LED Smart TV User Manual

June 12, 2024
LED

LED Smart TV - logo LED Smart TVUSER’S MANUAL
WITH WARRANTY CARD

I MPORTANT
Please read this manual carefully before installing and operating the TV.
Keep this manual handy for further reference

SAFETY PRECAUTIONS

WARNING
KEEP UNNEEDED SMALL PARTS AND OTHER OBJECTS OUT OF THE REACH OF SMALL CHILDREN. THESE OBJECTS CAN BE ACCIDENTALLY SWALLOWED. ALSO, BE CAREFUL ABOUT PACKAGING MATERIAL AND PLASTIC SHEETS.
Set up
Do not place the TV set on sioped or unstable surfaces
Do not place any objects on top of the TV set. If water spils onto the TV sat or foreign objects get inside it
Short-circuiting may occur which could result in fire or electrc shock.
If any foreign objects get nside the TV set, please consuit an Authorized Service Center.
Do not cover the ventiation holes. Doing so may cause the TV set overheated and can cause fire or damage (o the. TV sat.
Avoid nstalling this product near electronic equipment that i readily affected by elecromagnetic waves.
It may cause Interference in image, sound, etc. In particular keep video equipment away from this product.
AC Power Supply Cord
Securely insert the power cord plug as far as it willgo. If the plug is not fully inserted, heat may be generated which ould cause fire. Ifthe plug is damaged o the wall socket plate s loose, they should not be used.
Do not handie the power cord plug with wet hands. Doing so may cause electric shocks Do ot do anything that might damage the power cable. When disconnecting the power cable, hold the plug, not the cable
Do not make any modifications to, place heavy objects on, place near hot objects, heat, bend, twist or forcefully pul the power cable. Doing so may cause damage to the power cable which can cause fie or electric shock. If damage 10 the cable is suspected, have it repaired at an Authorized Service Center.
Ifthe TV set will not be used for a long period of time, unplug the power cord from the wal outiet

If Problems Occur During Use
If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odor is detected from the TV set, unplug the power cord immediately. Continued use of the TV under thesa conditions might cause fire or permanent damage to the unit. Have the TV evaluated at an Authorized Service Center. Service to the TV by any unauthorized personnel s strongly discouraged due to s high voltage dangerous nature.
If water o foreign objects get nside the.
TV set, ifthe TV setis dropped, o fthe cabinet becomes damaged, disconnect the power cord plug immediately.
‘Contact an Authorized Service Center for any repairs that need to be made
‘When using the TV set
Do not bring your hands, face or objects close to the ventilation holes of the TV set. Top of the TV set is usually very hot due to the high temperature of exhaust air being released through the Ventilation holes. Burns or personal injuries can happen if any body  parts are brought t0o close. Placing any object near the 1op of the TV could also resultin heat damage o the object as well as fo the TV if s ventiation holes are biocked.
Be sure o disconnect al cables before moving the TV set. Moving the TV with its cables attached might damage the cables which, n tum, can cause fre or electrc shock.
Disconnect the power plug from the wall outlet as a safety precaultion before carrying out any cieaning.
electric shocks can result i ths is not done.
Clean the power cable regularly to prevent it from becoming dusty. Built-up dust on the power cord plug can increase humidity which might damage the insulation and cause fire. Unplug the cord from the wall outlet and clean twith a dry cloth.
“The TV shall not be exposed to crpping or splashing. No objecis filed with liuids, such as vases, shall be placed on the TV.
This TV set radiates infrared rays; therefore, it may affect other infrared communication equipment.Install your infrared sensor in a place away from direct or reflected light from your TV set.

Control Panel

Familiarizing Yourself with the Main Hardware
(The picture of the product may vary dependin g on the model)LED Smart TV -
control panelG. Volume up (Vol +)
F. Volume down (Vol -)
E. Channel up (ch+)
D. Channel down ~ (Ch-)
C. Main Menu display and menu selection
B. Select signal input./Source
A . Power

REAR PANEL

Rear panel
(The picture of the product may vary depending on the model)
LED Smart TV - real panel Note

  • When other device is connected to the TV set, please carefully read the operation instruction concerning external setup.
  • When other device is connected to the TV set, please switch off the unit and switch on the unit after confirming that the connection is proper.

