POWERWAVE Elite Grip Controller Instructions
- July 2, 2024
- POWERWAVE
Table of Contents
POWERWAVE Elite Grip Controller
Specifications
- Input Power: [Specify the input power requirements here]
- Operating Current: [Specify the operating current details]
- Operating Temperature: [Specify the operating temperature range]
- Storage Temperature: [Specify the storage temperature range]
Product Information
[Provide a brief overview of the product, its features, and intended use.]
Frequently Asked Questions (FAQ)
Q: What should I do if the device overheats?
A: If the device overheats, immediately disconnect the power source and allow
it to cool down before attempting to use it again.
Product Overview
Featuring hall effect joysticks to eliminate drift, the Powerwave Switch Pro Grip Controller is engineered to maximise your gaming experience. Enjoy turbo functionality, programmable buttons, dual motor vibration, six-axis gyroscope and ergonomic grip all whilst being able to charge and play through the fast charge compatible USB-C port. Conveniently stores up to 4 game cartridges, simply slide your Nintendo Switch’™ into the grip to begin taking your game to the next level! Product Layout
Product Layout
Instructions For Setup
Before use, turn on the Nintendo Switch™* console and adjust the system settings to toggle the Pro Controller Wired Communication controller option to “On”.
Instructions For Use
- Insert the Nintendo Switch*” console screen into the Elite Grip Controller, avoiding holding down or moving the joysticks or buttons during connection.
- Align the USB Type-C connector on the controller into the charging port on the console.
- Calibrate the controller joystick and gyroscope in the following menus, following the on-screen prompts for each joystick and motion sensitivity;
HOME Menu > System Settings > Controllers & Sensors > Calibrate Control Sticks
H
OME Menu > System Settings > Controllers & Sensors > Calibrate Motion Controls
Turbo Function
The following buttons are supported for Turbo functionality; A, B, X, Y, R, ZR, L & ZL
SETTING TURBO
- Hold down the supported button you wish to activate Turbo on, and briefly press the Turbo button once to activate semi-automatic Turbo (burst fire when selected button is pressed).
- Repeating this step again will activate fully-automatic Turbo on the supported selected button. This means pressing the selected button will continue to fire until released.
- Repeating this step a third time will clear Turbo functionality from the selected button.
CLEARING ALL TURBO
Hold the Turbo button for 5 seconds until the controller vibrates to clear Turbo functionality from all buttons.
TURBO SPEED ADJUSTMENT
- Low Speed: 5 Bursts Per Second.
- Medium Speed: 12 Bursts Per Second.
- High Speed: 20 Bursts Per Second.
- The default Turbo speed is Medium Speed.
- To adjust up, press Turbo & the Up
- Directional buttons simultaneously until the controller vibrates.
- To adjust down, press Turbo & the Down
- Directional buttons simultaneously until the controller vibrates.
- The controller will default to the last Turbo speed mode used.
Macro Programming Function
- There are four programmable custom buttons. Each Custom button can be programmed with up to 16 button presses.
- The following buttons are supported for Macro Functionality;+, – , A, B, X, V. R, ZR, L, ZL, Directional
- Buttons (Up, Down, Left, Right), Left Joystick Press & Right Joystick Press.
SETTING MACRO PROGRAMMING
- Press and hold the Macro Program button for 2 seconds until the white LED Indicator blinks slowly to indicate it is now in programming mode.
- Press the desired combination of buttons in sequence. The white LED Indicator will blink quickly.
- Once the combination of buttons has been entered, press the Custom button you would like to assign the programming to and the white LED Indicator will turn solid indicating successful programming of that sequence to the selected Custom button.
- The Custom button when pressed, will now automatically complete the sequence in the same speed they were programmed with.
CLEARING MACRO PROGRAMMING
- Hold down the Custom button you would like to clear and then press the Macro Program button. The white LED Indicator blinks or turns off to indicate successful clearing of that particular Custom button.
- To clear all Custom button macro programming, hold the Macro Program button for 5 seconds until the white LED Indicator turns off completely. This indicates all macro programming has been cleared.
Controller Vibration
- To turn off controller vibration, please select this option in System Settings;
- HOME Menu > System Settings > Controllers & Sensors > Controller Vibration
- There are 4 vibration intensity settings -Weak, Medium, Strong & Off.
- Controller vibration is adjustable and defaults to the last setting used.
- Please adjust the vibration as per the below instructions to suit your preference.
- To adjust controller vibration, press and hold the Z, ZL, R & ZR buttons simultaneously for 3 seconds.
- Each adjustment will cycle through the 4 available intensity modes.
Charging
The USB Type-C port supports both fast charging and regular charging speeds.
Specifications
Product Care and Safety
- USB Type-C port supports both fast charging and regular charging speeds.
- Keep your user manual for future reference.
- Unplug the input power when console is fully charged or notin use.
- Use this device solely for its intended purposes.
- Keep away from hot surfaces and naked flames and liquids.
- When not in use, store in a cool, dry environment away from direct sunlight.
- Do not apply force or put heavy objects onto the product.
- If the product is damaged, broken or immersed in water, stop use immediately.
- Do not attempt to repair, modify or disassemble the product.
- Clean with a soft, dry cloth to prevent dirt build-up. Do not use chemical solvents, detergents or alcohol.
- Responsibly supervise children when using the product to ensure appropriate use.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>