POWERWAVE TrayV2 Switch OLED Glass Screen Protector with Alignment Tray Instructions

POWERWAVE TrayV2 Switch OLED Glass Screen Protector with Alignment Tray

Product Information

The Switch OLED Glass Screen Protector with Alignment Tray is designed to provide protection for the Switch OLEDTM console screen. It comes with an alignment tray, two glass screen protectors, two screen protector guide stickers, two dust removal stickers, and two screen cleaning wipes (one wet and one dry). The alignment tray ensures precise placement of the glass screen protector and helps to prevent air bubbles during installation.

Product Usage Instructions

1. Scan the QR code provided to access the installation video for visual guidance.
2. Place the alignment tray face down, ensuring that the Powerwave logo is positioned in the lower right corner.
3. Align the blue screen protector guide sticker with the center cut-out on the back of the alignment tray and stick it down.
4. Flip the alignment tray over and place the glass screen protector in the tray, with the protective film-covered side facing towards you. Press down gently over the blue guide sticker to hold the glass screen protector in place.
5. Clean the Switch OLEDTM console screen using the provided wet and dry screen cleaning wipes. Once cleaned, peel off the protective film from the glass screen protector.
6. Place the assembled alignment tray and glass screen protector face down over the Switch OLEDTM screen, ensuring that the blue guide sticker is facing toward you.
7. Slide your finger across the blue guide sticker in the direction of the arrows while pressing down to stick the glass screen protector to the Switch OLEDTM screen.
8. Once the glass screen protector is attached, remove the blue guide sticker from the alignment tray.
9. Remove the alignment tray from the Switch OLEDTM screen, scrape out any air bubbles from the glass screen protector, and wipe it clean with a cloth.

Contains

• 1 x Alignment Tray
• 2 x Screen Protector Guide Stickers
• 2 x Glass Screen Protectors
• 2 x Dust Removal Stickers
• 2 x Screen Cleaning Wipes (1 x wet & 1 x dry)

Installation Instructions

1. Place the alignment tray face down as shown below.
   • The Powerwave logo should be positioned in the lower right corner of the alignment tray
2. Align the blue screen protector guide sticker with the center cut-out on the back of the alignment tray and stick it down.
3. Flip the alignment tray over & place the glass screen protector in the tray with the protective film-covered side facing towards you. Press down gently over the blue guide sticker to hold the glass screen protector in place.
4. Clean the Switch OLED™ console screen with the wet (1) and dry (2) screen cleaning wipes. Once done peel the protective film from the glass screen protector.
5. Place the assembled alignment tray and glass screen protector face down, over the Switch OLED™ screen with the blue guide sticker facing towards you.
6. Slide your finger, while pressing down, across the blue guide sticker in the direction of the arrows, to stick the glass screen protector to the Switch OLED™ screen.
7. Once the glass screen protector is attached, remove the blue guide sticker from the alignment tray
8. Remove the alignment tray from the Switch OLED™ screen, scrape out any air bubbles from the glass screen protector and wipe with a cloth to clean.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>