perle IDS-106GE Industrial Gigabit Switch User Manual
- June 12, 2024
- perle
Table of Contents
perle IDS-106GE Industrial Gigabit Switch
Product Information
The IDS-106GE Industrial Gigabit Ethernet Switch is an unmanaged switch designed for industrial applications. It features 8 ports, with 6 RJ45 ports supporting 10/100/1000 Mbps and 2 SFP slots for 100/1000Base-X SFP modules. The switch is supplied by Perle, Cisco, or other MSA compliant manufacturers. It has a fan-less design with no moving parts, allowing for reliable operation in harsh industrial environments. The switch supports a wide operating temperature range of -40 to 75°C and has redundant dual power input with reverse polarity protection. QoS (Quality of Service) is also supported, allowing for prioritization of messages.
For automation and industrial control systems using EtherNet/IP or PROFINET, the IDS-106GE switch provides security and easy installation. It comes with a mounting kit and has a rugged metal housing.
Technical Specifications
Interfaces
- 6 x RJ45 ports for 10/100/1000Base-TX up to 100 meters
- 2 x SFP slots for 100/1000Base-X SFP modules
- 1 x Alarm Contact relay output
Power
- Dual Power Input: 12/24/48VDC (9-55VDC)
- Power Consumption: 5.55W max
- Power Connector: 7-Pin Removable Terminal Block
- Overload Current Protection: 2A fuse
- Reverse Polarity Protection: Yes
Switch Properties
- Standards: IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX/FX, IEEE 802.3az Energy Efficient Ethernet, IEEE 802.1p Quality of Service (QoS)
- Processing Type: Half-duplex back-pressure and IEEE 802.3x full-duplex flow control
- Auto MDI/MDIX: Yes
- MAC Address Table Size: 4K
- Packet Buffer Memory: 1.5 Mbit
- Jumbo Frame Size: 9216 bytes
- Forward/Filtering Rate: 14,880pps for 10Mbps, 148,810pps for 100Mbps, 1,488,100pps for 1000Mbps
Indicators
- Power LED 1: Green when power is applied
- Power LED 2: Green when power is applied
- Fault LED: Red when a fault is detected
- RJ45 / SFP Ethernet LED: Solid green for established link and blinks green when activity is detected (per port)
Environmental Specifications
- Operating Temperature Ranges: -40 to 75°C
- Storage Temperature Range: -40 to 85°C
- Operating Humidity Range: 5% to 90% non-condensing
- Storage Humidity Range: 5% to 95% non-condensing
- Operating Altitude: Up to 3,048 meters (10,000 feet)
- Chassis: Metal with IP40 ingress protection rating
- Din Rail Mountable: Yes, mounting kit included
Product Usage Instructions
To use the IDS-106GE Industrial Gigabit Ethernet Switch, follow these instructions:
- Mount the switch on a standard 35 mm DIN rail using the included mounting kit.
- Connect your network devices to the switch using RJ45 cables. The switch has 6 RJ45 ports supporting 10/100/1000Base-TX.
- If you need to connect devices using fiber optic cables, insert compatible 100/1000Base-X SFP modules into the 2 available SFP slots.
- Ensure that the power input is within the supported range of 9-55VDC. Connect the power source to the 7-Pin Removable Terminal Block power connector.
- The Power LED 1 and Power LED 2 should turn green, indicating that power is applied.
- If a fault is detected, the Fault LED will turn red. Check the connections and power source if this occurs.
- The RJ45 / SFP Ethernet LEDs will indicate link status and activity. A solid green light means an established link, and blinking green indicates activity on that port.
With proper installation and connection, the IDS-106GE
Industrial Gigabit Ethernet Switch will provide reliable network connectivity
for your industrial applications.
