ALTEC LANSING IMT7000 Shockwave Wireless Party Speaker User Guide

ALTEC LANSING IMT7000 Shockwave Wireless Party Speaker

Product Information

• Product Name: IMT7000
• Model Numbers: IMT7000, IMT7100, IMT7200, IMT7300
• Item Names: Shockwave Wireless Party Speaker, Shockwave 200 Wireless Party Speaker, Shockwave 300 Wireless Party Speaker, Shockwave 400 Wireless Party Speaker
• Pairing Names: AL Shockwave, AL Shockwave 200, AL Shockwave 300, AL Shockwave 400

Product Usage Instructions

Power and Volume Control

Power Button: Press and hold the button for 3 seconds to power on or power off the speaker.

Volume Control: Press the volume up button to increase volume and the volume down button to decrease volume.

Song Control

Next/Previous Song: Press the next song button to play the next song and the previous song button to play the previous song.

Light Mode Control

Light Button: Briefly press the button to turn on/off the light mode and switch between the 9 available light modes.

Bass Mode Control

Bass Button: Briefly press the button to switch between the 3 available bass modes.

Bluetooth Connection

1. Go to the Bluetooth settings menu on your phone and make sure Bluetooth is turned on.
2. Connect to the device listed as “AL Shockwave” in the Bluetooth settings menu.
3. The speaker will enter Bluetooth mode when powered on. Briefly press the BT button to enter Bluetooth mode.
4. If you want to change to a different Bluetooth device when already paired, press and hold the BT button. The speaker will disconnect from its paired device, and you can now pair a different device.

Party-sync with AL SHOCKWAVE Family

Party-sync Button: Briefly press the button to enter Bluetooth pairing mode. Press and hold for Bluetooth disconnect. Double-click for party-sync connect or disconnect.

1. Connect one speaker to your Bluetooth device in the normal way via Bluetooth.

2. Double-press the BT button on the next speaker to enter
   Party-sync mode. The speaker will find and connect to the first (primary) speaker.

3. Repeat step 2 if you have more speakers you want to connect.

4. To exit party-sync, double press the BT button on the speakers you wish to disconnect and return to normal operation.

Resetting to Default Settings

Reset Button: Press and hold the BASS button for 10 seconds to reset all settings back to factory default.

Lighting Control

LIGHTS Button: Briefly press the button to switch lighting modes. Each press moves to the next mode and back round to off.

Note : Some modes which use ‘sound-to-light’ need music playing to be visible.

WHAT’S INCLUDED

SPEAKER CONTROLS

Brief introduction to buttons on top panel

Indicators:

• : Power on (Solid blue)
• : Bluetooth pairing (Flashing blue quickly), Bluetooth connected (Solid blue), Sync up with other speakers (Flashing blue slowly)
• : AUX mode （Solid orange）
• : Bass 1, Bass 2, Bass 3 (Solid Blue)

Reset to default settings:

Press and hold the BASS button for 10S to reset all settings back to factory default

Bluetooth Connection

Go to the Bluetooth settings menu on your phone. Make sure that Bluetooth is turned  on.  Connect to the  device  listed as “AL Shockwave

• The speaker will enter into BT mode when powered on;
• Briefly press the BT button to enter into BT mode;

If you want to change to a diferent BT device when already paired press and hold the BT button, the speaker will disconnect from its paired device. A diferent device can now be paired.

Party-sync with AL SHOCKWAVE Family

A double press of the BT button is used to enter/exit party-sync mode on extra speakers if you have them as below.

The Altec Lansing SHOCKWAVE family has four members that support party-sync. You can mix and match between any of these four models, setting up one speaker as the primary unit connected to up to 100 other speakers all playing in sync.

1. Connect one speaker to your Bluetooth device in the normal way via Bluetooth.
2. Double-press the BT button on the next speaker to enter Party-sync mode, its BT LED will flashes slowly and it will find and connect to the first (primary) speaker.
3. Repeat No 2 if you have more speakers you want to connect.
4. To exit party-sync double press the BT button on the speakers you wish to disconnect and return to normal operation.

Notes:

1. Playback volume is adjusted via the first (primary) speaker.
2. The BT playback controls only operate on the first (primary) speaker.
3. Turning off the first (primary) speaker turns off all speakers.
4. All secondary speakers can be turned on/off individually and their light modes changed via their individual controls.

LIGHTING CONTROL

Briefly press the LIGHTS button to switch lighting mode.
( Note : Some modes which use ‘sound-to-light’ need music playing to be visible)

Each press moves to the next mode and back round to off.

