respect for the environment. Follow the guidelines mentioned in the manual for proper disposal and recycling of the product.

DEAR CUSTOMERS,
thank you for purchasing this Kaiser product.
We are convinced that you have made a right choice. This product which satisfies the high quality demands and corresponds to world comprehensive standards realizes your electric kettle, and his modern appearance which has been developed by the best European designers will decorate your kitchen splendidly.
We ask you to read the operating instructions before usage thoroughly. The consideration of recommendations protects you from possible inconveniences which can appear as a result of the wrong use of the kettle, and allows you to reduce the consumption of electric energy. If the use corresponds to the present operating instructions, the kettle will bring you a lot of pleasure for a long time.
Our electric kettles correspond to the main demands of the security, hygiene and environment protection, according to the directives of the EU which is confirmed with certificates DIN ISO 9001, ISO 1400, according to the norms counting within the frames of the EU, they also correspond to the Gosstandart of Russia, standards of the CIS, which is confirmed with the corresponding certificates.
With the thoughts of a constant improvement of the quality of our electric kettles the changes in design and equipment which lead only to positive changes of the technical qualities are reserved by the manufacturer.
We wish you an effective use of the electric kettle of our firm.
Yours faithfully
OLAN
Berlin Germany
We Inform you that our devices which are the object of the present operating instructions are pre certain exclusively for the domestic use.

INSTALLATION INSTRUCTIONS

CONNECTING TO THE POWER NETWORK
Before connecting the oven to the mains power supply, make sure that:

• The supply voltage corresponds to the specifications on the plate on the bottom of the device.
• The power network has an efficient ground connection complying with all applicable laws and regulations.

The according to the rules installed socket is a legal requirement. The power cable should never reach a temperature 50 °C above ambient temperature at any point along its length.
If the appliance is to be connected directly to mains terminals, fit a switch with minimum aperture of 3 mm between the contacts. Make sure that the switch is of sufficient capacity for the power specified on the appliance’s data plate, and compliant with applicable regulations. The switch must not break the yellow-green earth wire. The socket or switch must be easily reachable with the oven fully installed.
After connecting the device to the power supply network (in accordance with the requirements defined above) it is necessary to check the if it works correctly.

Attention! The manufacturer declines all responsibility for damage or injury if the above instructions and normal safety precautions are not respected.

BRIEF DESCRIPTION

The electric kettle is intended only for boiling of water.
Milk or drinks from instant powders scorching at heating or boiling, it can damage an electric kettle.
The electric kettle can be used only together with base.

LOCATION DRAWING
Arrangement of the functional elements:

1. Kettle body.
2. Handle.
3. Switch with control light.
4. Lid.
5.  Spout cup operator.
6. Base.

OPERATING CONDITIONS

BEFORE FIRST USE
If you use kettle first time, it is recommended to fill the kettle with water up to max indicator level 2.0 l and boil the water, later to repeat the procedure.
By the first boiling it is recommended to add a tablespoon of vinegar.

USAGE
Remove the kettle from a base, open a lid, fill the water using the water level indicator and close the lid.
Put the filled kettle on the base, press switch button, indicator light lights up.
After the water has boiled, the kettle switches off and the indicator light goes down. If you take off the kettle from the base, it can switch off automatically and the indicator light also goes down.
The kettle can be switched off manually in any time, by pressing switch button.
It is not recommended to open the kettle lid at once after switch off. There is a danger to be scalded by hot steam.
After each boil, let the kettle cool for around 1 minute, before you refill the kettle with water again.
It can form condensation naturally on the base. It is quite normal and does not mean that the kettle is out of service or leaking.

Water absence protection
if you switch on the empty kettle, the water absence protection will be activated and switches off the kettle automatically.

OPERATIONAL SAFETY

Attention! There is a danger of electric shock!