8-Port Industrial Gigabit Ethernet Switches | IDS-106GE
perle.com/products/switches/ids-106ge-8-port-unmanaged-industrial-gigabit-
switch.shtml
IDS-106GE
Industrial Gigabit Switches
8-port Compact DIN Rail Switches
- 6 x RJ45 ports with 10/100/1000 Mbps on all ports
- 2 x SFP slots for 100/1000Base-X SFP modules supplied by Perle, Cisco, or other MSA-compliant manufacturers
- Redundant dual power input 12/24/48 VDC
- Reverse polarity protection
- Fan-less design with no moving parts
- -40 to 75C industrial operating temperature support
- QoS (Quality of Service) prioritized messages
With a combination of six Gigabit copper ports, and two SFP fiber ports for
long-distance connectivity, Perle IDS-106GE IndustrialGigabit Ethernet
Switches are designed for easy deployment in industrial environments with
harsh operating conditions and limited space. Designed to stand up to extreme
temperatures, surges, vibrations, and shocks found in industrial automation,
infrastructure, transportation, security, oil and gas, and mining the IDS-
106GE Switches are economical easy-to-use devices, that provide essential
industrial Ethernet networking functionality.
These unmanaged switches support 9 to 55VDC redundant power input and provide
a relay alarm for power failure. The full/half-duplex auto-negotiation and
auto MDI/MDIX operation simplify installation and setup for convenient
connection of a variety of network devices. And, QoS support allows for
traffic prioritization and effective management of resources.
For automation and industrial control systems using EtherNet/IP or PROFINET, these rugged, DIN rail mountable switches with metal housing provides security and easy installation (mounting kit is included).
Hardware & Technical Specifications
IDS-106GE Industrial Gigabit Switches
Interfaces
Power
Switch Properties
Indicators
Environmental Specifications
Product Weight and Dimensions
-
Weight 0.336 Kg, 0.74 lbs
45x75x100mm (W x D x H) -
Dimensions (1.77″x2.95″x3.94″)
Packaging
-
Shipping Weight 336g (0.74lbs)
-
Shipping Dimensions 45x75x100mm, 1.77″x2.95″x3.94″ (W x D x H)
Industrial Ethernet Switch with DIN Rail attachment -
Contents Shipped Terminal block
Installation guide
Standards and Certifications
-
Safety UL 61010
FCC Part 15 Class A
VCCI Class A -
EMC Emissions EN 61000-6-4
ICES-003
EN 55032
EN 61000-6-2
EN 61000-4-2 (ESD)
EEN 61000-4-3 (Radiated RFI) -
EMC Immunity EN 61000-4-4 (Burst)
EN 61000-4-5 (Surge)
EN 61000-4-6 (Induced RFI)
EN 61000-4-8 (Magnetic field) -
Industrial EN 50121-4
-
Environmental Test Compliance IEC 60068-2-6 Fc (Vibration)
IEC 60068-2-27 Ea (Shock) -
Environmental Reach, RoHS and WEEE Compliant
ECCN: 5A991 -
Other HTSUS Number: 8517.62.0020
5 year warranty
IDS-106GE Industrial Gigabit Switches
Mechanical drawings of IDS-106GE Industrial Gigabit Switches
Product Image|
Description
| Power Cord| Product Number
---|---|---|---
| IDS-106GE-2SFP Industrial Gigabit Switch with 8-ports: 6 x 10/100/1000Mbps
RJ45 Ethernet ports and 2 x 100/1000Mbps SFP slots (empty). -10 to 60C
operating temperature.| None| 07017370
IDS-106GE-2SFP-XT Industrial Gigabit Switch with 8- ports: 6 x 10/100/1000Mbps
RJ45 Ethernet ports and 2 x 100/1000Mbps SFP slots (empty). -40 to 75C
operating temperature.| None| 07017390
References
- 8-Port Industrial Gigabit Ethernet Switches | IDS-106GE | Perle
- Environmental Policy | Fiber & Serial to Ethernet | Perle
- 8-Port Industrial Gigabit Ethernet Switches | IDS-106GE | Perle
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>