LEARNING ABOUT REMOTE CONTROL

LED Smart TV - remmote control* Functionality of the keys, may vary as per the Product

  • Note: Picture may not match exactly with the Original.

Main Menu

The Main Menu Ul are as follow.
Press the Button ( )LED Smart TV - setting 1

SELECT THE APP LED Smart TV - setting 3System Setting:-
Select Setting in main menu to enter the system setting LED Smart TV -
setting 5Network Setting
Select the Network Setting. LED Smart TV - setting 7LED Smart TV -
setting 2Wireless Network
Select the WIFI! and type the password to connect# LED Smart TV - setting
4Time
Pressthe ( )& ( ) to select the Time to set. LED Smart TV - setting
6Date
Press the ( )& ( ) to select the Date to set. LED Smart TV - setting
28

AutoAttach  Get the current time and date automatically.
24 Hours Select the 12 hours or 24 hours.
Time Zone Select the local time zone.
Time Edit Edit the current time and date.
Date Format  Set current  date format.
Language Setting Select current display language.
Input Method Select the Input method.
System Upgrade  Upgrade to the newest system version
System Recovery Recovery system to original state

LED Smart TV - setting 9 About
Information about the TV. LED Smart TV - setting 11Multimedia
Press the Enter key to select Media source. LED Smart TV - setting
13Press the Enter key to select the Music, Movie & Picture. LED
Smart TV - setting 8Music
Press the or Enter key to select the Music. LED Smart TV - setting
10Photo
Press the button to select the Photo. LED Smart TV - setting
12Folder
Press the or Enter key to select the Folder. LED Smart TV - setting
14Input Source

LED Smart TV - setting 15 Press INPUT button to enter input source

TV Setting

Press the MENU button to enter the TV Setting.
PictureLED Smart TV - setting 16 Press the to set the picture.
Picture Mode
Highlight the item and Press ENTER to enter the sub-menu, that shows the picture mode you can choose:
Dynamic/Standard/Mild/User.
Contrast Adjust the white level of the picture
Brightness Adjust darkness of black sections in the picture.
Color Adjust the color intensity of the picture.
Sharpness Object edges are enhanced for picture detail.
Sound
Press to select soundLED Smart TV - setting 17Select
toadjust.
Sound Mode
Standard/Music/Movie/Sports’ User
Only i this mode Treble and Brass can be adjusted
Bass
Adjust the low frequency sounds.
Treble
Adjust the high frequency sounds
Balance
Adjust the level of sound coming from the left and right speakers.
Ave
Press LIR to set or cancel. When set on, it willlevel out the sound being heard when sudden changes in volume. occur during commercial breaks or channel changes.

SPDIF
Select to ON/OFF ………………………Digital Interface
Surround
Selectto ON/OFF ………………………..Surround

Setting

Press  toselect setting. LED Smart TV - setting 18

Selact to adjust.
LED Smart TV - setting 19 Blue Screen
Setthe background color to blue or black when no input signal
Blue Screen
Set the background color to blue or black when no input signal
Channel Switch Mode
Select the Black Screen or Freeze Screen.
Reset
Recall the default setting.
Reset
Press gotoRestore.LED Smart TV - setting 20Press the Numeric button & enter the password. LED Smart TV - setting 21Time

LED Smart TV - setting 22 Press toselectthe lock
LED Smart TV - setting 23 Channel
Press & toselect Channel.
LED Smart TV - setting 24Select toadjust.

LED Smart TV - setting 25

Antenna Type Selectthe Antenna Type(Air/Cable).
Anolog Manual Scan Searching the programs automatically.
Auto Scan Searching the ATV Programs by input the frequency.
Digital Manual Scan Searching the DTV Programs by input the frequency.
Channel List Listthe programs.
Preferences Set your preference about audio.

