KOHLER 1413578-T2 Two Port Thermostatic Valve With Integral Volume Control Instruction Manual
- June 12, 2024
- Kohler
Table of Contents
KOHLER 1413578-T2 Two Port Thermostatic Valve With Integral Volume Control
Instruction Manual
Installations Instructions
WARNING: Risk of scalding. High water temperature can cause severe burns. Set the valve water temperature at or below 120°F (49°C). Refer to the temperature adjustment instructions for the valve.
Follow all local plumbing and building codes.
-
Sealant Tape
-
Maximum distance to the ęnished wall surface.
-
Minimum distance to the ęnished wall surface.
-
Create space in the wall for the valve and piping.
-
Connect the water supplies.
-
To invert the hot and cold supply lines, swap the cartridges.
-
Connect the piping for the shower ęĴingsǯ Connect only to the top or boĴom port for each valve.
-
Check all connections for leaks.
-
Complete the ęnished wall.
Need help? Contact our Customer Care Center.
- Thailand: [email protected], +(66) 2700-9299
- Australia: 1800 KOHLER (1800-564-537)
- New Zealand: 0800-564-537
- Mainland China: +(86) 800-820-2628, +(86) 400-820-2628
- Hong Kong (China), Macau (China), Taiwan (China): +(852) 3125-7728
- Brunei, Guam, Indonesia, Japan, Malaysia, Mongolia, Philippines,
Singapore, South Korea, Vietnam: +(86) 21-2606-2572
This product is covered under the Five-Year Limited Warranty for
KOHLER ® Faucets, found in the packed Compliance ertięcation
2 1413578-T2
