Baseus Bowie P1 Neckband Wireless Earphones User Manual
- June 12, 2024
- Baseus
Table of Contents
Baseus Bowie P1 Neckband Wireless Earphones
Please read this manual thoroughly prior to use, and keep it for future reference.
Pairing
-
Power on
Press and hold the multifunction button for 2s. The earphones automatically enter the power-on state. -
Wireless connection
Turn on the wireless function of the mobile phone to enter the search and pairing state. Select the device model: Baseus Bowie P1. -
Download the app and link the earphones to the app
-
Power off
Press and hold the multifunction button for 4s to power off the earphones.
Instructions
Music mode:
Play/Pause: Press the multifunction button
— Previous: Press and hold the Volume- button for 1.5s
-+Next: Press and hold the Volume+ button for 1.5s
. – Volume down: Press the Volume- button
. +Volume up: Press the Volume+ button
. Switching to low latency mode: Double-press the multifunction button
… Activating Voice Assistant: Press the multifunction button three times.
Call mode:
. Answer/Release a call: Press the multifunction button
Reject a call: Press and hold the multifunction button for 2s
Charging case indicator
During charging: The power indicator is steady on red Fully charged: The power indicator is steady on blue.
Restore to default settings
Turn off the wireless on the mobile phone. Press and hold the Volume+ and Volume- buttons simultaneously for 4s. When the blue indicator blinks 3 times, the operation is successful.
Tips for using the app
- Check the battery level using the app.
- You can select EQ mode and make custom adjustments in the app.
- Switch to low-latency mode using the app.
Note: Go to Settings>App>App launch>Open manually “Baseus” app: Allow Auto-launch, Allow secondary launch and running in background.
Warnings
Improper use of the product can easily cause damage to the product or may endanger personal and property safety.
- The battery is included in the product. Please avoid exposing your product to the sunlight, electric heater or similar overheating environments. Do not store the product in high temperature, strong light and strong magnetic places.
- Do not keep it in other harsh environments such as fire source. Intense physical actions such as knocking, throwing, trampling on and squeezing etc. shall be avoided. Do not use it in case of expansion.
- The ambient temperature of product is 0~45℃ .
- Inappropriate use of the product against this user manual or ignoring warnings can easily cause damage the product or may endanger personal and property safety. Consumer shall bear for all the consequences, to which our company will not assume any legal liability.
- Decomposition of this product by non-professionals is strictly prohibited.
- Do not use a load (electrical appliances) that exceeds the output current of this product. A circuit protection mechanism is built-in to automatically stop working if loads exceed.
- Do not put this product in water (or washing machine). If water enters the product, let it dry naturally before using it.
Specifications
Name: Baseus Neckband Wireless Earphones
Model No.: Baseus Bowie P1 2023
Wireless version: V5.2
Communication distance: 10m
Playtime: 30 hours (70% of the volume)
Battery capacity: 170mAh/0.629Wh (earphones)
Earphone rating input: DC5V⎓120mA
Earphone rating consumption current: 6.6mA
Charging time: About 2 hours
Frequency response range: 20Hz-20kHz
Charging port: Type-C
Suitable for: Compatible with most of wireless devices.
Content
-
Earphones ×1
-
Charging cable ×1
-
User manual ×1
-
Warranty card ×1
Disposal
This equipment complies with the provisions of Directive 2012/19/EU and
Directive 2006/66/ EU. It is strictly forbidden to dispose of this equipment
with ordinary trash. It must be recycled. This symbol indicates that the
product shall not be treated as regular domestic trash, and must be delivered
to a recycling center that is capable of recycling electronic and electrical
equipment
It is hereby declared that Baseus Bowie P1 2023，a product model of Shenzhen
Baseus Technology Co., Ltd., complies with the provisions of Directive
2014/53/EU and Directive 2011/65/EU. The full text of the EC Declaration of
Conformity can be found on the following
website:www.baseus.com
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
Declaration on hazardous substances and elements contained in electronic
products
Part Description|
Hazardous substances and elements
---|---
Lead (pb0
| Mercury (hg)| Cadmium(Cd)| Hexavalent chromium(Cr Vl)| Polybrominated Biphenyls(PBB)|
Polybrominated Biphenyl ethers(PBDE )
PCB
| | | | | |
Plastics
| | | | | |
Battery
| | | | | |
Accessory
| | | | | |
Charging cable
| | | | | |
This form is compiled in accordance with SJ/T 11364.
O： It indicates that the content of the harmful substance in all homogeneous
materials of the component is below the limit specified in GB/T 26572
standard.
X: The content of harmful substances in at least one homogeneous material of
this part exceeds the limit stipulated in GB/T 26572 standard. This product
complies with EU RoHS 2.0 Directive (2011/65/EU)
Warm Tip: The 5-year icon refers to the “effective life of environmental
protection”, not the product quality assurance period. Electronic products all
contain harmful substances such as lead, mercury and cadmium. Once they are
overused, harmful substances may leak or mutate, cause pollution to the
environment, or cause serious damage to people and property. The term of
“environmental protection use” means that all electronic products will be
required to use within this effective period. We will no longer be responsible
for the quality of the products due to the safety risks that arise after the
safe use period.
Customer Support
Manufacturer: Shenzhen
Baseus Technology Co., Ltd.
Add: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang
Rd,
Gangtou Community, Bantian Street, Longgang District, Shenzhen
Executive Standard: GB4943.1
Hotline: +1 800 220 8056 Website: https://www.baseus.com
Official After-sales E-mail Address：
care@baseus.com
Designed by Baseus ｜ Made in China
FCC ID:2A482-XP1
PB4564Z-P0A0
1100006441
Documents / Resources
|
Baseus Bowie P1 Neckband Wireless
Earphones
[pdf] User Manual
2A482-XP1, PB4564Z-P0A0, 1100006441, Bowie P1 Neckband Wireless Earphones,
Bowie P1, Neckband Wireless Earphones, Wireless Earphones, Earphones
---|---