TOUMEI AK Series Smart Projector User Manual

TOUMEI AK Series Smart Projector

Product Information
 It is a device that complies with FCC radiation exposure limits for an uncontrolled environment.

Radiation Exposure Statement
This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. It is important to ensure that this transmitter is not co-located or operating in conjunction with any other antenna or transmitter.

Product Usage Instructions

1. Ensure that the product is installed in a suitable location with a minimum distance of 20cm between the radiator and your body.
2. Avoid placing the product near any other antennas or transmitters to prevent interference.
3. Refer to the user manual for specific instructions on how to operate and configure the product.
4. Follow all safety guidelines and precautions mentioned in the user manual.
5. If you experience any issues or have any questions regarding the product, refer to the troubleshooting section in the user manual or contact customer support for assistance.

Sound Settings

1. Key Tone: On / Off
2. Sound Effect: Standard/ Vivid
3. Boot Sound: On / Off

Select language
Homepage>Settings>Language

System Settings

System upgrade

1. Online upgrade /U disk upgrade
2. Restore factory settings: Select restore factory settings(Be cautious)
3. Device information:

Projector model/System version/ UI version/MCU version/ROM/RAM /Eth Mac.
Note: It is not recommended to upgrade the built-in APP, which may cause incompatibility problems.

Online Upgrade

1. Homepage> Settings> System Settings> System Upgrade. Before you update, please connect the power adapter and wifi, otherwise, the update will fail or the system will crash.
2. If there is no reaction, please return to settings and try again, after finishing the update, the system will turn on automatically.
3. If it shows the latest version of software then the system is up to date.

Switch to bluetooth speaker mode

1. Turn on the bluetooth function in the settings;
2. Short-press the power button on the remote control or long-press the on/off button of the machine, select the bluetooth speaker mode then you can start the bluetooth pair and connection to use;
3. If you want to stop the Bluetooth speaker, press the power button on the remote control or the on/off button of the machine to wake up the projector and quit the bluetooth connection automatically.

Attention
For some high-version apps, you need to use a mouse to perform comprehensive and fast operations, such as Netflix and YouTube…etc.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions
without restriction.

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>