Shenzhen Moldull Acoustic Technology MD002 True Wireless Earphones User Manual

Shenzhen Moldull Acoustic Technology MD002 True Wireless Earphones

Product Display

Specification

Bluatoo1h versio,n   V5.D              I 01)81″8ting fte()..,ency:2.402GHz- 2A800Hz

Bluatoo1h dlsla’lce! .. , 0 M           I Wsterproof level, IPX5
Battery, Polymer battery5V,45mAh I charging box: 300mAh
Charging time: Earphoneo 1H,Charging box 1H
Woll<ing time:5H depends on 1he t-,,pe of  song andthe volume
Support agreement,: AVRCP/A2DP/HFP/HSP

Basic operation

1. Power on: Take out the end of the earphone start it automatically or press the MFB key for 3 seconds.
2. Binaural pairing: Open the charging box cover or press the power button of the two earphones for 3 seconds with the same duration when it is turned off, tum on the Bluetooth of the mobile phone, search the Bluetooth device name: “MOLDULL • and click the device name to complete pairing.
3. Click: Lower volume In the left ear (L), and increase volume In the right ear (A). (The volume is increased or decreased with a slight hint, the volume is maximum or minimum.)
4. Double click: play/pause, answer/hang up; Long press 2 seconds in cell mode: call rejected.
5. Triple play: left ear (L), last, right ear (R), next.
6. Voice assistant: In connection mode, long-press the left/right eer function key for 2 seconds to open the voice assistant.
7. Power off: PUt It In the charging box and close the charging box cover to eutomaticelly power off or long-press the left and right ear function button for 5 seconds.
8. Restore factory Settings: After the earphone is connected, if you want to clear the pairing and restore factory Settings, first delete the Bluetooth pairing Information on the phone, put the earphone back In the charging box and take out the earphone, tap any LJR side for 5 limes in a row to clear the previous pairing information and restore factory Settings

Charging operation

1. For the first use, make sure that the power of the two headphones and the charging box are full.

Charging box charging

1. Connect the Type C port on one side of the charging box with a Type C cable, and connect the plug adaptor et to another and(Or plug the Type C output into the PC or computer terminal, and it will start charging. When charging, the charging box display screen will display the current power ratio, and display it after full charge
2. Make sure the charge bin is fully charged (or plugged into a Type C cable to charge as the instructions indicate)
3. Put the earphones into the charging box correctly and it will start charging.(you can Charge the charging box and earphones simultaneously; You can also recharge the charging box and then use It to charge your earphones. Once earphones are full, the charging box will automatically power off and the earphones’ LED will go off.)

Power on and off

1. 1. Power on Press and hold the multi-function button of the earphones for about 3-5 seconds until the LED light of the earphones flashes blue. At the same time, there will be a “boot• prompt sound;(Or take the earphones out of the charging box and It will boot up automatically.)
2. Power off: Hold down the multifunction button for about 5 seconds until the LED red light flashes twice and the power off is accompanied by the power off prompt (or put the earphones back In the charging compartment end it will automatically power off).

Bluetooth pairing instructions

1. Take out the left and right earphones in the charging box, tum on the blue light, and flash red and blue in the pairing process.The red and blue lights In the back main ear matched with the earphone alternately shine, and the blue lights in the second ear will breathe fOr a successful teem. Open the mobile device to search for the headset pairing name “MOLD ULL” (for some phones, enter ·oooo· as the pairing password) and cllck the connection to complete the pairing.
2. Manually turn on the blue light, and the pairing process will be alternately red and blue. After pairing with the earphone, the red and blue light in the main ear will be alternately shining, and the blue light in the second ear will be shining. Open the phone device and search for headset pairing name “MOLDULL” {for some phones, enter “0000” as the planning password). Click the oo~nection to complete the pairing.

Charging Precautions

1. After using for a period of ttme, the contact oxidizes and the earphones fail to charge or turn on the machine. Firstly, use alcohol and cloth to clean the two thimbles of the contact and charging tank, which can be solved.
2. When you put the earphones back In the pod, they shut down and start charging. If you take it out again, they automatically tum on and pair with each other.

Storage and maintenance

1. storage Please store in a cool and dry place.
2. Maintenance:
3. The recommended operating temperature range Is 0-35’C; Too cold, too hot, or a high-temperature environment will reduce the battery life, and affect the product performance.
4. Do not use it In thunderstorms.
5. Please charge the battery before using it, after not using it for a long time.
6. Please uses a dry soft cloth to clean the earphones.
7. if there is water or sweat et the slot, wipe it dry with a dry cloth, which will not affect normal use.
8. Keep away from sharp and hard objects, which may damage the product easily.

Package contents

FCC Instructions

This product has been tested and found to comply with the limits for a Class 8 digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference ce in a residential installation. This product generates,. uses and can rad ate radio frequency energy and, if not installed and used in accordance with the instructions,. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular i1stallation. If the product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the rec-:iving antenna.
• Increase the separation between the product and receiver.
• Connect the product into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>