REDRAGON VEIGAR 94 Key Mechanical Gaming Keyboard Instruction Manual
- June 12, 2024
- REDRAGON
Table of Contents
94-KEY MECHANICAL GAMING KEYBOARD
Please scan here to download user manual
Mechanical Gaming Keyboard Operating Instructions
Dear user
Thank you for choosing product. To protect your rights and for better customer service, please read the following warranty rules carefully.
- Within 18 months of purchase date, repair is guaranteed for failure due to electrical circuit problems. Other damages, such as disassembly, hard impacts, submersion into water, plugging into improper current or voltage, and damage caused by natural disasters such as fire, flood, or earthquake are not included.
- Consumable parts (such as foot pads) and spare parts replacement are not included in our warranty.
OS Support
Win XP/Vista/Win7/Win8/Win10 /Win11/Mac OS
How to connect the keyboard with multi-ple devices Wired Connection
- Slide the ON/OFF switch on left side of the keyboard to OFF.
- Take out the USB A to USB Type C cable in the package and connect the keyboard with your computer, the computer will recognize and configure the keyboard automatically.
- Once the keyboard is powered up, charging begins. The LED marked with “ M ” lights on red. It will turn to white when keyboard is fully recharged.
2.4G Wireless Connection
- Slide the ON/OFF switch on left side of keyboard to ON.
- press [FN]+[4] for about 3 seconds, the LED marked with “ M ” flashes quickly in green, plug the USB receiver into any available USB port on your computer within 20 seconds. The computer will recognize and configure the keyboard automatically.
- The indicator will flash on Red when the battery is low. Please recharge the keyboard in time by plug type C cable into computer or it will turn off automatically soon, Please note LED marked with “ M ” will be light on Red while charging, it turn to Green when charging completed( In 2.4g connecting mode)
Bluetooth Connection
- Slide the ON/OFF/BT switch on left side of keyboard to ON.
- Press [FN]+[1 ](or [2]/[3] for other Bluetooth devices), the LED marked with “ M ” flashes in blue (or cyan/magenta for the others)
- Turn on Bluetooth and scan for available devices on your computer or smart phone. It will find “3.0 Keyboard or 5.0 Keyboard” device. Select one of them to get connected with it automatically.
- The indicator will flash in Red when the battery is low. Please recharge the keyboard in time by plug type C cable into computer or it will turn off automatically soon, Please note LED marked with “ M ” will be light on Red while charging, it turn to cyan/magenta when charging completed( In Bluetooth connecting mode).
Function Introduction
- With standard USB and 2.4G/BT connections, the keyboard can be used on computer without any software or driver installation.
- There are 20 backlight effects.
- Commands of key combinations with [FN] key
[FN]+[N]: Change backlight mode. There are 20 backlight effects.
[FN]+[M]: Change back light color.
[FN] + [←]: Slow down the running speed of backlight .
[FN] + [ →]: Add up the running speed of backlight.
[FN] + [Win]: Disable or enable the [Win] key.
[FN] + [1]: Select Bluetooth device one (for Bluetooth connection).
[FN] + [2]: Select Bluetooth device two (for Bluetooth connection).
[FN] + [3]: Select Bluetooth device three (for Bluetooth connection).
[FN] + [4]: Change to 2.4G wireless connection. Press and hold the [FN]+[4]
for 3 seconds to pair the keyboard with its receiver.
[FN] + [ESC]: Set the keyboard to default setting.
[FN] + [PrtSC]: Turn ON/OFF backlight
[F1] + O: ScrLK
[FN] + P: Pause
[FN] + [ . > ]: PAGE UP
[FN] + [ / ? ]: PAGE DN
Multi-Media function
FN+F1 My computer
FN+F2: Open browser
FN+F3: Calculator
FN+E4: Media player
FN+F5: Previous track
FN+F6: Next track
FN+F7: Play/Pause
FN+E8: Stop
FN+E9: Mute
FN+F10: Volume-
FN+E11: Volume+
FN+F12: My Email
How to recharge the keyboard
Find the USB A to USB type C cable in the packaging ,plug the keyboard and
connect it with computer for charging, the LED indicator(M) of keyboard will
be turn to red.
Remark: The LED indicator (M) will turn to red when keyboard is out of
battery.
FAQ
- If the keyboard doesn’t respond, please check if the keyboards USB cable is correctly inserted into the corresponding USB port on the computer, or try another USB port on the computer.
- If you spill liquid on the keyboard, please unplug the keyboards USB cable from the computer immediately. Wipe off excess liquid and put the keyboard in a dry and ventilated place. Make sure the keyboard is dried naturally before the next use
BATTERY SAFETY GUIDELINES
DO NOT replace the battery with a different model.
DO NOT use this product if the battery shows signs of damage including, but
not limited to tearing, deformation, leakage, or the smell of electrolytic
material.
DO NOT touch the battery fi material is leaking and seek immediate medical
attention if any material comes into contact with your skin or eyes.
DO NOT expose the battery to liquid, heat sources, electricity (outside of the
product itself), or other non-standard operating condition.
DO NOT remove the battery except for proper disposal and recycling as required
by local laws and regulations.
DO NOT impact, bend, alter, dissemble, or otherwise damage the battery as the
contents are volatile, hazardous, and can be harmful.
CAUTION:
Failing to follow all safety guidelines may result product damage, explosion,
fire, and/or electric shock.
This device contains licence-exempt transmitter(s) /receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence- exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.