AIPHONE IX-DVF-PR Vandal-Resistant Flush Mount IP 1.23 MP Video Door Station Installation Guide
- June 12, 2024
- AIPHONE
Table of Contents
AIPHONE IX-DVF-PR Vandal-Resistant Flush Mount IP 1.23 MP Video Door
Station
Product Information
The IX-DVF-PR is an IX Series video door station with a built-in AC-PROX-1G proximity card reader. The card reader uses a standard Wiegand interface to connect to a compatible access control system.
Names and Functions
- Camera
- Microphone
- White LED for low light illumination
- Speaker
- Function Indicator
- Call Button
- Card Reader
Features
- Camera with manual vertical adjustment +15º, 0º, or -8º
- Two contact outputs, six trigger inputs
- Built-in RFID proximity reader
- Stainless steel faceplate
- SIP and ONVIF® Profile S compliant
- MicroSD™ card slot
- 802.3af PoE
Package Contents
Installation and Configuration
- IX-DVF-PR Dimensions: 11-11/16″ H x 7″ W x 1-15/16″ D
- Back Box Dimensions: 10-7/16″ H x 5-13/16″ W x 2-3/8″ D
- For flush mounting, recess the supplied back box into the wall, then attach the mounting bracket using the four provided bracket screws.
- For surface mounting, use the SBX-IDVFRA surface mount box. This box can mount to a standard single-gang box or to any flat surface.
- The IX-DVF-PR is configured as an IX-DVF door station using the IX Support Tool or IXG Support Tool. Refer to the appropriate Quick Start Programming Guide for instructions.
Wiring Diagram
Specifications
- Card Reader
- Reader Type: 125-kHz Proximity Reader
- Reader Model: AC-PROX-1G
- Power Source: 5 ~ 16V DC
- Current: 30mA (average); 75mA (peak)
- Terminations: Color-coded pre-wired pigtail
- Wiring Distance: 500′
- Operating Temp: -31°~150°F (-35°~66°C)
- Operating Humidity: 0% to 90% relative humidity non-condensing
- Door Station
- Power Source: PoE (IEEE 802.3af class 0) or 24V DC (PS-2420UL)
- Power Draw: 5.28W
- Camera Unit: 1/3″ CMOS 1.23 megapixel
- Min. Illumination: 5 Lux
- Terminations: RJ45 jack for audio/video Pigtail for door release
- Operating Temp: -40°~140°F (-40°~60°C)
- Wiring Distance: 330′
- Dimensions: 11-11/16″ H x 7″ W x 1-15/16″ D
- w/ SBX-IDVFRA: 11-11/16″ H x 7″ W x 3-5/16″ D
FCC WARNING
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference that may cause undesired operation.
For proper regulatory compliance, the drain wire should be disconnected at the power supply end of the cable. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
For more details about the features and information above, please contact Technical Support.
Aiphone Corporation www.aiphone.com | 800-692-0200
Read User Manual Online (PDF format)
Loading......