LED Smart TV - setting 26Auto Scan
Auto Scan will search for available channels and program receivable channels.
Press select Auto Tunning, then  Press OK to start auto search
If you want to stop searching, press EXIT to Stop searching.
Channel
Setthe channel number.
Color system
Select the color system.
(PAL/SECAM/NTSC)
Sound System
Select the sound system.
(DK/BG/I)
Frequency
Input the frequency of the channelLED Smart TV - setting
27Pressthe toselect Channel List.

|  PresstoEditthe Channel List.
---|---
|  Presstodelete the channel.
| Press o enter the rename stat, then select the word you want to change, and select word.
| Press to skip the select channel. (Your TV set will ‘skip the channel automatically when using CH+/- to view the channels )

HELP

No Power| Check the AC cord of TV is plus in or not. If still no power. please pull out the plug and replug in alter 60 seconds. And open the TV again.
---|---
Signal receive not property| •To cause double image or phantom if there has high building or high mountain round TV. You can adjust image effect by manually operation : consult instruction of vernier regulation or change the direction of external antenna.
•If you use the indoor antenna, under certain circumstance, receive will be more difficult. So you can change the direction of the antenna to adjust the image effect. If can’t change image receiving effect either, you have to use external antenna.
No picture| •Check the antenna at the back of TV is connected properly or not
•Try to select other channels and check whether the TV problem itself or not.
But. Video is ok without audio| •Increase the volume.
•Check the TV is in mute mode or not, and please press the mute button to make sound resume.
But. Audio is ok color error or no picture| •Increase contrast and brightness
Snow statics picture and noise| •Check the antenna at the back of TV is connected or not.
Level broken line| •Vaccum, such as hair drier. Maybe has electrical appliance interfere. please turn off these kinds of electrical appliance, cleaner and w on.
Image or•Dual “simulacrum’ The N no
response with the Remote| •Perhaps the location for the antenna is not good. Use the tall beamed antenna can be improved quality of the display image.
•Operate the remote direct to the remote sensor on the TV If still no response for TV. please check if the plastic bag on the remote take or not. And check if the location for the battery is correct. Change the new battery.
•The N will shift to the STAND BY if no response from the remote in the few minutes.
No video in (PC Mode)| •Please check if the display cable connect to the VGA correcte.
•Please check if there has the bend on the display cable.
Vertical twinkling (PC Mode)| •Enter the main menu. Use the clock regulator for the video display noise to eliminate the vertical line.
Horizontal ripping (PC Mode)| •Adjust the audio sound horizontal in the main menu to dear the horizontal ripping line.
The screen in too bright or too dark (PC Mode)| •Adjust the contrast ratio or brightness in the main menu.
Pc Function no response| •Check the computer setting in the state of compatible display resolution.’
Ripping line In RCA connecting| •Please use good quality connded cable
Problem still Problem still exist| •Unplug the power cable and wait for 30 second. then connect. If there is some problem with our TV, do not repair it by yourself, please contact with the customer service center.

There will be complete picture and the brightness will come down if the TV is in Note. So please do not keep the TV in a state fo same, the static picture for too long time. Menu or same picture that has much difference in bnghtness and contrast ratio for too long time.
Note : TV panel is built with very high precision technology giving you fine picture details in vibrant color, Occasionally, a few non-active pixel may apper on the screen as fixed point fo red, green, blue or white. Please note this does not affect the performance of the product.

WARRANTY CARD
Customer’s Copy
PRODUCT/Model…………………..
Serial/Barcode…………….
Store Purchase……………
Invoice No.:…………………
Date Purchased:……………
Owner’s Name:……………..
Address:…………………..
Tel. No.:……………………….
Mobile Phone No…………………..
SERVICE RECORD

DATE| REF| COMPLAINTS| VERIFIED DEFECTS| |TECH REMARKS
---|---|---|---|---
| | | |
| | | |
| | | |
| | | |

WARRANTY CERTIFICATE

[ LED TELEVISION ]
TERMS AND CONDITIONS

  1. This warranty covers parts for ……………………………. free of service for a period of……………………
  2. Warranty coverage for LED Panelis___The following are not covered by this warrany parts and ‘accessories such as knobs, handies, glass components, plasticiwaoden cabinet, detachable antennas, REMOTE CONTROL, and other external parts.
  3. This warranty does not cover damage such as dents, scratches, & breakage due to mishandiing: as wellas other damage due to misused , abused, improper operation or product utity under circumstances under than what s contained and specifid in the Operating Manual, as well as damages caused by fir, force major and other nature cases, In such cases, MMC shallnot be held liable for any or all consequental, financial, property or moral damages as a result there of
  4. This warranty shall be void if the unit s altered, modified,or repaired by an authorised service establishment or technician.
  5. There wil be corresponding charges on parts replacement beyond the warranty period.
  6. Cost Incurred from HOME SERVICE to be paid by the customer.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals