HUUM Safety Railing for Steel Heaters User Manual
- June 12, 2024
- HUUM
Table of Contents
HUUM Safety Railing for Steel Heaters
Product Information
This product is a safety railing designed for use with a sauna heater. It is used to provide support and prevent accidents while using the sauna.
Product Usage Instructions
- Screw the supports to the wood profiles without tightening the inner screw. This will allow for easier placement later on.
- Create a full railing by connecting the wood profiles with 4 corner plates.
- Place the safety railing on the heater, ensuring that the heater’s outer wall locks between the supports’ side bends.
- Fix the untightened screws between the supports and wood profiles.
- Using pliers, bend the lower ends of the supports tightly around the heater wall to secure the movement of the supports.
- Ensure that all connections are secure and properly tightened.
- Congratulations! Your safety railing is now successfully installed and ready for use.
For more information about this product, you can visit the official website: www.huum.eu
Remember to always follow the manufacturer’s instructions and guidelines for the safe usage of the sauna and its accessories.
REQUIRED TOOLS
HOW TO FIX
SAFETY RAILING
- Screw the supports to the wood profiles without tightening the inner screw (for better placement afterward).
- Create full railing by connecting wood profiles with 4 corner plates.
- Place the safety railing on the heater in a way that the heater’s outer wall locks between the supports’ side bends.
- Fix the untightened screws between the supports and wood profiles.
- Bend (using pliers) the lower ends of the supports tightly around the heater wall to fix the movement of the supports. Well done!
Of Sauna
-
huumsauna
- www.huum.eu
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>