Read carefully the user manual before use.
Before plug in, be sure, that the voltage, pointed on the lable, corresponds to the voltage at you house.
Do not touch hot surfaces of the device, take only the handle.
Switch off the device, if you do not use it.
Do not let an electric cord to overhang from a table, to be damaged or to touch hot surfaces.
The device is to use on flat fixed surfaces.
Do not stand the device near other heating devices.
To avoid an electrical shock, do not put the device in to the water or other fluid.
Do not leave children near switched on device.
The device is only for home use.

CARE AND MAINTENANCE

Regular cleaning and descaling provide normal device functionality and extend working time.

CLEANING
Unplug the device before cleaning.
Do not use a steam cleaner.
Clean outer surface of the kettle with wet fabric.
Use soft cleansers for pollution removal. Do not use metal brushes and abrasive materials.
Do not put the kettle and base in to the water during the cleaning.
After cleaning, wash the kettle with a clear water.

Attention! Do not wash a kettle and base in dishwasher !

DESCALING
The scale inside the kettle, effects on taste quality of water and breaks a heat exchange between heating elements and water, that extends the time of water heating and brings to overheating of heating elements and device collapse.
Descaling is recommended once a month.

For descaling:

• Fill in the kettle with water up to max level indicator and boil it
• Add 1 cup of food vinegar and leave for a few hours
• After it wash the kettle in the clear water.

In addition you can use special descaler, following user manual at its package.
It is strongly not recommended to boil the descaler!

Attention! Never descale with hard items. There is danger to damage gasket.

WHAT TO DO IF?
During a use of an electric kettle can appear sometimes some problems and defects. Some of the problems can be fixed by a consumer himself using the below pointed recommendations:

Cleaning)
Problems| Possible reasons| Solutions
Electric kettle| Overheat system| Switch off the electric
does not heat| has switched on| kettle and remove it from a base and let it
 |  | cool for some time
Control lamp| Overheat system| Switch off the electric
does not light| has switched on| kettle, remove it from the base and let it be
 |  | cool for some time
Electric kettle| A steam has| Clean the kettle from
switches off| formed in the| the steam using our
earlier as water has boiled.| electric kettle| recommendations (. Part Steam Cleaning)

ALTERNATE INSPECTION
Besides the current maintenance the user is duty-bound to the following actions:

• Alternate check and maintenance of cooker hood elements and assemblies,
• Abolishment of noticed errors.

Note! All installing and maintenance actions mentioned on the top as well as reparations are to be accomplished by a authorized installer.
Important! The user is responsible for the irreproachable condition and professional use of the unit. If the customer service is called because of an operating mistake, the visit is liable to pay costs in the warranty, too.
Damages, which are caused through not following this instruction, are not approved.

RESPECT FOR THE ENVIRONMENT

The documentation provided with this oven has been printed on chlorine free bleached paper or recycled paper to show respect for the environment.
The packaging has also been designed to avoid environmental impact. Packaging material is ecological and can be re-used or recycled.
By recycling the packaging, you will help save raw materials as well as reducing the bulk of domestic and industrial waste.

Disposing of the packaging
Please dispose of the packaging that came with your appliance in an environmentally friendly way. Recycling in this way saves on resources and cuts down on waste.

Disposing of old appliances
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

WARRANTY CONDITIONS FOR HOME APPLIANCES

1.  The warranty for a broken part is valid for the full period of 24 months from the day of purchase.
2.  The manufacturer only covers the servicing in the event of a manufacturer fault, such as but not limited to: inappropriate design, installation by technician, defective materials.
3.  This warranty applies only to products used for the following purposes: non-commercial, personal, family, residential, or household. For anything outside of these purposes, the warranty is only valid for 4 months from the date of purchase of the products.
4. Repairs that qualify under this warranty guarantee are completely free including the cost of labour, and materials, transportation is determined by the relevant Kaiser servicing centre.
5.  Any questions or queries on the quality of the product will be assessed only after our servicing company checks the product. Any conclusions will only be reached based on the outcome of a servicing report.
6.  The product will only be exchanged within the warranty period in the situation that the servicing expert concludes that the product cannot be repaired or if the same product requires parts changed three times in total within the warranty period.
7.  In case of unnecessary or unjustified demands for customer service, we charge for our service the usual time consumption and transportation fees. Before you contact our customer service, please check whether it‘s a defect or error of a product or or mistake of maintenance. Please take the time to communicate with the relevant Kaiser service center.
8.  Installation of the device should only be carried out by qualified professional persons. The customer is required to provide appropriate justification. Otherwise there is no entitlement to the grant of a guarantee.
9.  Only the distributor selling the products has the right to exchange the defected product for a new one.. Liability under this warranty is limited to, unless otherwise specified by law is all referred to these above obligations.

