Apps Colorful Ears App for Ear Endoscope User Guide
- June 12, 2024
- APPs
Table of Contents
Apps Colorful Ears App for Ear Endoscope
Download the App
ios
Android（Please search earpick in Google Store or scan QR code）
Turn On The Device
Press and hold the power button to turn on the device
Connect Products WIFI
Open the App and click
Connect your mobile phone to the produce WiFi and select “earpick_xxxx”.
After returning to the APP, click the button below to use it
Problem and Solution
| Problem | solution |
|---|---|
| After connecting the ear scoop WiFi, the APP will | Turn off the 4G/5G |
network of the mobile phone, fully charge the ear
not draw a picture or display a black screen| spoon, again restart it and
connect it
The camera light does not light up after starting| Restart the ear scoop after
charging
Unable to scoop WiFi search ear| Please confirm whether the ear scoop is
powered on and refresh the mobile phone WiFi list
The indicator does not light up when charging| Please change the charging line
Display network refused to join when connecting to WiFi| Restart the ear spoon
and connect it again. Only one mobile phone is allowed to connect to the ear
spoon WiFi
When the iOS mobile phone enters the APP, it will pop up to allow “Color Ear”
to use wireless data?| Please select “Wireless cellular network” LAN and
The Android mobile phone pop-up box prompts that the current WLAN cannot
access the Internet normally. Do you want to disconnect/switch
the data network auxiliary connection?| Please do not switch the ear scoop
WiFi and select “Keep connected”
Apple does not display images after connecting to the device hotspot| Please
open “Local Network” in Settings – “Visual Earpick”
If you cannot solve the problem according to the above operations, please
contact us with online customer service to provide you with further practical
solutions
Product Parameters
| Product name | Smart visual ear spoon |
|---|---|
| Network standards | IEEE 802.11b/g/n |
| Operating frequency | 2.4Ghz |
| Image transfer rate | 30fps |
| Image sensor | CMOS |
| Operating ambient temperature | -10~50℃ |
| Input power | DC 5V 0.4A |
| Operating voltage | 3.7V-4.2V |
| Operating power | 0.75W |
| Optimal focal length | 0.4-2cm |
| gyroscope | Gimbal gyroscope |
Precautions
- When using, the temperature of the product will rise slightly (up to 38°) and have no effect on the human body
- When cleaning the lens, it is recommended to wipe carefully with a cotton swab
- Please observe the surroundings before use, and do not use the product in an environment where people are running
- This product is not intended for use by children under 3 years of age
- Do not use this product alone by children to avoid inadvertent injury
- Do not use the main machine body in liquid to avoid water damage
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>