eufy E7250 Dog Training Collar Device User Guide

eufy E7250 Dog Training Collar Device

IMPORTANT SAFETY INFORMATION

• Your dog must be at least 6 months old to use this product.
• Never use this product to reduce or stop aggressive behavior. Consult a professional trainer instead.
• Wearing a collar that is too tight or for a long time (more than 12 hours a day) might damage your dog’s skin

PRODUCT OVERVIEW

1. LED Indicator

2. Power Button:

   • Press and hold for 1 second to power on.
   • Press and hold for 3 seconds to power off.

3. Connectors

4. Charging Port (with cover)

5. Display: Shows dog channel, shock level, and battery level.

6. Beep Button

7. Vibration Button

8. Shock Button

9. Mode Switch
   Beep, vibrate, and shock
   Beep and vibrate
   Power off

10. Shock Level + / –

11. Dog Channel Switch

CHARGING

Charge the collar for 4 hours before first use:

Charge the remote controller:

WEARING COLLAR FOR YOUR DOG

Make sure both connectors properly contact the neck. Add the provided connector extensions if necessary

To verify the shock works properly, use the provided shock testing tool. Press the Shock button and check the light. It will get brighter as you increase the shock level and darker as you decrease the shock level.

TRAINING YOUR DOG

*The vibration will stop automatically if you hold the button for more than 10 seconds.

| | The collar delivers an electric shock to the dog, ranging from level 1 to 16.

*The electric shock will stop automatically if you hold the button for more than 10 seconds.

Find an appropriate shock level.

• Always start with the lowest level.
• The appropriate shock level can be found when your dog responds to the shock with a mild reaction, such as tensing the muscles in the neck.
• The shock level also varies depending on the trainings you deliver. For a training that requires high concentrations, your dog might need a shock of higher level.

NOTICE

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help.

RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.
The following importer is the responsible party.
Company Name: POWER MOBILE LIFE, LLC
Address: 10900 NE 8TH ST, STE 501, BELLEVUE, WA 98004
Telephone: 1-800-988-7973

IC Statement

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. The device can be used in portable exposure condition without restriction. This equipment can be used in portable exposure condition without restriction.

CUSTOMER SERVICE

Warranty
12-month limited warranty

Call Us

United States
+1 (800) 988 7973 Mon-Fri 9AM-5PM (PT)

United Kingdom
+44 (0) 1604 936 200 Mon-Fri 6AM-11AM (GMT)

Germany
+49 (0) 69 9579 7960 Mon-Fri 6:00-11:00

Email Us
Customer Support: support@eufylife.com
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

@EufyOfficial
@EufyOfficial
@EufyOfficial

Anker Innovations Limited. All rights reserved. eufy PET and eufy PET Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>