WARRANTY NOT VALID WHEN:

1. In the event of our products being damaged or experiencing some kind of fault from transport damage, due to incorrect installation by other than trained Kaiser technician or taking improper care of the products, connecting to the wrong power supply, the use of non-recommended cleaning agents and detergents. Any failure to comply with the instructions for operational use or if the product has been repaired or modified or installed by the customer and changed or removed the serial number will not qualify for the warranty conditions.
2. Products being serviced by an unauthorized servicing company will not be valid for warranty.
3. Product failures caused by reasons independent of the manufacturer, such as fluctuations in the power supply, external events such as nature or natural disasters, fire, insects or domestic and wild animals will not comply with the warranty conditions.
4. If the glass or the ceramic glass on a product is broken or defected after installation, the customer will be held liable.
5. Any damage scratches, cracks, and external mechanical faults caused during the operation by the customer.
6.  The damage of certain parts being caused by normal wear and tear such as (lamps, filters, etc.).
7. Other external factors causing damage such as adjusting the products and cleaning.
8.  Any other damage caused by the fault of the user and which is not linked to faults caused by the manufacturer will not comply with the warranty agreement.

The unearthed devices are potentially dangerous.
The manufacturer accepts no liability for damages which have caused by improper use, the incorrect installation, operation, application or maintenance.

WARRANTY CARD

(Nr. indicates the number of the unit, see the back cover of this manual)
This warranty does not limit statutory rights of consumers
Congratulations on the purchase of household appliances of excellent quality!
Please refer to the warranty card and make sure it has been properly filled in and had a shop stamp. In the absence of the stamp and the date of purchase, warranty period commences from the date of manufacturing of the product. Carefully check the appearance of the product, all claims about the product appearance must be notified to the seller at the time of purchasing. Keep the warranty certificate and the receipt. In the event of the product components incomplete/ missing and or requirement for their replacement, please contact your dealer.

For the installation, connection and all matters relating to the maintenance, contact authorized service centres. Details of authorized service and repair service centres are attached in a separate list.

We reserve the right to make changes in design or manufacturing technology. Those changes do not entail obligation to update or improve the previously released products

Declaration of Conformity

Manufacturer:

OLAN-
277 13437 Berlin
Germany

This is to confirm that all kettles

Type:

model number

DIN EN 60335-1: 2012+A11: 2014

DIN EN 60335-2-15: 2002+A1: 2005+A2:2008+A11:2012
DIN EN 62233: 2008
DIN EN 55014-1: 2006+A1: 2009+A2: 2011
DIN EN 55014-2: 20015
DIN EN 61000-3-2: 2014
DIN EN 61000-3-3: 2013

Berlin, 12.11.2021
Department Manager

The manufacturer declines all responsibility for possible mistakes and typing errors and reserves the right to make in design and construction of our own products those changes which do not touch negative influence upon the qualities and properties without a preliminary notification.

References

• Europa.com is For Sale | BrandBucket
• Бытовая техника Kaiser - Официальное представительство, интернет-магазин
• ELESCO EUROPA GmbH – Reparatur – Service – Installation – Wartung – Ersatzteile
• ESECO GmbH | Das Netzwerk für maßgeschneiderte Servicelösungen in Österreich
• Kaiser offizielle Webseite – Kaiser offizielle Webseite
• SFG | Société française de garantie
• Universal Service Provider

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>