CLOUDRAY EzCad2 Software Instruction Manual
- June 12, 2024
- CLOUDRAY
Table of Contents
Installation Instructions
EzCad2 Software
The EzCad2 software run on a PC with 900 MHz CPU and 256 MB RAM at least. In
general, we recommend the fastest PC available. EzCad2 was developed in
Microsoft Windows XP and will run in Windows XP, WIN7, WIN10and VISTA.
The installation of EzCad2 is very easy. Users simply need to copy EzCad2
folder that is in the Install FOLDER to hard disk, and then double click the
Ezcad2.exe under the EzCad2’s directory to run the software.
If user run the software without connect the fiber laser, a caution will
appear and the software will work at demo state. In demo state, we can
evaluate the software but we cannot save files and cannot control laser
device.
The Software, Drive and Correction file are in the U-disk that came with the
fiber machine.
Turn on the fiber laser Connect your fiber laser and PC via USB cable.
Before go to next step, please save the Driver file in the U- disk to your
computer, and remember where it is.
Device manager>>Other devices>>USBLMCV4>>Right click, Update driver>>Browse my
computer for driver software>>Browse, and find the Cloud ray folder you saved
from the Duisk that came with the fiber laser>>Select the LMCV4
driver>>Next>>Install, then the driver is installed successfully>>Send Escaid
to the desktop shortcut. As below pictures:
| 
---|---
| 
|
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>