• Mode 1: Rotating ring in three colors
• Mode 2: Flashing to music
• Mode 3: ‘Spectrum’
• Mode 4: ‘Stacking/re-stacking’ lights both sides
• Mode 5: Rotating lights in multi-colors
• Mode 6: Breathing on/off
• Mode 7: Flashing to music, solid lighting when no audio
• Mode 8: ‘Bar-graph’ in multi-colors
• Mode 9: Rotating ‘stacking/re-stacking’ lights

INPUT/OUTPUT PORTS

Descriptions about the various ports on the speaker

SPECIFICATIONS

• Power Audio: 60W (Peak) Total
• Drivers Units: 4” Bass, 2” Tweeter + Rear Auxiliary Bass Radiator.
• S/N: ≥70dB
• Distortion: ≤0.5%(1K,1W)
• USB-A output: 5V 1A
• USB-C charging Input: 5V   2.5A
• Dimensions: L205H315D172 mm

Length of Charging cable (USB-A to USB-C): 90cm

SAFETY PRECAUTIONS

Having Trouble? We’re here to help!

Call us 24n at 1-855-292-4087 E-mail us at support@alteclansing.com or visit us at alteclansing.com

FCC STATEMENT

Changes or modifications not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment. This device complies with Part 15 Of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient Or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Supplier’s Declaration of Conformity 47 CFR § 2.1077

Compliance Information Unique Identifier

• Trade Name: Altec Lansing Model No.: IMT7000
• Responsible Party – U.S. Contact Information
• US Company Name: SAKAR INTERNATIONAL INC.
• Address: Edison, NJ 08817
• Telephone number or internet contact information: 855-292-4087

RF Exposure Compliance

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body

This warranty covers the original consumer purchaser only and is not transferable.

This warranty covers products that fail to function properly UNDER NORMAL USAGE. due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year.

What Is Not Covered by Warran ty:
Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions from other than normal use, including but limited to, repair by unauthorized parties, tampering, modification or accident.

To Obtain Warranty Service and Troubleshooting Information:
Call 1-855-292-4087 or Visit our website at www.alteclansing.com.

To receive Warranty service along with the name and address of an authorized product service center, the original consumer purchaser must contact us for problem determination and service procedures. Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that the Product is within the applicable Warranty period(s). MUST be presented in order to obtain the requested service. It is your responsibility to properly package and send any defective products along with a dated copy of proof of purchase, a written explanation of the problem, and a valid return address to the authorized service center at your expense. Do not include any other items or accessories with the defective product. Any products received by the authorized service center that are not covered by warranty will be returned unrepaired.

NO WARRANTIES, WHETHER EXPRESS OR IMPLIED. INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY. DISTRIBU TOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR. REPAIR, REPLACEMENT, OR REFUND OF THE ORIGINAL PURCHASE PRICE – AT DISTRIBUTOR’S SOLE DISCRETION -ARE THE EXCLUSIVE REMEDIES OF THE CONSUMER. IN NO EVENT WILL DISTRIBUTOR, ITS MANUFACTURERS, OR SAKAR INT. BE LIABLE FOR ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE USE, MISU SE OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL APPLY. NO TWITHSTANDING THE FOREGOING, CONSUMER’S RECOVERY AGAINST DISTRIBUTOR SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT SOLD BY DISTRIBUTOR. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT TRANSFERABLE.

Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential damages or allow limitations on warranties, so limitation or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights that vary from state to state or province to province. Contact your authorized retailer to determine if another warranty applies. This product is manufactured, distributed and sold by SAKAR International, Inc. All other trademarks are the property of the respective owner, who has not sponsored, endorsed or approved this product.

IMPORTANT SAFETY INSTRUCTIONS

1. 1. Read these instructions – All the safety and operating instructions should be read before this product is operated.
2. Keep these instructions – The safety and operating instructions should be retained for future reference.
3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered
4. Follow all instructions – All operating and use instructions should be
5. Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like.
6. Clean only with dry
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce
9. Do not defeat the safety purpose of the polarized or grounding A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug the apparatus during lightning storms or when unused for long periods of
14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. CAUTION : These servicing instructions are for use by qualified service personnel To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
16. WARNING ：To reduce the risk of fire or electric shock, do not expose this apparatus to rain or The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus.
17. WARNING ：For the terminals marked with symbol of “ ” may be of sufficient magnitude to constitute a risk of electric shock. The external wiring connected to the terminals requires installation by an instructed person or the used of ready-made leads or
18. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical
19. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
    Warning : To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.
    The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Sakar International is under license. Other trademarks and trade names are those of their respective owners.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>